linux-toradex.git/drivers/clk/pxa, branch v4.4.73

Merge tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2015-09-01T00:26:48+00:00

Pull clk updates from Michael Turquette:
 "The clk framework changes for 4.3 are mostly updates to existing
  drivers and the addition of new clock drivers.  Stephen Boyd has also
  done a lot of subsystem-wide driver clean-ups (thanks!).  There are
  also fixes to the framework core and changes to better split clock
  provider drivers from clock consumer drivers"

* tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
  clk: s5pv210: add missing call to samsung_clk_of_add_provider()
  clk: pistachio: correct critical clock list
  clk: pistachio: Fix PLL rate calculation in integer mode
  clk: pistachio: Fix override of clk-pll settings from boot loader
  clk: pistachio: Fix 32bit integer overflows
  clk: tegra: Fix some static checker problems
  clk: qcom: Fix MSM8916 prng clock enable bit
  clk: Add missing header for 'bool' definition to clk-conf.h
  drivers/clk: appropriate __init annotation for const data
  clk: rockchip: register pll mux before pll itself
  clk: add bindings for the Ux500 clocks
  clk/ARM: move Ux500 PRCC bases to the device tree
  clk: remove duplicated code with __clk_set_parent_after
  clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)
  clk: Constify clk_hw argument to provider APIs
  clk: Hi6220: add stub clock driver
  dt-bindings: clk: Hi6220: Document stub clock driver
  dt-bindings: arm: Hi6220: add doc for SRAM controller
  clk: atlas7: fix pll missed divide NR in fraction mode
  clk: atlas7: fix bit field and its root clk for coresight_tpiu
  ...

clk: pxa: pxa3xx: fix CKEN register access

2015-08-07T23:53:13+00:00

Clocks 0 to 31 are on CKENA, and not CKENB. The clock register names
were inadequately inverted. As a consequence, all clock operations were
happening on CKENB, because almost all but 2 clocks are on CKENA.

As the clocks were activated by the bootloader in the former tests, it
escaped the testing that the wrong clock gate was manipulated. The error
was revealed by changing the pxa3xx-nand driver to a module, where upon
unloading, the wrong clock was disabled in CKENB.

Fixes: 9bbb8a338fb2 ("clk: pxa: add pxa3xx clock driver")
Signed-off-by: Robert Jarzmik 
Signed-off-by: Stephen Boyd

clk: pxa: fix core frequency reporting unit

2015-07-28T18:59:14+00:00

Legacy drivers which are not yet ported, such as cpufreq-pxa[23]xx, rely
on pxaXXx_get_clk_frequency_khz() to find the CPU core frequency.

This reporting was broken because the expected unit is kHz and not
Hz. Fix the reporting for pxa25x, pxa27x and pxa3xx.

Fixes: fe7710fae477 ("clk: add pxa25x clock drivers")
Fixes: d40670dc6169 ("clk: add pxa27x clock drivers")
Fixes: 9bbb8a338fb2 ("clk: pxa: add pxa3xx clock driver")
Signed-off-by: Robert Jarzmik 
Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2015-07-02T02:22:00+00:00

Pull clock framework updates from Michael Turquette:
 "The changes to the common clock framework for 4.2 are dominated by new
  drivers and updates to existing ones, as usual.

  There are some fixes to the framework itself and several cleanups for
  sparse warnings, etc"

* tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
  clk: stm32: Add clock driver for STM32F4[23]xxx devices
  dt-bindings: Document the STM32F4 clock bindings
  cpufreq: exynos: remove Exynos4210 specific cpufreq driver support
  ARM: Exynos: switch to using generic cpufreq driver for Exynos4210
  clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock
  clk: samsung: add infrastructure to register cpu clocks
  clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support
  doc: dt: add documentation for lpc1850-ccu clk driver
  clk: add lpc18xx ccu clk driver
  doc: dt: add documentation for lpc1850-cgu clk driver
  clk: add lpc18xx cgu clk driver
  clk: keystone: add support for post divider register for main pll
  clk: mvebu: flag the crypto clk as CLK_IGNORE_UNUSED
  clk: cygnus: remove Cygnus dummy clock binding
  clk: cygnus: add clock support for Broadcom Cygnus
  clk: Change bcm clocks build dependency
  clk: iproc: add initial common clock support
  clk: iproc: define Broadcom iProc clock binding
  MAINTAINERS: update email for Michael Turquette
  clk: meson: add some error handling in meson_clk_register_cpu()
  ...

clk: pxa: Fix const discarding warning

2015-06-12T21:30:12+00:00

A recent change to mark parent names as const missed this struct
member so we get warnings like:

drivers/clk/pxa/clk-pxa25x.c:122:2: warning: initialization
discards 'const' qualifier from pointer target type

Fix it.

Reported-by: kbuild test robot 
Acked-by: Uwe Kleine-König 
Signed-off-by: Stephen Boyd

clk: make several parent names const

2015-06-04T21:27:06+00:00

Since commit 2893c379461a ("clk: make strings in parent name arrays
const") the name of parent clocks can be const. So add more const in
several clock drivers.

Signed-off-by: Uwe Kleine-König 
Acked-by: Heiko Stuebner 
Acked-by: Sylwester Nawrocki 
Signed-off-by: Stephen Boyd

clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc

2015-05-12T21:26:39+00:00

Add 2 clocks which were erronously forgotten by the clock framework
port, namely :
 - sa1100-rtc
 - irda for pxa2xx-ir:UARTCLK

Signed-off-by: Robert Jarzmik 
Acked-by: Michael Turquette

ARM: pxa: change clocks init sequence

2015-05-12T21:26:25+00:00

Since pxa clocks were ported to the clock framework, an ordering issue
appears between clocks and clocksource initialization. As a consequence,
the pxa timer clock cannot be acquired in pxa_timer, and is disabled by
clock framework because it is "unused".

The ordering issue is that in the kernel boot sequence :
  start_kernel()
    ...
    time_init()
      -> pxa_timer()
        -> here the clocksource is initialized
    ...
    rest_init()
      kernel_init()
	initcalls
	  -> here the clocks are initialized

In the current sequence, the clocks are initialized way after pxa_timer,
which cannot acquire the OSTIMER0 clock.

To solve this issue, the clocks initialization is moved to pxa_timer(),
so that clocks are initialized before clocksource for non device-tree.
For device-tree, the standard arm time_init() will take care of the
ordering.

Reviewed-by: Michael Turquette 
Signed-off-by: Robert Jarzmik

clk: don't use __initconst for non-const arrays

2015-04-13T00:18:27+00:00

The statement

	static const char *name[];

defines a modifiable array of pointers to constant chars. That is

	*name[0] = 'f';

is forbidden, but

	name[0] = "f";

is not. So marking an array that is defined as above with __initconst is
wrong. Either an additional const must be added such that the whole
definition reads:

	static const char *const name[] __initconst;

or where this is not possible __initdata must be used.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Michael Turquette

clk: pxa: pxa3xx: add missing os timer clock

2015-04-10T20:35:56+00:00

The pxa3xx scheduler relies on the pxa-timer, which requires a clock for
its rate. As the clock handling will be taken over by the clock
framework, add this missing clock.

The miss was discovered by attempting to run a zylonite platform in a
device-tree configuration, with the future patch to shift clocks
handling to clock framework applied.

Signed-off-by: Robert Jarzmik 
Signed-off-by: Michael Turquette