linux-toradex.git/drivers/clk/renesas, branch v7.0-rc7 Linux kernel for Apalis and Colibri modules Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T01:06:51+00:00 323bbfcf1ef8836d0d2ad9e2c1f1c684f0e3b5b3 This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.

As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
clk: renesas: Add missing log message terminators 2026-01-16T09:48:33+00:00 Geert Uytterhoeven geert+renesas@glider.be 2026-01-15T12:36:56+00:00 4fef3fd633be4a1a18c490a63f4131284f6ee0f4 Complete printed messages should be terminated by newline characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Brian Masney <bmasney@redhat.com> Link: https://patch.msgid.link/cd0b3624066b80ed0bb00d489c99e2c1a06d755f.1768480559.git.geert+renesas@glider.be 
Complete printed messages should be terminated by newline characters.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/cd0b3624066b80ed0bb00d489c99e2c1a06d755f.1768480559.git.geert+renesas@glider.be
clk: renesas: rzg2l: Remove DSI clock rate restrictions 2026-01-16T09:42:33+00:00 Chris Brandt chris.brandt@renesas.com 2025-11-24T13:10:02+00:00 5a4326f2e3b1edfb3329c1bee59035dc9f048b59 Convert the limited MIPI clock calculations to a full range of settings based on math including H/W limitation validation. Since the required DSI division setting must be specified from external sources before calculations, expose a new API to set it. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251124131003.992554-2-chris.brandt@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
Convert the limited MIPI clock calculations to a full range of settings
based on math including H/W limitation validation.
Since the required DSI division setting must be specified from external
sources before calculations, expose a new API to set it.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251124131003.992554-2-chris.brandt@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
clk: renesas: rzv2h: Deassert reset on assert timeout 2026-01-09T10:26:54+00:00 Biju Das biju.das.jz@bp.renesas.com 2026-01-08T12:34:28+00:00 879e9fc8f689cbd890f2f79b9da098697746316d If the assert() fails due to timeout error, set the reset register bit back to deasserted state. This change is needed especially for handling assert error in suspend() callback that expect the device to be in operational state in case of failure. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20260108123433.104464-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
If the assert() fails due to timeout error, set the reset register bit
back to deasserted state. This change is needed especially for handling
assert error in suspend() callback that expect the device to be in
operational state in case of failure.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108123433.104464-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
clk: renesas: rzg2l: Deassert reset on assert timeout 2026-01-09T10:26:54+00:00 Biju Das biju.das.jz@bp.renesas.com 2026-01-08T12:34:27+00:00 0b0201f259e1158a875c5fd01adf318ae5d32352 If the assert() fails due to timeout error, set the reset register bit back to deasserted state. This change is needed especially for handling assert error in suspend() callback that expect the device to be in operational state in case of failure. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20260108123433.104464-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
If the assert() fails due to timeout error, set the reset register bit
back to deasserted state. This change is needed especially for handling
assert error in suspend() callback that expect the device to be in
operational state in case of failure.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108123433.104464-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
clk: renesas: cpg-mssr: Unlock before reset verification 2026-01-09T10:26:23+00:00 Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com 2026-01-05T14:06:25+00:00 cda6a5def5917c6c23af1003d323ecdc5f2960a9 Move spin_unlock_irqrestore() before verifying the reset result and printing errors. The verification condition only uses local variables and does not require locking. Reported-by: Pavel Machek <pavel@nabladev.com> Closes: https://lore.kernel.org/all/aVujAQJSDn6WyORK@duo.ucw.cz/ Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20260105140625.2590685-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
Move spin_unlock_irqrestore() before verifying the reset result and
printing errors. The verification condition only uses local variables
and does not require locking.

Reported-by: Pavel Machek <pavel@nabladev.com>
Closes: https://lore.kernel.org/all/aVujAQJSDn6WyORK@duo.ucw.cz/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260105140625.2590685-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
clk: renesas: r9a09g056: Add entries for CANFD 2026-01-09T10:26:23+00:00 Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com 2025-12-24T16:50:49+00:00 c2922664613277c61922bbe577f25092a85fb27e Add clock and reset entries for the CANFD IP. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251224165049.3384870-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
Add clock and reset entries for the CANFD IP.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251224165049.3384870-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
clk: renesas: r9a09g057: Add entries for CANFD 2026-01-09T10:26:23+00:00 Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com 2025-12-24T16:50:48+00:00 26cc40e82230a776ead2ef6a6ed83bf80f94bb01 Add clock and reset entries for the CANFD IP. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251224165049.3384870-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
Add clock and reset entries for the CANFD IP.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251224165049.3384870-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>