linux-toradex.git/drivers/clk/meson, branch v4.10 Linux kernel for Apalis and Colibri modules Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-10-08T04:34:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-08T04:34:49+00:00 c913fc4146ba7c280e074558d0a461e5c6f07c8a Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ... 
Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...
clk: gxbb: expose i2c clocks 2016-09-14T18:24:04+00:00 Jerome Brunet jbrunet@baylibre.com 2016-09-14T10:06:05+00:00 dfdd7d4af6ebee027be7bf2636b2314937948da6 I2C and AO_I2C clocks are needed for the i2c driver, expose to DT (and comment out in clk driver) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> 
I2C and AO_I2C clocks are needed for the i2c driver, expose to DT
(and comment out in clk driver)

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
clk: gxbb: expose USB clocks 2016-09-14T18:23:55+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2016-09-04T21:31:46+00:00 5dbe7890e6e998b49aac3f0a6455803c956a49c9 USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs. Expose these clocks to DT and comment out in clk driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> 
USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related
dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs.
Expose these clocks to DT and comment out in clk driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
clk: gxbb: expose spifc clock 2016-09-14T18:22:49+00:00 Jerome Brunet jbrunet@baylibre.com 2016-09-07T15:13:39+00:00 f2120a8b090676380d9bce4ea23f855dc8e0d71f SPI clock is needed for the spifc driver, expose to DT (and comment out in the clk driver) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> 
SPI clock is needed for the spifc driver, expose to DT
(and comment out in the clk driver)

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
clk: gxbb: expose MPLL2 clock for use by DT 2016-09-14T18:22:49+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2016-09-06T21:38:44+00:00 ed6f4b518004845f6f830422cc9e3ab4f0284930 This exposes the MPLL2 clock as this is one of the input clocks of the ethernet controller's internal mux. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> 
This exposes the MPLL2 clock as this is one of the input clocks of the
ethernet controller's internal mux.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
clk: meson: fix CLKID_GCLK_VENCI_INT typo 2016-09-14T18:17:15+00:00 Arnd Bergmann arnd@arndb.de 2016-09-06T13:01:10+00:00 0d5aa65e329e7f0b753686e116c99e2d7263bced The addition of many gate clocks added two entries in an array for the same value: drivers/clk/meson/meson8b.c:479:10: error: initialized field overwritten [-Werror=override-init] [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_venci_int.hw, [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_vencp_int.hw, This was clearly an accident, and since all other identifiers are listed in the order in which they are defined, I'm changing the first one to CLKID_GCLK_VENCI_INT0, making it all consistent again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e31a1900c1ff ("meson: clk: Add support for clock gates") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 
The addition of many gate clocks added two entries in an array for
the same value:

drivers/clk/meson/meson8b.c:479:10: error: initialized field overwritten [-Werror=override-init]
   [CLKID_GCLK_VENCI_INT]     = &meson8b_gclk_venci_int.hw,
   [CLKID_GCLK_VENCI_INT]     = &meson8b_gclk_vencp_int.hw,

This was clearly an accident, and since all other identifiers are
listed in the order in which they are defined, I'm changing the
first one to CLKID_GCLK_VENCI_INT0, making it all consistent again.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: e31a1900c1ff ("meson: clk: Add support for clock gates")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
meson: clk: Use builtin_platform_driver to simplify the code 2016-09-14T18:14:20+00:00 Wei Yongjun weiyongjun1@huawei.com 2016-09-10T12:02:49+00:00 8edeae56a1da30f0d33848fdd3bd8dafbcc2ad87 Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 
Use the builtin_platform_driver() macro to make the code simpler.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Merge branch 'clk-meson-gxbb' into clk-next 2016-09-03T01:13:40+00:00 Michael Turquette mturquette@baylibre.com 2016-09-03T01:13:40+00:00 e918a18d2eb36abb05614ccc866c82f6c3bfd666 






clk: meson-gxbb: Export PWM related clocks for DT
2016-09-02T23:33:30+00:00

Neil Armstrong
narmstrong@baylibre.com

2016-08-22T12:49:37+00:00

19a2a85d7157373b3540e9a0baff97d7cdca0dd5

Add the PWM related clocks in order to be referenced as PWM source
clocks.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1471870177-10609-1-git-send-email-narmstrong@baylibre.com





Add the PWM related clocks in order to be referenced as PWM source
clocks.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1471870177-10609-1-git-send-email-narmstrong@baylibre.com







meson: clk: Add support for clock gates
2016-09-02T00:43:12+00:00

Alexander Müller
serveralex@gmail.com

2016-08-27T17:40:54+00:00

e31a1900c1ff73d669408fc3243afb5c55863139

This patch adds support for the meson8b clock gates. Most of
them are disabled by Amlogic U-Boot, but need to be enabled
for ethernet, USB and many other components.

Signed-off-by: Alexander Müller <serveralex@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-7-git-send-email-serveralex@gmail.com





This patch adds support for the meson8b clock gates. Most of
them are disabled by Amlogic U-Boot, but need to be enabled
for ethernet, USB and many other components.

Signed-off-by: Alexander Müller <serveralex@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-7-git-send-email-serveralex@gmail.com