Antenna gain is defined as the antenna’s ability to
increase the Tx power in a given direction. Intel
is certifying its products with fixed reference
antenna peak gain values (3/5dBi). The feature takes
into account the actual antenna gain, and increases
output power values, which results in a performance
improvement.

After firmware download is completed, driver reads from
ACPI table and configures PPAG as required. ACPI table
entry for PPAG is defined as below.

Name (PPAG, Package (0x02)
{
    0x00000001,
    Package (0x02)
    {
        0x00000012, /* Bluetooth Domain */
        0x00000001  /* 1 - Enable PPAG, 0 - Disable PPAG */
    }
})

btmon log:
< HCI Command: Intel Configure Per Platform Antenna Gain (0x3f|0x0219) plen 12
        Mcc: 0x00000000
        Selector: Enable
        Delta: 0x00000000
> HCI Event: Command Complete (0x0e) plen 4
      Intel Configure Per Platform Antenna Gain (0x3f|0x0219) ncmd 1
        Status: Success (0x00)

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth controller attached via the UART is handled by the serdev driver.
Get the wakeup status from the device handle through serdev, instead of the
parent path.

Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the following warnings:

drivers/bluetooth/hci_qca.c:1014:26: warning: cast to restricted __le16
drivers/bluetooth/hci_qca.c:1028:37: warning: cast to restricted __le32

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch adds VID:PID 13d3:3529 to the btusb.c file.

This VID:PID is found in the Realtek RTL8821CE module
(M.2 module AW-CB304NF on an ASUS E210MA laptop)

Output of /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3529 Rev= 1.10
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Moises Cardona <moisesmcardona@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This bluetooth device is found in a combo WLAN/BT card
for a MediaTek 7921e.

The device information:

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0f2 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Their devices claim to support the erroneous data reporting, but don't
actually support the required commands. So blacklist them and add a
quirk.

  < HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
  > HCI Event: Command Status (0x0f) plen 4
        Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
          Status: Unknown HCI Command (0x01)

T:  Bus=02 Lev=02 Prnt=08 Port=02 Cnt=01 Dev#= 10 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=10d7 ProdID=b012 Rev=88.91
S:  Manufacturer=Actions
S:  Product=general adapter
S:  SerialNumber=ACTIONS1234
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=01(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=01(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=01(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=01(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=01(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=01(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either.  Also skip this step if device is powered off
(qca_power_shutdown()).

The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:

  Unable to handle kernel paging request at virtual address
  0072662f67726fd7
  ...
  CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G        W
  6.1.0-rt5-00325-g8a5f56bcfcca #8
  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
  Call trace:
   tty_driver_flush_buffer+0x4/0x30
   serdev_device_write_flush+0x24/0x34
   qca_serdev_shutdown+0x80/0x130 [hci_uart]
   device_shutdown+0x15c/0x260
   kernel_restart+0x48/0xac

KASAN report:

  BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
  Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1

  CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
  6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28
  Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
  Call trace:
   dump_backtrace.part.0+0xdc/0xf0
   show_stack+0x18/0x30
   dump_stack_lvl+0x68/0x84
   print_report+0x188/0x488
   kasan_report+0xa4/0xf0
   __asan_load8+0x80/0xac
   tty_driver_flush_buffer+0x1c/0x50
   ttyport_write_flush+0x34/0x44
   serdev_device_write_flush+0x48/0x60
   qca_serdev_shutdown+0x124/0x274
   device_shutdown+0x1e8/0x350
   kernel_restart+0x48/0xb0
   __do_sys_reboot+0x244/0x2d0
   __arm64_sys_reboot+0x54/0x70
   invoke_syscall+0x60/0x190
   el0_svc_common.constprop.0+0x7c/0x160
   do_el0_svc+0x44/0xf0
   el0_svc+0x2c/0x6c
   el0t_64_sync_handler+0xbc/0x140
   el0t_64_sync+0x190/0x194

Fixes: 7e7bbddd029b ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev <-> devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>