Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
Pull crypto update from Herbert Xu:
"API:
- Add helper for simple skcipher modes.
- Add helper to register multiple templates.
- Set CRYPTO_TFM_NEED_KEY when setkey fails.
- Require neither or both of export/import in shash.
- AEAD decryption test vectors are now generated from encryption
ones.
- New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random
fuzzing.
Algorithms:
- Conversions to skcipher and helper for many templates.
- Add more test vectors for nhpoly1305 and adiantum.
Drivers:
- Add crypto4xx prng support.
- Add xcbc/cmac/ecb support in caam.
- Add AES support for Exynos5433 in s5p.
- Remove sha384/sha512 from artpec7 as hardware cannot do partial
hash"
[ There is a merge of the Freescale SoC tree in order to pull in changes
required by patches to the caam/qi2 driver. ]
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits)
crypto: s5p - add AES support for Exynos5433
dt-bindings: crypto: document Exynos5433 SlimSSS
crypto: crypto4xx - add missing of_node_put after of_device_is_available
crypto: cavium/zip - fix collision with generic cra_driver_name
crypto: af_alg - use struct_size() in sock_kfree_s()
crypto: caam - remove redundant likely/unlikely annotation
crypto: s5p - update iv after AES-CBC op end
crypto: x86/poly1305 - Clear key material from stack in SSE2 variant
crypto: caam - generate hash keys in-place
crypto: caam - fix DMA mapping xcbc key twice
crypto: caam - fix hash context DMA unmap size
hwrng: bcm2835 - fix probe as platform device
crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number
crypto: stm32 - drop pointless static qualifier in stm32_hash_remove()
crypto: chelsio - Fixed Traffic Stall
crypto: marvell - Remove set but not used variable 'ivsize'
crypto: ccp - Update driver messages to remove some confusion
crypto: adiantum - add 1536 and 4096-byte test vectors
crypto: nhpoly1305 - add a test vector with len % 16 != 0
crypto: arm/aes-ce - update IV after partial final CTR block
...
ARM64: hisi: SoC driver updates for 5.1 - Add compatibility support for different FWs in the hisi LPC bus driver * tag 'hisi-drivers-for-5.1' of git://github.com/hisilicon/linux-hisi: bus: hisi_lpc: Don't fail probe for unrecognised child devices Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX drivers update for 5.1: - Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is going to be used on more SoCs than just i.MX8MQ. - Add power domain information into SCU bindings document. - Add support of start/stop a CPU into imx firmware driver. - Support multiple address ranges per child node for imx-weim bus driver. * tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: Add support to start/stop a CPU soc: imx: Break dependency on SOC_IMX8MQ for GPCv2 firmware: imx: scu-pd: add fallback compatible string support dt-bindings: fsl: scu: add imx8qm scu power domain support dt-bindings: fsl: scu: add fallback compatible string for power domain bus: imx-weim: guard against timing configuration conflicts bus: imx-weim: support multiple address ranges per child node dt-bindings: bus: imx-weim: document multiple address ranges per child node soc: imx: gpcv2: handle reset clocks soc: imx: gpcv2: handle additional power-down bits in handshake register Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently for ACPI-based FW we fail the probe for an unrecognised child HID. However, there is FW in the field with LPC child devices having fake HIDs, namely "IPI0002", which was an IPMI device invented to support the initial out-of-tree LPC host driver, different from the final mainline version. To provide compatibility support for these dodgy FWs, just discard the unrecognised HIDs instead of failing the probe altogether. Tested-by: Zengruan Ye <yezengruan@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x2f8/0x388
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
Data Access in Supervisor mode during Functional access
...
__pm_runtime_idle
omap_dm_timer_disable
pwm_omap_dmtimer_start
pwm_omap_dmtimer_enable
pwm_apply_state
pwm_vibrator_start
pwm_vibrator_play_work
This is because the timer that pwm-omap-dmtimer is using is now being
probed with ti-sysc interconnect target module instead of omap_device
and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
compatible with what omap_device has been doing.
We could fix this by reverting the timer changes and have the timer
probe again with omap_device. Or we could add more quirk handling to
ti-sysc driver. But as these options don't work nicely as longer term
solutions, let's just make timers probe with ti-sysc without any
quirks.
To do this, all we need to do is remove quirks for timers for ti-sysc,
and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
We should not use pm_runtime_irq_safe() anyways for drivers as it will
take a permanent use count on the parent device blocking the parent
devices from idling and has been forcing ti-sysc driver to use a
quirk flag.
Note that we will move the timer data to DEBUG section later on in
clean-up patches.
Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-By: Andreas Kemnade <andreas@kemnade.info>
Tested-By: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Allocatable devices can be acquired by drivers on the fsl-mc bus using the fsl_mc_portal_allocate or fsl_mc_object_allocate functions. Add a device link between the consumer device and the supplier device so that proper resource management is achieved. Also, adding a link between these devices ensures that a proper unbind order is respected (ie before the supplier device is unbound from its respective driver all consumer devices will be notified and unbound first). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
When specifying weim child devices, there is a risk that more than
one timing setting is specified for the same chip select.
The driver cannot support such a configuration.
In case of conflict, this patch will print a warning to the log,
and will ignore the child node in question.
In this example, node acme@1 will be ignored, as it tries to modify
timing settings for CS0:
&weim {
acme@0 {
compatible = "acme,whatever";
reg = <0 0 0x100>;
fsl,weim-cs-timing = <something>;
};
acme@1 {
compatible = "acme,whatnot";
reg = <0 0x500 0x100>;
fsl,weim-cs-timing = <something else>;
};
};
However in this example, the driver will be happy:
&weim {
acme@0 {
compatible = "acme,whatever";
reg = <0 0 0x100>;
fsl,weim-cs-timing = <something>;
};
acme@1 {
compatible = "acme,whatnot";
reg = <0 0x500 0x100>;
fsl,weim-cs-timing = <something>;
};
};
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ensure that timing values for the child node are applied to
all chip selects in the child's address ranges.
Note that this does not support multiple timing settings per
child; this can be added in the future if required.
Example:
&weim {
acme@0 {
compatible = "acme,whatever";
reg = <0 0 0x100>, <0 0x400000 0x800>,
<1 0x400000 0x800>;
fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
0x00000000 0xa0000240 0x00000000>;
};
};
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>