linux-toradex.git/drivers/clk/qcom, branch v5.9-rc5

clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk

2020-07-27T22:16:39+00:00

Add missing halt_check, hwcg_reg and hwcg_bit properties.
These were likely omitted when porting the driver upstream.

Signed-off-by: Konrad Dybcio 
Link: https://lore.kernel.org/r/20200726111215.22361-9-konradybcio@gmail.com
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Stephen Boyd

clk: qcom: gcc-sdm660: Add missing modem reset

2020-07-27T22:16:17+00:00

This will be required in order to support the
modem upstream.

Signed-off-by: Konrad Dybcio 
Link: https://lore.kernel.org/r/20200726111215.22361-2-konradybcio@gmail.com
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Stephen Boyd

clk: qcom: lpass: Add support for LPASS clock controller for SC7180

2020-07-24T20:09:43+00:00

The Low Power Audio subsystem clocks are required for Audio client
to be able to request for the clocks and power domains.

Signed-off-by: Taniya Das 
Link: https://lore.kernel.org/r/1595606878-2664-5-git-send-email-tdas@codeaurora.org
[sboyd@kernel.org: Drop unused ret in probe function]
Signed-off-by: Stephen Boyd

clk: qcom: gcc: Add support for GCC LPASS clock for SC7180

2020-07-24T20:08:06+00:00

Add the GCC lpass clock which is required to access the LPASS core
clocks.

Signed-off-by: Taniya Das 
Link: https://lore.kernel.org/r/1595606878-2664-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd

clk: qcom: gdsc: Add support to enable retention of GSDCR

2020-07-24T20:04:48+00:00

Add support for the RETAIN_FF_ENABLE feature which enables the
usage of retention registers. These registers maintain their
state after disabling and re-enabling a GDSC.

Signed-off-by: Taniya Das 
Link: https://lore.kernel.org/r/1595606878-2664-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd

clk: qcom: Export gdsc_gx_do_nothing_enable() to modules

2020-07-24T09:41:26+00:00

A clk driver can be a module but the gdsc code is in the common module.
Export this symbol so that allmodconfig builds keep working.

Cc: Jonathan Marek 
Fixes: 0638226dd095 ("clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers")
Signed-off-by: Stephen Boyd 
Link: https://lore.kernel.org/r/20200724094025.3261266-1-sboyd@kernel.org

clk: qcom: Add graphics clock controller driver for SM8250

2020-07-24T08:51:32+00:00

Add support for the graphics clock controller found on SM8250
based devices.

This is initially copied from the downstream kernel, but has
been modified to more closely match the upstream sc7180 driver.

Signed-off-by: Jonathan Marek 
Tested-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20200709135251.643-12-jonathan@marek.ca
Signed-off-by: Stephen Boyd

clk: qcom: Add graphics clock controller driver for SM8150

2020-07-24T08:51:29+00:00

Add support for the graphics clock controller found on SM8150
based devices.

This is initially copied from the downstream kernel, but has
been modified to more closely match the upstream sc7180 driver.

Signed-off-by: Jonathan Marek 
Tested-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20200709135251.643-11-jonathan@marek.ca
Signed-off-by: Stephen Boyd

clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers

2020-07-24T08:51:26+00:00

All gpucc drivers need this, so move it to common code instead of
duplicating it in every gpucc driver.

Signed-off-by: Jonathan Marek 
Tested-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20200709135251.643-10-jonathan@marek.ca
Signed-off-by: Stephen Boyd

clk: qcom: gcc: remove unnecessary vco_table from SM8150

2020-07-24T08:51:14+00:00

The fixed alpha pll ops only use it for clamping in round_rate, which is
unnecessary. This is consistent with SM8250 GCC not using vco_table.

Signed-off-by: Jonathan Marek 
Tested-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20200709135251.643-6-jonathan@marek.ca
Signed-off-by: Stephen Boyd