<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/clk/Makefile, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>clk: zte: Add Clock registration infrastructure</title>
<updated>2026-10-26T23:45:49+00:00</updated>
<author>
<name>Stefan Dösinger</name>
<email>stefandoesinger@gmail.com</email>
</author>
<published>2026-09-27T20:13:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=8a9b53cc1370db72dd8eefc51bfe4f3dad45de19'/>
<id>8a9b53cc1370db72dd8eefc51bfe4f3dad45de19</id>
<content type='text'>
The next patches will implement the regmap clocks and PLL driver. The
actual hardware specific clock listing will live in a separate module.

Signed-off-by: Stefan Dösinger &lt;stefandoesinger@gmail.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The next patches will implement the regmap clocks and PLL driver. The
actual hardware specific clock listing will live in a separate module.

Signed-off-by: Stefan Dösinger &lt;stefandoesinger@gmail.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: anlogic: add cru support for Anlogic DR1V90 SoC</title>
<updated>2026-09-29T18:12:34+00:00</updated>
<author>
<name>Junhui Liu</name>
<email>junhui.liu@pigmoral.tech</email>
</author>
<published>2026-05-14T09:27:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c4e2f5e69ba4298c10ab5a64525379ca48ca921e'/>
<id>c4e2f5e69ba4298c10ab5a64525379ca48ca921e</id>
<content type='text'>
The Clock and Reset Unit (CRU) in the Anlogic DR1V90 SoC provides
management for the clock and reset.

The clock driver includes support for:
- Generic clocks: fixed-factor, divider, mux and gate.
- PLL: "nm" type (parent * n / m) and "c" type (parent / c). These PLLs
  are set up by the FSBL and mared as "don't touch" in the datasheet, so
  only the recal_rate() op is provided.
- Divider with gate: support both division and gating (by setting value
  to 0); some of them require a minimum divider value to avoid timing
  issues.

This also prepares the structure for the reset controller support,
registering an auxiliary device for resets.

Signed-off-by: Junhui Liu &lt;junhui.liu@pigmoral.tech&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The Clock and Reset Unit (CRU) in the Anlogic DR1V90 SoC provides
management for the clock and reset.

The clock driver includes support for:
- Generic clocks: fixed-factor, divider, mux and gate.
- PLL: "nm" type (parent * n / m) and "c" type (parent / c). These PLLs
  are set up by the FSBL and mared as "don't touch" in the datasheet, so
  only the recal_rate() op is provided.
- Divider with gate: support both division and gating (by setting value
  to 0); some of them require a minimum divider value to avoid timing
  issues.

This also prepares the structure for the reset controller support,
registering an auxiliary device for resets.

Signed-off-by: Junhui Liu &lt;junhui.liu@pigmoral.tech&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: mmp: allow COMPILE_TEST builds</title>
<updated>2026-09-29T17:05:17+00:00</updated>
<author>
<name>Rosen Penev</name>
<email>rosenp@gmail.com</email>
</author>
<published>2026-07-19T21:43:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d0b72c88671b3c46342bbebc9b90280890436c98'/>
<id>d0b72c88671b3c46342bbebc9b90280890436c98</id>
<content type='text'>
The MMP clock directory is only entered for ARCH_MMP, even though the
PXA1908 and MMP2 audio clock symbols can already be selected for
COMPILE_TEST.

Add a hidden MMP clock family gate, select it from the compile-testable MMP
clock symbols, and use that symbol for the parent Makefile descent.  Keep
ARCH_MMP as the default provider for existing platform builds.

Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/mmp/

Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev &lt;rosenp@gmail.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The MMP clock directory is only entered for ARCH_MMP, even though the
PXA1908 and MMP2 audio clock symbols can already be selected for
COMPILE_TEST.

Add a hidden MMP clock family gate, select it from the compile-testable MMP
clock symbols, and use that symbol for the parent Makefile descent.  Keep
ARCH_MMP as the default provider for existing platform builds.

Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/mmp/

Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev &lt;rosenp@gmail.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: nuvoton: build with any architecture</title>
<updated>2026-09-11T23:55:34+00:00</updated>
<author>
<name>Rosen Penev</name>
<email>rosenp@gmail.com</email>
</author>
<published>2026-09-04T21:46:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=061aca8aa0be5de74a4b267588bbcfb8beca0ecb'/>
<id>061aca8aa0be5de74a4b267588bbcfb8beca0ecb</id>
<content type='text'>
The directory's Kconfig already has COMPILE_TEST. This allows it to
work.

Signed-off-by: Rosen Penev &lt;rosenp@gmail.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The directory's Kconfig already has COMPILE_TEST. This allows it to
work.

Signed-off-by: Rosen Penev &lt;rosenp@gmail.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: tests: Add clk_parse_clkspec() Kunit testing</title>
<updated>2026-09-03T18:03:08+00:00</updated>
<author>
<name>Miquel Raynal (Schneider Electric)</name>
<email>miquel.raynal@bootlin.com</email>
</author>
<published>2026-08-07T15:24:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d0a15b827251de65bd39ce0555d656d5563c41dc'/>
<id>d0a15b827251de65bd39ce0555d656d5563c41dc</id>
<content type='text'>
Create a new set of kunit tests to make sure clk_parse_clkspec() is
working as expected. We currently verify if we get a proper device when
using indexes and names. If we make an out of bounds request we expect
an error.

For testing purposes, we must ensure of_clk_get_hw()'s symbol is
exported.

Suggested-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
Signed-off-by: Miquel Raynal (Schneider Electric) &lt;miquel.raynal@bootlin.com&gt;
Reviewed-by: Brian Masney &lt;bmasney@redhat.com&gt;
Reviewed-by: Frank Li &lt;Frank.Li@nxp.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Create a new set of kunit tests to make sure clk_parse_clkspec() is
working as expected. We currently verify if we get a proper device when
using indexes and names. If we make an out of bounds request we expect
an error.

For testing purposes, we must ensure of_clk_get_hw()'s symbol is
exported.

Suggested-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
Signed-off-by: Miquel Raynal (Schneider Electric) &lt;miquel.raynal@bootlin.com&gt;
Reviewed-by: Brian Masney &lt;bmasney@redhat.com&gt;
Reviewed-by: Frank Li &lt;Frank.Li@nxp.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: davinci: add COMPILE_TEST support</title>
<updated>2026-09-02T23:00:31+00:00</updated>
<author>
<name>Rosen Penev</name>
<email>rosenp@gmail.com</email>
</author>
<published>2026-09-02T22:20:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=551ba775497e93d93bb849f6ee572ca768cbaa3e'/>
<id>551ba775497e93d93bb849f6ee572ca768cbaa3e</id>
<content type='text'>
Add a driver-scoped Kconfig symbol for the DaVinci clock drivers so
they can be built through COMPILE_TEST without selecting the ARM
DaVinci platform symbols.

Keep the existing ARM platform behavior by defaulting the new symbol
from ARCH_DAVINCI, and use it for the davinci clock Makefile entries.
ARCH_DAVINCI_DA850 is the only remaining DaVinci platform symbol, so a
single COMMON_CLK_DAVINCI symbol suffices; the whole directory builds
together just fine.

Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev &lt;rosenp@gmail.com&gt;
Reviewed-by: Brian Masney &lt;bmasney@redhat.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a driver-scoped Kconfig symbol for the DaVinci clock drivers so
they can be built through COMPILE_TEST without selecting the ARM
DaVinci platform symbols.

Keep the existing ARM platform behavior by defaulting the new symbol
from ARCH_DAVINCI, and use it for the davinci clock Makefile entries.
ARCH_DAVINCI_DA850 is the only remaining DaVinci platform symbol, so a
single COMMON_CLK_DAVINCI symbol suffices; the whole directory builds
together just fine.

Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev &lt;rosenp@gmail.com&gt;
Reviewed-by: Brian Masney &lt;bmasney@redhat.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branches 'clk-pile' and 'clk-microchip' into clk-next</title>
<updated>2026-08-20T23:51:47+00:00</updated>
<author>
<name>Stephen Boyd</name>
<email>sboyd@kernel.org</email>
</author>
<published>2026-08-20T23:51:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=dd8eb789f18c4c600f28e61176a02bcf3b790117'/>
<id>dd8eb789f18c4c600f28e61176a02bcf3b790117</id>
<content type='text'>
* clk-pile: (111 commits)
  clk: microchip: mpfs: fix regmap_update_bits() mask/val order
  clk: visconti: Make sure clk_init_data is fully initialized
  clk: ti: Make sure clk_init_data is fully initialized
  MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
  Drop Michael Turquette's clk maintainer entry
  clk: ti: composite: resolve parent clocks by DT index, not by name
  clk: ti: mux: resolve parent clocks by DT index, not by name
  clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
  dt-bindings: clock: ti,keystone-gate: Convert to DT schema
  dt-bindings: clock: ti: Convert APLL clock to DT schema
  clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
  dt-bindings: clock: ti,clockdomain: Convert to DT schema
  dt-bindings: clock: Correct white-space style
  clk: tegra: set up proper EMC clock implementation for Tegra114
  clk: clocking-wizard: remove 20kHz restriction
  clk: clocking-wizard: optimize clock search
  clk: clocking-wizard: fix clock difference detection
  clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
  clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
  clk: tegra: support 48MHz clock for pll_p_out1
  ...

* clk-microchip:
  clk: at91: Read "reg" with helper
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* clk-pile: (111 commits)
  clk: microchip: mpfs: fix regmap_update_bits() mask/val order
  clk: visconti: Make sure clk_init_data is fully initialized
  clk: ti: Make sure clk_init_data is fully initialized
  MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
  Drop Michael Turquette's clk maintainer entry
  clk: ti: composite: resolve parent clocks by DT index, not by name
  clk: ti: mux: resolve parent clocks by DT index, not by name
  clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
  dt-bindings: clock: ti,keystone-gate: Convert to DT schema
  dt-bindings: clock: ti: Convert APLL clock to DT schema
  clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
  dt-bindings: clock: ti,clockdomain: Convert to DT schema
  dt-bindings: clock: Correct white-space style
  clk: tegra: set up proper EMC clock implementation for Tegra114
  clk: clocking-wizard: remove 20kHz restriction
  clk: clocking-wizard: optimize clock search
  clk: clocking-wizard: fix clock difference detection
  clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
  clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
  clk: tegra: support 48MHz clock for pll_p_out1
  ...

* clk-microchip:
  clk: at91: Read "reg" with helper
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile</title>
<updated>2026-08-17T16:28:08+00:00</updated>
<author>
<name>Stephen Boyd</name>
<email>sboyd@kernel.org</email>
</author>
<published>2026-08-14T00:42:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=df822f2e36cf2c2864d166d90cf002df4d8689e5'/>
<id>df822f2e36cf2c2864d166d90cf002df4d8689e5</id>
<content type='text'>
Pull clk patches from Brian Masney:

 - New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
   UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
   bindings. Si549 support was added to the existing si544 driver.
 - New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
   EN7523 PCIe PERSTOUT reset lines.
 - The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
   the existing optional variant, and exports
   devm_clk_hw_register_composite_pdata() for modular drivers.
 - Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
   support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
   charge pump/lock parameter programming during dynamic reconfiguration.
 - Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
   the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
   gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
   registration failure, a prepare reference leak in the palmas driver,
   unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
   pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
   clocking-wizard clock difference detection bug.
 - Various cleanups across tegra, st, and mvebu providers to stop misusing the
   consumer clock API, along with other minor fixes and improvements.

Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;

* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
  clk: tegra: set up proper EMC clock implementation for Tegra114
  clk: clocking-wizard: remove 20kHz restriction
  clk: clocking-wizard: optimize clock search
  clk: clocking-wizard: fix clock difference detection
  clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
  clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
  clk: tegra: support 48MHz clock for pll_p_out1
  clk: aspeed: add AST2700 PECI clock
  dt-bindings: clock: ast2700: add PECI clock
  clk: mediatek: Add mt8173-mfgtop driver
  dt-bindings: clock: mediatek: Add mt8173 mfgtop
  clk: tegra: clean-up simple provider misuse of the consumer API
  clk: st: clean-up simple provider misuse of the consumer API
  clk: mvebu: clean-up simple provider misuse of the consumer API
  clk: remove conditional return with no effect
  clk: Add devm_clk_bulk_get_enable()
  clk: en7523: add support for dedicated PCIe PERSTOUT reset
  dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
  arm64: dts: cix: sky1: add audss cru
  reset: cix: add sky1 audss auxiliary reset driver
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull clk patches from Brian Masney:

 - New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
   UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
   bindings. Si549 support was added to the existing si544 driver.
 - New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
   EN7523 PCIe PERSTOUT reset lines.
 - The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
   the existing optional variant, and exports
   devm_clk_hw_register_composite_pdata() for modular drivers.
 - Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
   support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
   charge pump/lock parameter programming during dynamic reconfiguration.
 - Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
   the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
   gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
   registration failure, a prepare reference leak in the palmas driver,
   unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
   pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
   clocking-wizard clock difference detection bug.
 - Various cleanups across tegra, st, and mvebu providers to stop misusing the
   consumer clock API, along with other minor fixes and improvements.

Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;

* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
  clk: tegra: set up proper EMC clock implementation for Tegra114
  clk: clocking-wizard: remove 20kHz restriction
  clk: clocking-wizard: optimize clock search
  clk: clocking-wizard: fix clock difference detection
  clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
  clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
  clk: tegra: support 48MHz clock for pll_p_out1
  clk: aspeed: add AST2700 PECI clock
  dt-bindings: clock: ast2700: add PECI clock
  clk: mediatek: Add mt8173-mfgtop driver
  dt-bindings: clock: mediatek: Add mt8173 mfgtop
  clk: tegra: clean-up simple provider misuse of the consumer API
  clk: st: clean-up simple provider misuse of the consumer API
  clk: mvebu: clean-up simple provider misuse of the consumer API
  clk: remove conditional return with no effect
  clk: Add devm_clk_bulk_get_enable()
  clk: en7523: add support for dedicated PCIe PERSTOUT reset
  dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
  arm64: dts: cix: sky1: add audss cru
  reset: cix: add sky1 audss auxiliary reset driver
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile</title>
<updated>2026-08-17T16:27:10+00:00</updated>
<author>
<name>Stephen Boyd</name>
<email>sboyd@kernel.org</email>
</author>
<published>2026-08-14T00:17:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=804b10deb0e8872716416b38af0e4e60a038f0fd'/>
<id>804b10deb0e8872716416b38af0e4e60a038f0fd</id>
<content type='text'>
Pull clk patches picked up by Brian Masney:

Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.

- Add spread spectrum clock (SSC) support to the clk framework, including a new
  assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
  API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
  common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
  reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
  and convert existing open-coded implementations across hisilicon, imx, qcom,
  renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
  drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
  and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
  rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
  return values, incorrect PLL_CTL1_FRAC bit field width, and broken
  determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
  Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
  Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
  William Theesfeld, Xuyang Dong, and Yu-Chun Lin

Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]

* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
  pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
  pmdomain: mediatek: airoha: use clk_determine_rate_noop()
  phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
  clk: sprd: use clk_determine_rate_noop()
  clk: scpi: use clk_determine_rate_noop()
  clk: samsung: acpm: use clk_determine_rate_noop()
  clk: rp1: use clk_determine_rate_noop()
  clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
  clk: qcom: smd-rpm: use clk_determine_rate_noop()
  clk: qcom: rpmh: use clk_determine_rate_noop()
  clk: qcom: rpm: use clk_determine_rate_noop()
  clk: imx: scu: use clk_determine_rate_noop()
  clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
  clk: add clk_determine_rate_noop()
  clk: imx: scu: drop redundant init.ops variable assignment
  clk: test: convert constants to use HZ_PER_MHZ
  docs: clk: include some identifiers to keep documentation up to date
  clk: add kernel docs for struct clk_core
  clk: add kernel docs for the core flags
  clk: hisilicon: allow COMPILE_TEST builds
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull clk patches picked up by Brian Masney:

Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.

- Add spread spectrum clock (SSC) support to the clk framework, including a new
  assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
  API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
  common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
  reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
  and convert existing open-coded implementations across hisilicon, imx, qcom,
  renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
  drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
  and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
  rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
  return values, incorrect PLL_CTL1_FRAC bit field width, and broken
  determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
  Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
  Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
  William Theesfeld, Xuyang Dong, and Yu-Chun Lin

Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]

* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
  pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
  pmdomain: mediatek: airoha: use clk_determine_rate_noop()
  phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
  clk: sprd: use clk_determine_rate_noop()
  clk: scpi: use clk_determine_rate_noop()
  clk: samsung: acpm: use clk_determine_rate_noop()
  clk: rp1: use clk_determine_rate_noop()
  clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
  clk: qcom: smd-rpm: use clk_determine_rate_noop()
  clk: qcom: rpmh: use clk_determine_rate_noop()
  clk: qcom: rpm: use clk_determine_rate_noop()
  clk: imx: scu: use clk_determine_rate_noop()
  clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
  clk: add clk_determine_rate_noop()
  clk: imx: scu: drop redundant init.ops variable assignment
  clk: test: convert constants to use HZ_PER_MHZ
  docs: clk: include some identifiers to keep documentation up to date
  clk: add kernel docs for struct clk_core
  clk: add kernel docs for the core flags
  clk: hisilicon: allow COMPILE_TEST builds
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: cix: add sky1 audss clock controller</title>
<updated>2026-07-28T15:25:29+00:00</updated>
<author>
<name>Joakim Zhang</name>
<email>joakim.zhang@cixtech.com</email>
</author>
<published>2026-07-23T09:08:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=3730fe6032d9a5e1140994693feefe0efa927acb'/>
<id>3730fe6032d9a5e1140994693feefe0efa927acb</id>
<content type='text'>
Add a platform driver for the Cix Sky1 AUDSS CRU. The driver maps
the CRU registers and registers mux, divider and gate clocks for
DSP, SRAM, HDA, DMAC, I2S, mailbox, watchdog and timer blocks.

Four SoC-level audio reference clocks are enabled as inputs to the
internal clock tree. The driver releases the AUDSS NOC reset, enables
runtime PM and instantiates the auxiliary reset device.

Signed-off-by: Joakim Zhang &lt;joakim.zhang@cixtech.com&gt;
Reviewed-by: Brian Masney &lt;bmasney@redhat.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a platform driver for the Cix Sky1 AUDSS CRU. The driver maps
the CRU registers and registers mux, divider and gate clocks for
DSP, SRAM, HDA, DMAC, I2S, mailbox, watchdog and timer blocks.

Four SoC-level audio reference clocks are enabled as inputs to the
internal clock tree. The driver releases the AUDSS NOC reset, enables
runtime PM and instantiates the auxiliary reset device.

Signed-off-by: Joakim Zhang &lt;joakim.zhang@cixtech.com&gt;
Reviewed-by: Brian Masney &lt;bmasney@redhat.com&gt;
Signed-off-by: Brian Masney &lt;bmasney@redhat.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
