linux-toradex.git/drivers/clk/hisilicon, branch v4.4.61

clk: Remove unneeded semicolons

2015-09-17T18:15:14+00:00

There are cleary typo errors so can be removed.

Signed-off-by: Javier Martinez Canillas 
Acked-by: Leo Yan 
Signed-off-by: Stephen Boyd

clk: Hi6220: separately build stub clock driver

2015-09-03T17:44:55+00:00

The previous code, kernel builds Hi6220's common clock driver and stub
clock driver together. Stub clock driver has introduced the dependency
with CONFIG_MAILBOX, so kernel will not build Hi6220's common clock
driver due ARM64's defconfig have not enabled CONFIG_MAILBOX by default.

So separately build stub clock driver and common clock driver for
Hi6220; and only let stub clock driver has the dependency with
CONFIG_MAILBOX.

Signed-off-by: Leo Yan 
Tested-by: Kevin Hilman 
Signed-off-by: Stephen Boyd

clk: Hi6220: add stub clock driver

2015-08-24T23:49:10+00:00

On Hi6220, there have some clocks which can use mailbox channel to send
messages to power controller to change frequency; this includes CPU, GPU
and DDR clocks.

For dynamic frequency scaling, firstly need write the frequency value to
SRAM region, and then send message to mailbox to trigger power controller
to handle this requirement. This driver will use syscon APIs to pass SRAM
memory region and use common mailbox APIs for channels accessing.

This init driver will support cpu frequency change firstly.

Signed-off-by: Leo Yan 
Signed-off-by: Stephen Boyd

clk: hisi: refine parameter checking for init

2015-08-03T21:44:53+00:00

*of_iomap()* will check the device node pointer, and if the pointer is
NULL it will return error code. So refine clock's init flow by checking
the device node with this simple way; and polish a little for the print
out message.

Signed-off-by: Leo Yan 
Signed-off-by: Stephen Boyd

Merge branch 'cleanup-clk-h-includes' into clk-next

2015-07-28T18:59:09+00:00

* cleanup-clk-h-includes: (62 commits)
  clk: Remove clk.h from clk-provider.h
  clk: h8300: Remove clk.h and clkdev.h includes
  clk: at91: Include clk.h and slab.h
  clk: ti: Switch clk-provider.h include to clk.h
  clk: pistachio: Include clk.h
  clk: ingenic: Include clk.h
  clk: si570: Include clk.h
  clk: moxart: Include clk.h
  clk: cdce925: Include clk.h
  clk: Include clk.h in clk.c
  clk: zynq: Include clk.h
  clk: ti: Include clk.h
  clk: sunxi: Include clk.h and remove unused clkdev.h includes
  clk: st: Include clk.h
  clk: qcom: Include clk.h
  clk: highbank: Include clk.h
  clk: bcm: Include clk.h
  clk: versatile: Remove clk.h and clkdev.h includes
  clk: ux500: Remove clk.h and clkdev.h includes
  clk: tegra: Properly include clk.h
  ...

clk: fix some determine_rate implementations

2015-07-28T01:13:32+00:00

Some determine_rate implementations are not returning an error
when they failed to adapt the rate according to the rate request.
Fix them so that they return an error instead of silently
returning 0.

Signed-off-by: Boris Brezillon 
CC: Jonathan Corbet 
CC: Tony Lindgren 
CC: Ralf Baechle 
CC: "Emilio López" 
CC: Maxime Ripard 
Cc: Tero Kristo 
CC: Peter De Schrijver 
CC: Prashant Gaikwad 
CC: Stephen Warren 
CC: Thierry Reding 
CC: Alexandre Courbot 
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
Signed-off-by: Stephen Boyd

clk: change clk_ops' ->determine_rate() prototype

2015-07-28T01:12:01+00:00

Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.

Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.

The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).

Signed-off-by: Boris Brezillon 
CC: Jonathan Corbet 
CC: Tony Lindgren 
CC: Ralf Baechle 
CC: "Emilio López" 
CC: Maxime Ripard 
Acked-by: Tero Kristo 
CC: Peter De Schrijver 
CC: Prashant Gaikwad 
CC: Stephen Warren 
CC: Thierry Reding 
CC: Alexandre Courbot 
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd 
Tested-by: Romain Perier 
Signed-off-by: Heiko Stuebner 
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd

clk: hisilicon: Remove clk.h include

2015-07-20T17:53:06+00:00

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also drop the clkdev.h include in files that
aren't using it.

Cc: Bintian Wang 
Cc: Zhangfei Gao 
Cc: Haojian Zhuang 
Signed-off-by: Stephen Boyd

clk: make several parent names const

2015-06-04T21:27:06+00:00

Since commit 2893c379461a ("clk: make strings in parent name arrays
const") the name of parent clocks can be const. So add more const in
several clock drivers.

Signed-off-by: Uwe Kleine-König 
Acked-by: Heiko Stuebner 
Acked-by: Sylwester Nawrocki 
Signed-off-by: Stephen Boyd

Merge branch 'clk-next-hi6220' into clk-next

2015-06-03T22:22:03+00:00

Conflicts:
	drivers/clk/Kconfig