linux-toradex.git/drivers/clk/qcom/Makefile, branch v4.4.28

clk: qcom: Add support for GDSCs

2015-09-16T22:22:35+00:00

GDSCs (Global Distributed Switch Controllers) are responsible for
safely collapsing and restoring power to peripherals in the SoC.
These are best modelled as power domains using genpd and given
the registers are scattered throughout the clock controller register
space, its best to have the support added through the clock driver.

Signed-off-by: Stephen Boyd 
Signed-off-by: Rajendra Nayak 
Signed-off-by: Stephen Boyd

clk: qcom: Add MSM8916 Global Clock Controller support

2015-03-23T23:09:22+00:00

This patch adds support for the global clock controller found on the MSM8916
based devices. It allows the various device drivers to probe and control
their clocks and resets.

Signed-off-by: Georgi Djakov 
[sboyd@codeaurora.org: Removed NULL entry from parent_maps]
Signed-off-by: Stephen Boyd

clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driver

2015-01-27T19:49:34+00:00

Add an LCC driver for MSM8960/APQ8064 that supports the i2s,
slimbus, and pcm clocks.

Signed-off-by: Stephen Boyd 
Tested-by: Kenneth Westfield 
Signed-off-by: Michael Turquette

clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver

2015-01-27T19:49:19+00:00

Add an LCC driver for IPQ806x that supports the i2s, S/PDIF, and
pcm clocks.

Signed-off-by: Rajendra Nayak 
Signed-off-by: Kumar Gala 
Signed-off-by: Josh Cartwright 
[sboyd@codeaurora.org: Reworded commit text, added Kconfig
select, fleshed out Kconfig description a bit more, added pll4
configuration and reworked probe for it, added muxes, split out
dt-binding file]
Signed-off-by: Stephen Boyd 
Tested-by: Kenneth Westfield 
Signed-off-by: Michael Turquette

clk: qcom: Add simple regmap based muxes

2015-01-27T19:49:09+00:00

Add support for muxes that use regmap instead of readl/writel
directly. We don't support as many features as clk-mux.c, but
this is good enough to support getting and setting parents.
Adding a table based lookup can be added in the future if needed.

Signed-off-by: Stephen Boyd 
Tested-by: Kenneth Westfield 
Signed-off-by: Michael Turquette

clk: qcom: Add support for regmap divider clocks

2015-01-27T19:49:00+00:00

Add support for dividers that use regmap instead of readl/writel.

Signed-off-by: Josh Cartwright 
Signed-off-by: Rajendra Nayak 
[sboyd@codeaurora.org: Switch to using generic divider code, drop
enable/disable, reword commit text]
Signed-off-by: Stephen Boyd 
Tested-by: Kenneth Westfield 
Signed-off-by: Michael Turquette

clk: qcom: Add support for IPQ8064's global clock controller (GCC)

2014-07-15T23:38:58+00:00

Add a driver for the global clock controller found on IPQ8064 based
platforms. This should allow most non-multimedia device drivers to probe
and control their clocks.

This is currently missing clocks for USB HSIC and networking devices.

Signed-off-by: Kumar Gala 
Signed-off-by: Andy Gross 
Signed-off-by: Stephen Boyd

clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support

2014-07-15T23:38:57+00:00

Add support for the multimedia clock controller found on the APQ8084
based platforms. This will allow the multimedia device drivers to
control their clocks.

Signed-off-by: Georgi Djakov 
[sboyd: Rework parent mapping to avoid conflicts]
Signed-off-by: Stephen Boyd

clk: qcom: Add APQ8084 Global Clock Controller support

2014-07-11T20:22:00+00:00

This patch adds support for the global clock controller found on
the APQ8084 based devices. This includes UART, I2C, SPI etc.

Signed-off-by: Georgi Djakov 
Signed-off-by: Stephen Boyd

clk: qcom: Consolidate common probe code

2014-04-30T18:51:51+00:00

Most of the probe code is the same between all the different
clock controllers. Consolidate the code into a common.c file.
This makes changes to the common probe parts easier and reduces
chances for bugs.

Signed-off-by: Stephen Boyd 
Signed-off-by: Mike Turquette