This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
cmu_dpu is the clock management unit used for the Display Process Unit block. It generates clocks for image scaler, compressor etc. Add support for the muxes, dividers and gates in cmu_dpu. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Link: https://patch.msgid.link/20260113-dpu-clocks-v3-4-cb85424f2c72@linaro.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Currently, sysreg registers of a CMU that has PM and automatic clock
gating enabled are not saved / restored during runtime PM (RPM) or
s2idle. During normal suspend, they are accessed too late, after the
CMU (and potentially power domain) have been shut down, causing an
SError.
The reason is that these registers are registered to be saved/restored
via a syscore suspend handler which doesn't run during RPM or s2idle.
During normal suspend, this handler runs after the CMU has been shut
down. This registration happens as part of
samsung_clk_extended_sleep_init() via samsung_en_dyn_root_clk_gating().
When PM is enabled for a CMU, registers must be saved/restored via
exynos_arm64_cmu_suspend() / exynos_arm64_cmu_resume() respectively
instead. These use their own data structures and are unrelated to
anything that samsung_clk_extended_sleep_init() does. Calling it
unconditionally from samsung_en_dyn_root_clk_gating() therefore isn't
useful.
Update the code to prepare sysreg save / restore in a similar way to
how it handles other clock registers in the PM case already.
exynos_arm64_cmu_suspend() / exynos_arm64_cmu_resume() already handle
sysreg save/restore, just the setup was incorrect.
Fixes: 298fac4f4b96 ("clk: samsung: Implement automatic clock gating mode for CMUs")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260109-clk-samsung-autoclk-updates-v1-2-2394dcf242a9@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
We currently print a warning message that the IO memory size is not
compatible with automatic clock gating for many Exynos-based boards,
including legacy ones, even if not requested to enable automatic clock
gating in the first place.
Change the test in question to avoid that warning.
Fixes: 298fac4f4b96 ("clk: samsung: Implement automatic clock gating mode for CMUs")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/8b2c412d-3e1e-4be0-a9d5-ef67f6f0d409@samsung.com/
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260109-clk-samsung-autoclk-updates-v1-1-2394dcf242a9@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable auto clock mode, and define the additional fields which are used when this mode is enabled. /sys/kernel/debug/clk/clk_summary now reports approximately 308 running clocks and 298 disabled clocks. Prior to this commit 586 clocks were running and 17 disabled. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://patch.msgid.link/20251222-automatic-clocks-v7-4-fec86fa89874@linaro.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Update exynos_arm64_init_clocks() so that it enables the automatic clock mode bits in the CMU option register if the auto_clock_gate flag and option_offset fields are set for the CMU. To ensure compatibility with older DTs (that specified an incorrect CMU reg size), detect this and fallback to manual clock gate mode as the auto clock mode feature depends on registers in this area. The CMU option register bits are global and effect every clock component in the CMU, as such clearing the GATE_ENABLE_HWACG bit and setting GATE_MANUAL bit on every gate register is only required if auto_clock_gate is false. Additionally if auto_clock_gate is enabled the dynamic root clock gating and memclk registers will be configured in the corresponding CMUs sysreg bank. These registers are exposed via syscon, so the register samsung_clk_save/restore paths are updated to also take a regmap. As many gates for various Samsung SoCs are already exposed in the Samsung clock drivers a new samsung_auto_clk_gate_ops is implemented. This uses some CMU debug registers to report whether clocks are enabled or disabled when operating in automatic mode. This allows /sys/kernel/debug/clk/clk_summary to still dump the entire clock tree and correctly report the status of each clock in the system. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://patch.msgid.link/20251222-automatic-clocks-v7-3-fec86fa89874@linaro.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add support for CMU_MFD which provides clocks to MFD block, and register the required compatible and cmu_info for the same. Signed-off-by: Raghav Sharma <raghav.s@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://patch.msgid.link/20251119114744.1914416-3-raghav.s@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pull clk updates from Stephen Boyd: "This is entirely SoC clk drivers. The majority diff wise is for the new Rockchip and Qualcomm clk drivers which is mostly lines and lines of data structures to describe the clk hardware in these SoCs. Beyond those two, Renesas continues to incrementally add clks to their SoC drivers, causing them to show up higher in the diffstat this time because they added quite a few clks all over the place. Overall it is a semi-quiet release that has some new clk drivers and the usual fixes for clock data that was wrong or missing and non-critical cleanups that plug error paths or fix typos. New Drivers: - Qualcomm IPQ5424 Network Subsystem Clock Controller - Qualcomm SM8750 Video Clock Controller - Rockchip RV1126B and RK3506 clock drivers - i.MX8ULP SIM LPAV clock driver - Samsung ACPM (firmware interface) clock driver - Altera Agilex5 clock driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits) clk: keystone: fix compile testing clk: keystone: syscon-clk: fix regmap leak on probe failure clk: qcom: Mark camcc_sm7150_hws static clk: samsung: exynos-clkout: Assign .num before accessing .hws clk: rockchip: Add clock and reset driver for RK3506 dt-bindings: clock: rockchip: Add RK3506 clock and reset unit clk: actions: Fix discarding const qualifier by 'container_of' macro clk: spacemit: Set clk_hw_onecell_data::num before using flex array clk: visconti: Add VIIF clocks dt-bindings: clock: tmpv770x: Add VIIF clocks dt-bindings: clock: tmpv770x: Remove definition of number of clocks clk: visconti: Do not define number of clocks in bindings clk: rockchip: Add clock controller for the RV1126B dt-bindings: clock, reset: Add support for rv1126b clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll() clk: qcom: x1e80100-dispcc: Add USB4 router link resets dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750 dt-bindings: clock: qcom: Add SM8750 video clock controller clk: qcom: branch: Extend invert logic for branch2 mem clocks ...