linux-toradex.git/drivers/char, branch v4.9.91

ipmi/watchdog: fix wdog hang on panic waiting for ipmi response

2018-03-24T10:00:18+00:00

[ Upstream commit 2c1175c2e8e5487233cabde358a19577562ac83e ]

Commit c49c097610fe ("ipmi: Don't call receive handler in the
panic context") means that the panic_recv_free is not called during a
panic and the atomic count does not drop to 0.

Fix this by only expecting one decrement of the atomic variable
which comes from panic_smi_free.

Signed-off-by: Robert Lippert 
Signed-off-by: Corey Minyard 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tpm: fix potential buffer overruns caused by bit glitches on the bus

2018-03-24T10:00:08+00:00

commit 3be23274755ee85771270a23af7691dc9b3a95db upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().

Signed-off-by: Jeremy Boone 
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley 
Reviewed-by: Jarkko Sakkinen 
Tested-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

agp/intel: Flush all chipset writes after updating the GGTT

2018-03-22T08:17:57+00:00

[ Upstream commit 8516673a996870ea0ceb337ee4f83c33c5ec3111 ]

Before accessing the GGTT we must flush the PTE writes and make them
visible to the chipset, or else the indirect access may end up in the
wrong page. In commit 3497971a71d8 ("agp/intel: Flush chipset writes
after updating a single PTE"), we noticed corruption of the uploads for
pwrite and for capturing GPU error states, but it was presumed that the
explicit calls to intel_gtt_chipset_flush() were sufficient for the
execbuffer path. However, we have not been flushing the chipset between
the PTE writes and access via the GTT itself.

For simplicity, do the flush after any PTE update rather than try and
batch the flushes on a just-in-time basis.

References: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson 
Cc: Tvrtko Ursulin 
Cc: Mika Kuoppala 
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Joonas Lahtinen 
Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tpm-dev-common: Reject too short writes

2018-03-11T15:21:28+00:00

commit ee70bc1e7b63ac8023c9ff9475d8741e397316e7 upstream.

tpm_transmit() does not offer an explicit interface to indicate the number
of valid bytes in the communication buffer. Instead, it relies on the
commandSize field in the TPM header that is encoded within the buffer.
Therefore, ensure that a) enough data has been written to the buffer, so
that the commandSize field is present and b) the commandSize field does not
announce more data than has been written to the buffer.

This should have been fixed with CVE-2011-1161 long ago, but apparently
a correct version of that patch never made it into the kernel.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Steffen 
Reviewed-by: Jarkko Sakkinen 
Tested-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: Greg Kroah-Hartman

tpm_tis_spi: Use DMA-safe memory for SPI transfers

2018-03-11T15:21:27+00:00

commit 6b3a13173f23e798e1ba213dd4a2c065a3b8d751 upstream.

The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe.
This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes
and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe
buffer and copy the data to/from it.

The buffer needs to be allocated separately, to ensure that it is
cacheline-aligned and not shared with other data, so that DMA can work
correctly.

Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Alexander Steffen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: Greg Kroah-Hartman

tpm: constify transmit data pointers

2018-03-11T15:21:27+00:00

commit c37fbc09bd4977736f6bc4050c6f099c587052a7 upstream.

Making cmd_getticks 'const' introduced a couple of harmless warnings:

drivers/char/tpm/tpm_tis_core.c: In function 'probe_itpm':
drivers/char/tpm/tpm_tis_core.c:469:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
  rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:477:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
  rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:255:12: note: expected 'u8 * {aka unsigned char *}' but argument is of type 'const u8 * {aka const unsigned char *}'
 static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)

This changes the related functions to all take 'const' pointers
so that gcc can see this as being correct. I had to slightly
modify the logic around tpm_tis_spi_transfer() for this to work
without introducing ugly casts.

Cc: stable@vger.kernel.org
Fixes: 5e35bd8e06b9 ("tpm_tis: make array cmd_getticks static const to shink object code size")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Jarkko Sakkinen 
Tested-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: Greg Kroah-Hartman

tpm_tis: fix potential buffer overruns caused by bit glitches on the bus

2018-03-11T15:21:27+00:00

commit 6bb320ca4a4a7b5b3db8c8d7250cc40002046878 upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone 
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley 
Tested-by: Jarkko Sakkinen 
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus

2018-03-11T15:21:27+00:00

commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone 
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley 
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus

2018-03-11T15:21:27+00:00

commit 9b8cb28d7c62568a5916bdd7ea1c9176d7f8f2ed upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone 
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley 
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the bus

2018-03-11T15:21:27+00:00

commit 6d24cd186d9fead3722108dec1b1c993354645ff upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone 
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley 
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Jarkko Sakkinen 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman