linux-toradex.git/drivers/bluetooth/virtio_bt.c, branch v6.11

virtio: rename virtio_find_vqs_info() to virtio_find_vqs()

2024-07-17T09:20:58+00:00

Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().

Signed-off-by: Jiri Pirko 
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin

virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()

2024-07-17T09:20:58+00:00

Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().

Suggested-by: Xuan Zhuo 
Signed-off-by: Jiri Pirko 
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2024-05-23T19:04:36+00:00

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

bluetooth: virtio: drop owner assignment

2024-05-22T12:31:16+00:00

virtio core already sets the .owner, so driver does not need to.

Signed-off-by: Krzysztof Kozlowski 

Message-Id: <20240331-module-owner-virtio-v2-7-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin

Bluetooth: HCI: Remove HCI_AMP support

2024-05-14T14:54:49+00:00

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz

virtio_bt: call scheduler when we free unused buffs

2023-07-03T16:15:12+00:00

For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb51043945 ("virtio_net: suppress cpu stall
when free_unused_bufs").

This driver is similar so theoretically the same logic applies.

Signed-off-by: Xianting Tian 
Message-Id: <20230609131817.712867-4-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin

virtio_bt: Fix alignment in configuration struct

2022-12-12T22:19:23+00:00

The current version of the configuration structure has unaligned
16-bit fields, but according to the specification [1], access to
the configuration space must be aligned.

Add a second, aligned  version of the configuration structure
and a new feature bit indicating that this version is being used.

[1] https://docs.oasis-open.org/virtio/virtio/v1.1/virtio-v1.1.pdf

Signed-off-by: Igor Skalkin 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: virtio_bt: fix device removal

2022-12-12T22:19:23+00:00

Device removal is clearly out of virtio spec: it attempts to remove
unused buffers from a VQ before invoking device reset. To fix, make
open/close NOPs and do all cleanup/setup in probe/remove.

NB: This is a hacky way to handle this - virtbt_{open,close} as NOP is
not really what a driver is supposed to be doing. These are transport
enable/disable callbacks from the BT core towards the driver. It maps to
a device being enabled/disabled by something like bluetoothd for
example. So if disabled, users expect that no resources/queues are in
use.  It does work with all other transports like USB, SDIO, UART etc.
There should be no buffer used if the device is powered off. We also
don’t have any USB URBs in-flight if the transport is not active.

The way to implement a proper fix would be using vq reset if supported,
or even using a full device reset.

The cost of the hack is a single skb wasted on an unused bt device.

NB2: with this fix in place driver still suffers from a race condition
if an interrupt triggers while device is being reset.  To fix, in the
virtbt_close() callback we should deactivate all interrupts.  To be
fixed.

squashed fixup: bluetooth: virtio_bt: fix an error code in probe()

Signed-off-by: Dan Carpenter 
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: Michael S. Tsirkin 
Message-Id: <20220811080943.198245-1-mst@redhat.com>
Signed-off-by: Luiz Augusto von Dentz 
Tested-by: Igor Skalkin

Bluetooth: virtio_bt: Use skb_put to set length

2022-11-02T21:15:42+00:00

By using skb_put we ensure that skb->tail is set
correctly. Currently, skb->tail is always zero, which
leads to errors, such as the following page fault in
rfcomm_recv_frame:

    BUG: unable to handle page fault for address: ffffed1021de29ff
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751)

Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster 
Signed-off-by: Luiz Augusto von Dentz

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2022-01-18T08:05:48+00:00

Pull virtio updates from Michael Tsirkin:
 "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.

   - partial support for < MAX_ORDER - 1 granularity for virtio-mem

   - driver_override for vdpa

   - sysfs ABI documentation for vdpa

   - multiqueue config support for mlx5 vdpa

   - and misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
  vdpa/mlx5: Fix tracking of current number of VQs
  vdpa/mlx5: Fix is_index_valid() to refer to features
  vdpa: Protect vdpa reset with cf_mutex
  vdpa: Avoid taking cf_mutex lock on get status
  vdpa/vdpa_sim_net: Report max device capabilities
  vdpa: Use BIT_ULL for bit operations
  vdpa/vdpa_sim: Configure max supported virtqueues
  vdpa/mlx5: Report max device capabilities
  vdpa: Support reporting max device capabilities
  vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
  vdpa: Add support for returning device configuration information
  vdpa/mlx5: Support configuring max data virtqueue
  vdpa/mlx5: Fix config_attr_mask assignment
  vdpa: Allow to configure max data virtqueues
  vdpa: Read device configuration only if FEATURES_OK
  vdpa: Sync calls set/get config/status with cf_mutex
  vdpa/mlx5: Distribute RX virtqueues in RQT object
  vdpa: Provide interface to read driver features
  vdpa: clean up get_config_size ret value handling
  virtio_ring: mark ring unused on error
  ...