linux-toradex.git/drivers/bluetooth, branch v5.3-rc7

Bluetooth: hci_qca: Skip 1 error print in device_want_to_sleep()

2019-08-14T13:50:46+00:00

Don't fall through to print error message when receive sleep indication
in HCI_IBS_RX_ASLEEP state, this is allowed behavior.

Signed-off-by: Rocky Liao 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Reset download type to default

2019-08-12T17:07:15+00:00

This patch will reset the download flag to default value
before retrieving the download mode type.

Fixes: 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download")
Signed-off-by: Balakrishna Godavarthi 
Tested-by: Claire Chang 
Reviewed-by: Claire Chang 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: release_firmware after qca_inject_cmd_complete_event

2019-08-12T16:36:09+00:00

commit 32646db8cc28 ("Bluetooth: btqca: inject command complete event
during fw download") added qca_inject_cmd_complete_event() for certain
qualcomm chips. However, qca_download_firmware() will return without
calling release_firmware() in this case.

This leads to a memory leak like the following found by kmemleak:

unreferenced object 0xfffffff3868a5880 (size 128):
  comm "kworker/u17:5", pid 347, jiffies 4294676481 (age 312.157s)
  hex dump (first 32 bytes):
    ac fd 00 00 00 00 00 00 00 d0 7e 17 80 ff ff ff  ..........~.....
    00 00 00 00 00 00 00 00 00 59 8a 86 f3 ff ff ff  .........Y......
  backtrace:
    [<00000000978ce31d>] kmem_cache_alloc_trace+0x194/0x298
    [<000000006ea0398c>] _request_firmware+0x74/0x4e4
    [<000000004da31ca0>] request_firmware+0x44/0x64
    [<0000000094572996>] qca_download_firmware+0x74/0x6e4 [btqca]
    [<00000000b24d615a>] qca_uart_setup+0xc0/0x2b0 [btqca]
    [<00000000364a6d5a>] qca_setup+0x204/0x570 [hci_uart]
    [<000000006be1a544>] hci_uart_setup+0xa8/0x148 [hci_uart]
    [<00000000d64c0f4f>] hci_dev_do_open+0x144/0x530 [bluetooth]
    [<00000000f69f5110>] hci_power_on+0x84/0x288 [bluetooth]
    [<00000000d4151583>] process_one_work+0x210/0x420
    [<000000003cf3dcfb>] worker_thread+0x2c4/0x3e4
    [<000000007ccaf055>] kthread+0x124/0x134
    [<00000000bef1f723>] ret_from_fork+0x10/0x18
    [<00000000c36ee3dd>] 0xffffffffffffffff
unreferenced object 0xfffffff37b16de00 (size 128):
  comm "kworker/u17:5", pid 347, jiffies 4294676873 (age 311.766s)
  hex dump (first 32 bytes):
    da 07 00 00 00 00 00 00 00 50 ff 0b 80 ff ff ff  .........P......
    00 00 00 00 00 00 00 00 00 dd 16 7b f3 ff ff ff  ...........{....
  backtrace:
    [<00000000978ce31d>] kmem_cache_alloc_trace+0x194/0x298
    [<000000006ea0398c>] _request_firmware+0x74/0x4e4
    [<000000004da31ca0>] request_firmware+0x44/0x64
    [<0000000094572996>] qca_download_firmware+0x74/0x6e4 [btqca]
    [<000000000cde20a9>] qca_uart_setup+0x144/0x2b0 [btqca]
    [<00000000364a6d5a>] qca_setup+0x204/0x570 [hci_uart]
    [<000000006be1a544>] hci_uart_setup+0xa8/0x148 [hci_uart]
    [<00000000d64c0f4f>] hci_dev_do_open+0x144/0x530 [bluetooth]
    [<00000000f69f5110>] hci_power_on+0x84/0x288 [bluetooth]
    [<00000000d4151583>] process_one_work+0x210/0x420
    [<000000003cf3dcfb>] worker_thread+0x2c4/0x3e4
    [<000000007ccaf055>] kthread+0x124/0x134
    [<00000000bef1f723>] ret_from_fork+0x10/0x18
    [<00000000c36ee3dd>] 0xffffffffffffffff

Make sure release_firmware() is called aftre
qca_inject_cmd_complete_event() to avoid the memory leak.

Fixes: 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download")
Signed-off-by: Claire Chang 
Reviewed-by: Balakrishna Godavarthi 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_qca: Send VS pre shutdown command.

2019-08-12T16:23:50+00:00

WCN399x chips are coex chips, it needs a VS pre shutdown
command while turning off the BT. So that chip can inform
BT is OFF to other active clients.

Signed-off-by: Harish Bandi 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Use correct byte format for opcode of injected command

2019-08-12T16:23:50+00:00

The opcode of the command injected by commit 32646db8cc28 ("Bluetooth:
btqca: inject command complete event during fw download") uses the CPU
byte format, however it should always be little endian. In practice it
shouldn't really matter, since all we need is an opcode != 0, but still
let's do things correctly and keep sparse happy.

Fixes: 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download")
Reported-by: kbuild test robot 
Signed-off-by: Matthias Kaehlcke 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_qca: Use kfree_skb() instead of kfree()

2019-08-12T16:23:49+00:00

Use kfree_skb() instead of kfree() to free sk_buff.

Fixes: 2faa3f15fa2f ("Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event")
Signed-off-by: Wei Yongjun 
Reviewed-by: Matthias Kaehlcke 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Add a short delay before downloading the NVM

2019-08-12T16:23:49+00:00

On WCN3990 downloading the NVM sometimes fails with a "TLV response
size mismatch" error:

[  174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin
[  174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch

It seems the controller needs a short time after downloading the
firmware before it is ready for the NVM. A delay as short as 1 ms
seems sufficient, make it 10 ms just in case. No event is received
during the delay, hence we don't just silently drop an extra event.

Signed-off-by: Matthias Kaehlcke 
Signed-off-by: Marcel Holtmann

Bluetooth: btusb: Fix error return code in btusb_mtk_setup_firmware()

2019-08-12T16:23:49+00:00

Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Signed-off-by: Wei Yongjun 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_uart: check for missing tty operations

2019-07-31T20:17:33+00:00

Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.

This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.

Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov 
Signed-off-by: Marcel Holtmann 
Reviewed-by: Yu-Chen, Cho 
Tested-by: Yu-Chen, Cho 
Signed-off-by: Linus Torvalds

Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices

2019-07-06T19:44:25+00:00

This adds the support of enabling MT7663U Bluetooth function running
on the top of btusb driver.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0e8d ProdID=7663 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Sean Wang 
Signed-off-by: Marcel Holtmann