linux-toradex.git/drivers/bluetooth, branch v6.0-rc1

Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2022-08-04T19:12:54+00:00

Pull SPDX updates from Greg KH:
 "Here is the set of SPDX comment updates for 6.0-rc1.

  Nothing huge here, just a number of updated SPDX license tags and
  cleanups based on the review of a number of common patterns in GPLv2
  boilerplate text.

  Also included in here are a few other minor updates, two USB files,
  and one Documentation file update to get the SPDX lines correct.

  All of these have been in the linux-next tree for a very long time"

* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
  Documentation: samsung-s3c24xx: Add blank line after SPDX directive
  x86/crypto: Remove stray comment terminator
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
  ...

Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet

2022-07-23T00:14:37+00:00

Fix up the packet type if ISO packets are sent over the bulk endpoint.

Note: This is a stopgap since the Bluetooth specification currently
doesn't define any endpoint to transport ISO packets.

Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btusb: Add support for ISO packets

2022-07-23T00:14:26+00:00

This enabled btusb driver to properly transmit ISO packets.

Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btrtl: Fix typo in comment

2022-07-22T19:55:06+00:00

Delete the repeated word "that" in comments.

Signed-off-by: shaomin Deng 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR

2022-07-22T00:13:56+00:00

Core driver addtionally checks LMP feature bit "Erroneous Data Reporting"
instead of quirk HCI_QUIRK_BROKEN_ERR_DATA_REPORTING to decide if HCI
commands HCI_Read|Write_Default_Erroneous_Data_Reporting are broken, so
remove this unnecessary quirk for fake CSR controllers.

Signed-off-by: Zijun Hu 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA

2022-07-22T00:13:41+00:00

Core driver addtionally checks LMP feature bit "Erroneous Data Reporting"
instead of quirk HCI_QUIRK_BROKEN_ERR_DATA_REPORTING to decide if HCI
commands HCI_Read|Write_Default_Erroneous_Data_Reporting are broken, so
remove this unnecessary quirk for QCA controllers.

The reason why these two HCI commands are broken for QCA controllers is
that feature "Erroneous Data Reporting" is not enabled by their firmware
as shown by below log:

@ RAW Open: hcitool (privileged) version 2.22
< HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 68
  Read Local Supported Commands (0x04|0x0002) ncmd 1
    Status: Success (0x00)
    Commands: 288 entries
......
      Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
      Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
......

< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
> HCI Event: Command Complete (0x0e) plen 4
  Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
    Status: Unknown HCI Command (0x01)

< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 12
  Read Local Supported Features (0x04|0x0003) ncmd 1
    Status: Success (0x00)
    Features: 0xff 0xfe 0x0f 0xfe 0xd8 0x3f 0x5b 0x87
      3 slot packets
......

Signed-off-by: Zijun Hu 
Tested-by: Zijun Hu 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btusb: Add a new VID/PID 0489/e0e2 for MT7922

2022-07-22T00:12:50+00:00

Add VID/PID 0489:e0e2 for MediaTek MT7922 Bluetooth chip. Found and
tested with Asus UM5302TA.

From /sys/kernel/debug/usb/devices:

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0e2 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: He Wang 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for MTK

2022-07-22T00:12:36+00:00

This sets HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for MTK controllers
since SCO appear to not work when using HCI_OP_ENHANCED_SETUP_SYNC_CONN.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215576
Signed-off-by: Yuri D'Elia 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_bcm: Increase host baudrate for CYW55572 in autobaud mode

2022-07-22T00:12:22+00:00

Add device specific data for max baudrate in autobaud mode. This allows the
host to use a baudrate higher than "init speed" when loading FW in autobaud
mode.

The device specific max baudrate in autobaud mode for CYW55572 is set to
921600 bps. Devices without device specific max baudrate in autobaud mode
will use init speed as before. If no device specific init speed has been
specified, it will default to the bcm_proto default 115200 bps.

The increased baud rate improves FW load time. The exact load time will
depend on the specific system and FW being used. As a rough indication,
the FW load time dropped from ~9s @ 115.2kbps to ~1.7s @ 921.6kbps in one
test.

Signed-off-by: Hakan Jansson 
Reviewed-by: Linus Walleij 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_bcm: Prevent early baudrate setting in autobaud mode

2022-07-22T00:12:09+00:00

Always prevent trying to set device baudrate before calling setup() when
using autobaud mode.

This was previously happening for devices which had device specific data
with member no_early_set_baudrate set to 0.

Signed-off-by: Hakan Jansson 
Reviewed-by: Linus Walleij 
Signed-off-by: Luiz Augusto von Dentz