linux-toradex.git/drivers/bluetooth, branch v4.11-rc1

btmrvl: fix spelling mistake: "actived" -> "activated"

2017-02-18T23:26:37+00:00

trivial fix to spelling mistake in error message

Signed-off-by: Colin Ian King 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_qca: fix spelling mistake: "Spurrious" -> "Spurious"

2017-02-18T19:09:47+00:00

trivial fix to spelling mistake in error message

Signed-off-by: Colin Ian King 
Signed-off-by: Marcel Holtmann

Bluetooth: btmrvl: fix spelling mistake: "caibration" -> "calibration"

2017-02-16T16:38:51+00:00

trivial fix to spelling mistake in BT_ERR error message

Signed-off-by: Colin Ian King 
Signed-off-by: Marcel Holtmann

Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabled

2017-02-16T16:36:31+00:00

The driver only has runtime but no build time dependency with QCOM_SMD &&
QCOM_WCNSS_CTRL. So it can be built for testing purposes if COMPILE_TEST
option is enabled.

This is useful to have more build coverage and make sure that the driver
is not affected by changes that could cause build regressions.

Signed-off-by: Javier Martinez Canillas 
Signed-off-by: Marcel Holtmann

Bluetooth: Add another AR3012 04ca:3018 device

2017-02-16T16:35:23+00:00

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3018 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Dmitry Tunin 
Signed-off-by: Marcel Holtmann 
Cc: stable@vger.kernel.org

Bluetooth: hci_bcm: Add support for BCM2E95 and BCM2E96

2017-02-16T16:34:17+00:00

The BCM2E96 ID is used by the ECS EF20 laptop, and BCM2E95 is present
in the Weibu F3C. Both are now logged as:

     hci0: BCM: chip id 82
     hci0: BCM43341B0 (002.001.014) build 0000
     hci0: BCM (002.001.014) build 0158

The ECS vendor kernel predates the host-wakeup support in hci_bcm but
it explicitly has a comment saying that the GPIO assignment needs to be
reordered for BCM2E96:
 1. (not used in vendor driver)
 2. Device wakeup
 3. Shutdown

For both devices in question, the DSDT has these GPIOs listed in order
of GpioInt, GpioIo, GpioIo. And if we use the first one listed (GpioInt)
as the host wakeup, that interrupt handler fires while doing bluetooth
I/O.

I am assuming the convention of GPIO ordering has been changed for these
new device IDs, so lets use the new ordering on such devices.

Signed-off-by: Daniel Drake 
Signed-off-by: Marcel Holtmann

Bluetooth: btbcm: Add a delay for module reset

2017-02-16T16:32:25+00:00

Some btbcm devices require more time to complete its reset process.
They won't reply any hci command until reset is done.

[ 17.218554] Bluetooth: hci0 command 0x1001 tx timeout
[ 25.214999] Bluetooth: hci0: BCM: Reading local version info failed (-110)

Signed-off-by: Wen-chien Jesse Sung 
Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Add support for 413c:8143

2017-02-16T16:30:45+00:00

This is a Boardcom module and requires patchram to work.

T: Bus=01 Lev=03 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=413c ProdID=8143 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=20689D1FAF94
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Wen-chien Jesse Sung 
Signed-off-by: Marcel Holtmann

btmrvl: use dt's irqflags for wakeup pin

2017-02-16T16:25:20+00:00

Use irqflags parsed from dt.

Signed-off-by: Jeffy Chen 
Reviewed-by: Brian Norris 
Signed-off-by: Marcel Holtmann

btmrvl: set irq_bt to -1 when failed to parse it

2017-02-16T16:25:20+00:00

The irq_of_parse_and_map will return 0 as a invalid irq.

Set irq_bt to -1 in this case, so that the btmrvl resume/suspend code
would not try to enable/disable it.

Signed-off-by: Jeffy Chen 
Reviewed-by: Brian Norris 
Signed-off-by: Marcel Holtmann