commit 9ba71705706aa83bcd7f9b74ae2d167da934c951 upstream. The Tegra124 clock driver currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 238e14055da87d0d012257788e39fe0df3a82226 upstream. If parent device does not have of_node set the s2mps11_clk_parse_dt() returned NULL. This NULL was later passed to of_clk_add_provider() which dereferenced it in pr_debug() call. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8559087f0e9722a95df43fa5968bd1ee42bcf540 upstream. When arch/arm/mach-omap2/gpmc.c calls clk_get(..., "fck"), it will get a dummy clock and try to use it. As the rate is configured to zero, this will result in several divisions by zero, and misconfigured timings, with devices on the bus being lost in the La La Land. It is better to remove gpmc_fck from the dummy clocks, so that gpmc.c can fail gracefully. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull clk driver fix from Mike Turquette: "Single fix for a clock driver merged in 3.14-rc1. Without this fix the CPU frequency cannot be scaled" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: shmobile: rcar-gen2: Use kick bit to allow Z clock frequency change
The Z clock frequency change is effective only after setting the kick bit located in the FRQCRB register. Without that, the CA15 CPUs clock rate will never change. Fix that by checking if the kick bit is cleared and enable it to make the clock rate change effective. The bit is cleared automatically upon completion. Signed-off-by: Benoit Cousson <bcousson+renesas@baylibre.com> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
cppcheck detected following error [clk-master.c:245]: (error) Memory leak: characteristics The original code forgot to free characteristics when irq_of_parse_and_map() failed. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
The Nomadik debugfs screws up multiplatform boots if debugfs is enabled on the multiplatform image, since it's a simple initcall that is unconditionally executed and reads from certain memory locations. Fix this by checking that the driver has been properly initialized, so a base offset to the Nomadik SRC controller exists, before proceeding to register debugfs files. Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Ensure clk->kref is dereferenced only when clk is not NULL. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Fixes stray access to undefined registers, use of wrong clock parents & running clocks at wrong rates. All of these issues cause regressions in the form of boards that are unable to boot or crash and die horrible deaths.
Tegra124 does not have gr2d and gr3d clocks. They have been replaced by the vic03 and gpu clocks respectively. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>