linux-toradex.git/drivers/char, branch v4.16 Linux kernel for Apalis and Colibri modules tpm: fix potential buffer overruns caused by bit glitches on the bus 2018-02-26T23:43:46+00:00 Jeremy Boone jeremy.boone@nccgroup.trust 2018-02-08T20:28:08+00:00 3be23274755ee85771270a23af7691dc9b3a95db Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. If a bit does flip it could cause an overrun if it's in one of the size parameters, so sanity check that we're not overrunning the provided buffer when doing a memcpy(). Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> 
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the bus 2018-02-26T23:43:45+00:00 Jeremy Boone jeremy.boone@nccgroup.trust 2018-02-08T20:29:09+00:00 6d24cd186d9fead3722108dec1b1c993354645ff Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> 
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus 2018-02-26T23:43:44+00:00 Jeremy Boone jeremy.boone@nccgroup.trust 2018-02-08T20:30:01+00:00 9b8cb28d7c62568a5916bdd7ea1c9176d7f8f2ed Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> 
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus 2018-02-26T23:43:44+00:00 Jeremy Boone jeremy.boone@nccgroup.trust 2018-02-08T20:31:16+00:00 f9d4d9b5a5ef2f017bc344fb65a58a902517173b Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> 
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
tpm_tis: fix potential buffer overruns caused by bit glitches on the bus 2018-02-26T23:43:43+00:00 Jeremy Boone jeremy.boone@nccgroup.trust 2018-02-08T20:32:06+00:00 6bb320ca4a4a7b5b3db8c8d7250cc40002046878 Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> 
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-02-15T01:02:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-02-15T01:02:15+00:00 d4667ca142610961c89ae7c41a823b3358fcdd0e Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar: "Here's the latest set of Spectre and PTI related fixes and updates: Spectre: - Add entry code register clearing to reduce the Spectre attack surface - Update the Spectre microcode blacklist - Inline the KVM Spectre helpers to get close to v4.14 performance again. - Fix indirect_branch_prediction_barrier() - Fix/improve Spectre related kernel messages - Fix array_index_nospec_mask() asm constraint - KVM: fix two MSR handling bugs PTI: - Fix a paranoid entry PTI CR3 handling bug - Fix comments objtool: - Fix paranoid_entry() frame pointer warning - Annotate WARN()-related UD2 as reachable - Various fixes - Add Add Peter Zijlstra as objtool co-maintainer Misc: - Various x86 entry code self-test fixes - Improve/simplify entry code stack frame generation and handling after recent heavy-handed PTI and Spectre changes. (There's two more WIP improvements expected here.) - Type fix for cache entries There's also some low risk non-fix changes I've included in this branch to reduce backporting conflicts: - rename a confusing x86_cpu field name - de-obfuscate the naming of single-TLB flushing primitives" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/entry/64: Fix CR3 restore in paranoid_exit() x86/cpu: Change type of x86_cache_size variable to unsigned int x86/spectre: Fix an error message x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping selftests/x86/mpx: Fix incorrect bounds with old _sigfault x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]() x86/speculation: Add <asm/msr-index.h> dependency nospec: Move array_index_nospec() parameter checking into separate macro x86/speculation: Fix up array_index_nospec_mask() asm constraint x86/debug: Use UD2 for WARN() x86/debug, objtool: Annotate WARN()-related UD2 as reachable objtool: Fix segfault in ignore_unreachable_insn() selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory selftests/x86/pkeys: Remove unused functions selftests/x86: Clean up and document sscanf() usage selftests/x86: Fix vDSO selftest segfault for vsyscall=none x86/entry/64: Remove the unused 'icebp' macro ... 
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
 "Here's the latest set of Spectre and PTI related fixes and updates:

  Spectre:
   - Add entry code register clearing to reduce the Spectre attack
     surface
   - Update the Spectre microcode blacklist
   - Inline the KVM Spectre helpers to get close to v4.14 performance
     again.
   - Fix indirect_branch_prediction_barrier()
   - Fix/improve Spectre related kernel messages
   - Fix array_index_nospec_mask() asm constraint
   - KVM: fix two MSR handling bugs

  PTI:
   - Fix a paranoid entry PTI CR3 handling bug
   - Fix comments

  objtool:
   - Fix paranoid_entry() frame pointer warning
   - Annotate WARN()-related UD2 as reachable
   - Various fixes
   - Add Add Peter Zijlstra as objtool co-maintainer

  Misc:
   - Various x86 entry code self-test fixes
   - Improve/simplify entry code stack frame generation and handling
     after recent heavy-handed PTI and Spectre changes. (There's two
     more WIP improvements expected here.)
   - Type fix for cache entries

  There's also some low risk non-fix changes I've included in this
  branch to reduce backporting conflicts:

   - rename a confusing x86_cpu field name
   - de-obfuscate the naming of single-TLB flushing primitives"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  x86/entry/64: Fix CR3 restore in paranoid_exit()
  x86/cpu: Change type of x86_cache_size variable to unsigned int
  x86/spectre: Fix an error message
  x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
  selftests/x86/mpx: Fix incorrect bounds with old _sigfault
  x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
  x86/speculation: Add <asm/msr-index.h> dependency
  nospec: Move array_index_nospec() parameter checking into separate macro
  x86/speculation: Fix up array_index_nospec_mask() asm constraint
  x86/debug: Use UD2 for WARN()
  x86/debug, objtool: Annotate WARN()-related UD2 as reachable
  objtool: Fix segfault in ignore_unreachable_insn()
  selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
  selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
  selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
  selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
  selftests/x86/pkeys: Remove unused functions
  selftests/x86: Clean up and document sscanf() usage
  selftests/x86: Fix vDSO selftest segfault for vsyscall=none
  x86/entry/64: Remove the unused 'icebp' macro
  ...
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping 2018-02-15T00:15:52+00:00 Jia Zhang qianyue.zj@alibaba-inc.com 2018-01-01T01:52:10+00:00 b399151cb48db30ad1e0e93dd40d68c6d007b637 x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11T22:34:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-02-11T22:34:03+00:00 a9a08845e9acbd224e4ee466f5c1275ed50054e8 This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2018-02-06T17:59:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-02-06T17:59:40+00:00 105cf3c8c6264dce4bcdab877feb8037bc4109b1 Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ... 
Pull PCI updates from Bjorn Helgaas:

 - skip AER driver error recovery callbacks for correctable errors
   reported via ACPI APEI, as we already do for errors reported via the
   native path (Tyler Baicar)

 - fix DPC shared interrupt handling (Alex Williamson)

 - print full DPC interrupt number (Keith Busch)

 - enable DPC only if AER is available (Keith Busch)

 - simplify DPC code (Bjorn Helgaas)

 - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
   Helgaas)

 - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
   Helgaas)

 - move ASPM internal interfaces out of public header (Bjorn Helgaas)

 - allow hot-removal of VGA devices (Mika Westerberg)

 - speed up unplug and shutdown by assuming Thunderbolt controllers
   don't support Command Completed events (Lukas Wunner)

 - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
   Jay Cornwall)

 - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)

 - clean up PCI DMA interface usage (Christoph Hellwig)

 - remove PCI pool API (replaced with DMA pool) (Romain Perier)

 - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
   Kaya)

 - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)

 - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)

 - remove warnings on sysfs mmap failure (Bjorn Helgaas)

 - quiet ROM validation messages (Alex Deucher)

 - remove redundant memory alloc failure messages (Markus Elfring)

 - fill in types for compile-time VGA and other I/O port resources
   (Bjorn Helgaas)

 - make "pci=pcie_scan_all" work for Root Ports as well as Downstream
   Ports to help AmigaOne X1000 (Bjorn Helgaas)

 - add SPDX tags to all PCI files (Bjorn Helgaas)

 - quirk Marvell 9128 DMA aliases (Alex Williamson)

 - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)

 - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
   Cassel)

 - use DMA API to get MSI address for DesignWare IP (Niklas Cassel)

 - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)

 - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)

 - add support for ARTPEC-7 SoC (Niklas Cassel)

 - add endpoint-mode support for ARTPEC (Niklas Cassel)

 - add Cadence PCIe host and endpoint controller driver (Cyrille
   Pitchen)

 - handle multiple INTx status bits being set in dra7xx (Vignesh R)

 - translate dra7xx hwirq range to fix INTD handling (Vignesh R)

 - remove deprecated Exynos PHY initialization code (Jaehoon Chung)

 - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)

 - fix NULL pointer dereference in iProc BCMA driver (Ray Jui)

 - fix Keystone interrupt-controller-node lookup (Johan Hovold)

 - constify qcom driver structures (Julia Lawall)

 - rework Tegra config space mapping to increase space available for
   endpoints (Vidya Sagar)

 - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)

 - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)

 - add support for Global Fabric Manager Server (GFMS) event to
   Microsemi Switchtec switch driver (Logan Gunthorpe)

 - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)

* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
  PCI: endpoint: Fix EPF device name to support multi-function devices
  PCI: endpoint: Add the function number as argument to EPC ops
  PCI: cadence: Add host driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
  PCI: Add vendor ID for Cadence
  PCI: Add generic function to probe PCI host controllers
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  ...
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux 2018-02-02T01:48:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-02-02T01:48:47+00:00 4bf772b14675411a69b3c807f73006de0fe4b649 Pull drm updates from Dave Airlie: "This seems to have been a comparatively quieter merge window, I assume due to holidays etc. The "biggest" change is AMD header cleanups, which merge/remove a bunch of them. The AMD gpu scheduler is now being made generic with the etnaviv driver wanting to reuse the code, hopefully other drivers can go in the same direction. Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff elsewhere. Core: - Add .last_close and .output_poll_changed helpers to reduce driver footprints - Fix plane clipping - Improved debug printing support - Add panel orientation property - Update edid derived properties at edid setting - Reduction in fbdev driver footprint - Move amdgpu scheduler into core for other drivers to use. i915: - Selftest and IGT improvements - Fast boot prep work on IPS, pipe config - HW workarounds for Cannonlake, Geminilake - Cannonlake clock and HDMI2.0 fixes - GPU cache invalidation and context switch improvements - Display planes cleanup - New PMU interface for perf queries - New firmware support for KBL/SKL - Geminilake HW workaround for perforamce - Coffeelake stolen memory improvements - GPU reset robustness work - Cannonlake horizontal plane flipping - GVT work amdgpu/radeon: - RV and Vega header file cleanups (lots of lines gone!) - TTM operation context support - 48-bit GPUVM support for Vega/RV - ECC support for Vega - Resizeable BAR support - Multi-display sync support - Enable swapout for reserved BOs during allocation - S3 fixes on Raven - GPU reset cleanup and fixes - 2+1 level GPU page table amdkfd: - GFX7/8 SDMA user queues support - Hardware scheduling for multiple processes - dGPU prep work rcar: - Added R8A7743/5 support - System suspend/resume support sun4i: - Multi-plane support for YUV formats - A83T and LVDS support msm: - Devfreq support for GPU tegra: - Prep work for adding Tegra186 support - Tegra186 HDMI support - HDMI2.0 and zpos support by using generic helpers tilcdc: - Misc fixes omapdrm: - Support memory bandwidth limits - DSI command mode panel cleanups - DMM error handling exynos: - drop the old IPP subdriver. etnaviv: - Occlusion query fixes - Job handling fixes - Prep work for hooking in gpu scheduler armada: - Move closer to atomic modesetting - Allow disabling primary plane if overlay is full screen imx: - Format modifier support - Add tile prefetch to PRE - Runtime PM support for PRG ast: - fix LUT loading" * tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits) drm/ast: Load lut in crtc_commit drm: Check for lessee in DROP_MASTER ioctl drm: fix gpu scheduler link order drm/amd/display: Demote error print to debug print when ATOM impl missing dma-buf: fix reservation_object_wait_timeout_rcu once more v2 drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) drm/amd/amdgpu: Add Polaris version check drm/amdgpu: Reenable manual GPU reset from sysfs drm/amdgpu: disable MMHUB power gating on raven drm/ttm: Don't unreserve swapped BOs that were previously reserved drm/ttm: Don't add swapped BOs to swap-LRU list drm/amdgpu: only check for ECC on Vega10 drm/amd/powerplay: Fix smu_table_entry.handle type drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/radeon: fill in rb backend map on evergreen/ni. drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2) drm/ttm: only free pages rather than update global memory count together drm/amdgpu: fix CPU based VM updates drm/amdgpu: fix typo in amdgpu_vce_validate_bo ... 
Pull drm updates from Dave Airlie:
 "This seems to have been a comparatively quieter merge window, I assume
  due to holidays etc. The "biggest" change is AMD header cleanups, which
  merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
  with the etnaviv driver wanting to reuse the code, hopefully other drivers
  can go in the same direction.

  Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
  elsewhere.

  Core:
   - Add .last_close and .output_poll_changed helpers to reduce driver footprints
   - Fix plane clipping
   - Improved debug printing support
   - Add panel orientation property
   - Update edid derived properties at edid setting
   - Reduction in fbdev driver footprint
   - Move amdgpu scheduler into core for other drivers to use.

  i915:
   - Selftest and IGT improvements
   - Fast boot prep work on IPS, pipe config
   - HW workarounds for Cannonlake, Geminilake
   - Cannonlake clock and HDMI2.0 fixes
   - GPU cache invalidation and context switch improvements
   - Display planes cleanup
   - New PMU interface for perf queries
   - New firmware support for KBL/SKL
   - Geminilake HW workaround for perforamce
   - Coffeelake stolen memory improvements
   - GPU reset robustness work
   - Cannonlake horizontal plane flipping
   - GVT work

  amdgpu/radeon:
   - RV and Vega header file cleanups (lots of lines gone!)
   - TTM operation context support
   - 48-bit GPUVM support for Vega/RV
   - ECC support for Vega
   - Resizeable BAR support
   - Multi-display sync support
   - Enable swapout for reserved BOs during allocation
   - S3 fixes on Raven
   - GPU reset cleanup and fixes
   - 2+1 level GPU page table

  amdkfd:
   - GFX7/8 SDMA user queues support
   - Hardware scheduling for multiple processes
   - dGPU prep work

  rcar:
   - Added R8A7743/5 support
   - System suspend/resume support

  sun4i:
   - Multi-plane support for YUV formats
   - A83T and LVDS support

  msm:
   - Devfreq support for GPU

  tegra:
   - Prep work for adding Tegra186 support
   - Tegra186 HDMI support
   - HDMI2.0 and zpos support by using generic helpers

  tilcdc:
   - Misc fixes

  omapdrm:
   - Support memory bandwidth limits
   - DSI command mode panel cleanups
   - DMM error handling

  exynos:
   - drop the old IPP subdriver.

  etnaviv:
   - Occlusion query fixes
   - Job handling fixes
   - Prep work for hooking in gpu scheduler

  armada:
   - Move closer to atomic modesetting
   - Allow disabling primary plane if overlay is full screen

  imx:
   - Format modifier support
   - Add tile prefetch to PRE
   - Runtime PM support for PRG

  ast:
   - fix LUT loading"

* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
  drm/ast: Load lut in crtc_commit
  drm: Check for lessee in DROP_MASTER ioctl
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  dma-buf: fix reservation_object_wait_timeout_rcu once more v2
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  ...