While RTC clock was added in H616 ccu_common list, it was not in H6
list. That caused invalid pointer dereference like this:

Unable to handle kernel NULL pointer dereference at virtual address 000000000000020c
Mem abort info:
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x04: level 0 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000004d574000
[000000000000020c] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
CPU: 3 PID: 339 Comm: cat Tainted: G    B             5.18.0-rc1+ #1352
Hardware name: Tanix TX6 (DT)
pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ccu_gate_is_enabled+0x48/0x74
lr : ccu_gate_is_enabled+0x40/0x74
sp : ffff80000c0b76d0
x29: ffff80000c0b76d0 x28: 00000000016e3600 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000002 x24: ffff00000952fe08
x23: ffff800009611400 x22: ffff00000952fe79 x21: 0000000000000000
x20: 0000000000000001 x19: ffff80000aad6f08 x18: 0000000000000000
x17: 2d2d2d2d2d2d2d2d x16: 2d2d2d2d2d2d2d2d x15: 2d2d2d2d2d2d2d2d
x14: 0000000000000000 x13: 00000000f2f2f2f2 x12: ffff700001816e89
x11: 1ffff00001816e88 x10: ffff700001816e88 x9 : dfff800000000000
x8 : ffff80000c0b7447 x7 : 0000000000000001 x6 : ffff700001816e88
x5 : ffff80000c0b7440 x4 : 0000000000000001 x3 : ffff800008935c50
x2 : dfff800000000000 x1 : 0000000000000000 x0 : 000000000000020c
Call trace:
 ccu_gate_is_enabled+0x48/0x74
 clk_core_is_enabled+0x7c/0x1c0
 clk_summary_show_subtree+0x1dc/0x334
 clk_summary_show_subtree+0x250/0x334
 clk_summary_show_subtree+0x250/0x334
 clk_summary_show_subtree+0x250/0x334
 clk_summary_show_subtree+0x250/0x334
 clk_summary_show+0x90/0xdc
 seq_read_iter+0x248/0x6d4
 seq_read+0x17c/0x1fc
 full_proxy_read+0x90/0xf0
 vfs_read+0xdc/0x28c
 ksys_read+0xc8/0x174
 __arm64_sys_read+0x44/0x5c
 invoke_syscall+0x60/0x190
 el0_svc_common.constprop.0+0x7c/0x160
 do_el0_svc+0x38/0xa0
 el0_svc+0x68/0x160
 el0t_64_sync_handler+0x10c/0x140
 el0t_64_sync+0x18c/0x190
Code: d1006260 97e5c981 785e8260 8b0002a0 (b9400000)
---[ end trace 0000000000000000 ]---

Fix that by adding rtc clock to H6 ccu_common list too.

Fixes: 38d321b61bda ("clk: sunxi-ng: h6-r: Add RTC gate clock")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220719183725.2605141-1-jernej.skrabec@gmail.com
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The register address used for the clock gate register is the base
register address coming from first reg map (ie. the generic
clock registers) instead of the second reg map defining the clock
gate register.

Use the correct clock gate register address.

Fixes: 5ad5915dea00 ("clk: lan966x: Extend lan966x clock driver for clock gating support")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.

Fixes: 637cee5ffc71 ("clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220608021154.990347-1-weiyongjun1@huawei.com
Tested-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.19-rc1.

  Lots of tiny driver core changes and cleanups happened this cycle, but
  the two major things are:

   - firmware_loader reorganization and additions including the ability
     to have XZ compressed firmware images and the ability for userspace
     to initiate the firmware load when it needs to, instead of being
     always initiated by the kernel. FPGA devices specifically want this
     ability to have their firmware changed over the lifetime of the
     system boot, and this allows them to work without having to come up
     with yet-another-custom-uapi interface for loading firmware for
     them.

   - physical location support added to sysfs so that devices that know
     this information, can tell userspace where they are located in a
     common way. Some ACPI devices already support this today, and more
     bus types should support this in the future.

  Smaller changes include:

   - driver_override api cleanups and fixes

   - error path cleanups and fixes

   - get_abi script fixes

   - deferred probe timeout changes.

  It's that last change that I'm the most worried about. It has been
  reported to cause boot problems for a number of systems, and I have a
  tested patch series that resolves this issue. But I didn't get it
  merged into my tree before 5.18-final came out, so it has not gotten
  any linux-next testing.

  I'll send the fixup patches (there are 2) as a follow-on series to this
  pull request.

  All have been tested in linux-next for weeks, with no reported issues
  other than the above-mentioned boot time-outs"

* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  driver core: fix deadlock in __device_attach
  kernfs: Separate kernfs_pr_cont_buf and rename_lock.
  topology: Remove unused cpu_cluster_mask()
  driver core: Extend deferred probe timeout on driver registration
  MAINTAINERS: add Russ Weight as a firmware loader maintainer
  driver: base: fix UAF when driver_attach failed
  test_firmware: fix end of loop test in upload_read_show()
  driver core: location: Add "back" as a possible output for panel
  driver core: location: Free struct acpi_pld_info *pld
  driver core: Add "*" wildcard support to driver_async_probe cmdline param
  driver core: location: Check for allocations failure
  arch_topology: Trace the update thermal pressure
  kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
  export: fix string handling of namespace in EXPORT_SYMBOL_NS
  rpmsg: use local 'dev' variable
  rpmsg: Fix calling device_lock() on non-initialized device
  firmware_loader: describe 'module' parameter of firmware_upload_register()
  firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
  firmware_loader: Fix configs for sysfs split
  selftests: firmware: Add firmware upload selftests
  ...

Pull more ARM multiplatform updates from Arnd Bergmann:
 "The second part of the multiplatform changes now converts the
  Intel/Marvell PXA platform along with the rest. The patches went
  through several rebases before the merge window as bugs were found, so
  they remained separate.

  This has to touch a lot of drivers, in particular the touchscreen,
  pcmcia, sound and clk bits, to detach the driver files from the
  platform and board specific header files"

* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  ARM: pxa/mmp: remove traces of plat-pxa
  ARM: pxa: convert to multiplatform
  ARM: pxa/sa1100: move I/O space to PCI_IOBASE
  ARM: pxa: remove support for MTD_XIP
  ARM: pxa: move mach/*.h to mach-pxa/
  ARM: PXA: fix multi-cpu build of xsc3
  ARM: pxa: move plat-pxa to drivers/soc/
  ARM: mmp: rename pxa_register_device
  ARM: mmp: remove tavorevb board support
  ARM: pxa: remove unused mach/bitfield.h
  ARM: pxa: move clk register definitions to driver
  ARM: pxa: move smemc register access from clk to platform
  cpufreq: pxa3: move clk register access to clk driver
  ARM: pxa: remove get_clk_frequency_khz()
  ARM: pxa: pcmcia: move smemc configuration back to arch
  ASoC: pxa: i2s: use normal MMIO accessors
  ASoC: pxa: ac97: use normal MMIO accessors
  ASoC: pxa: use pdev resource for FIFO regs
  Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
  Input: wm97xx - switch to using threaded IRQ
  ...

Pull dmaengine updates from Vinod Koul:
 "Nothing special, this includes a couple of new device support and new
  driver support and bunch of driver updates.

  New support:

   - Tegra gpcdma driver support

   - Qualcomm SM8350, Sm8450 and SC7280 device support

   - Renesas RZN1 dma and platform support

  Updates:

   - stm32 device pause/resume support and updates

   - DMA memset ops Documentation and usage clarification

   - deprecate '#dma-channels' & '#dma-requests' bindings

   - driver updates for stm32, ptdma idsx etc"

* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
  dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
  dmaengine: sun6i: Add support for the D1 variant
  dmaengine: sun6i: Add support for 34-bit physical addresses
  dmaengine: sun6i: Do not use virt_to_phys
  dt-bindings: dma: sun50i-a64: Add compatible for D1
  dmaengine: tegra: Remove unused switch case
  dmaengine: tegra: Fix uninitialized variable usage
  dmaengine: stm32-dma: add device_pause/device_resume support
  dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
  dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
  dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
  dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
  dmaengine: qcom: gpi: Add support for sc7280
  dt-bindings: dma: pl330: Add power-domains
  dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
  dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
  dmaengine: stm32-mdma: remove GISR1 register
  dmaengine: ti: deprecate '#dma-channels'
  dmaengine: mmp: deprecate '#dma-channels'
  dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
  ...

Pull clk updates from Stephen Boyd:
 "Mainly driver updates this time around.

  There's a single patch to the core clk framework that simplifies a
  runtime PM call. Otherwise the majority of the diff falls to a few SoC
  drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
  hardware support and what comes along with that is quite a few lines
  of data and some clk_ops code.

  Beyond the new hardware support we have the usual pile of driver
  updates that add missing clks on already supported SoCs or fix up
  problems like bad clk tree descriptions. It's nice to see that more
  drivers are moving to clk_hw based APIs too.

  New Drivers:
   - Add STM32MP13 RCC driver (Reset Clock Controller)
   - MediaTek MT8186 SoC clk support
   - Airoha EN7523 SoC system clocks
   - Clock driver for exynosautov9 SoC
   - Renesas R-Car V4H and RZ/V2M SoCs
   - Renesas RZ/G2UL SoC
   - LPASS clk driver for Qualcomm sc7280 SoC
   - GCC clk driver for Qualcomm SC8280XP SoC

  Updates:
   - SDCC uses floor clk ops on Qualcomm MSM8976
   - Add modem reset and fix RPM clks on Qualcomm MSM8976
   - Add the two missing CLKOUT clocks for U8500/DB8500 SoC
   - Mark some clks critical on Ingenic X1000
   - Convert ux500 to clk_hw
   - Move MediaTek driver to clk_hw provider APIs
   - Use i2c driver probe_new to avoid id scans
   - Convert a number of Rockchip dt bindings to YAML
   - Mark hclk_vo critical on Rockchip rk3568
   - Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
   - Various cleanups like memory allocation error checks and plugged
     leaks
   - Allwinner H6 RTC clock support
   - Allwinner H616 32 kHz clock support
   - Add the Universal Flash Storage clock on Renesas R-Car S4-8
   - Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
     I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
     RZ/G2UL
   - Add display clock support on Renesas RZ/G2L
   - Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
   - Add 27 MHz phy PLL ref clock on i.MX
   - Add mcore_booted module parameter to tell kernel M core has already
     booted for i.MX
   - Remove snvs clock on i.MX because it was for secure world only
   - Add dt bindings for i.MX8MN GPT
   - Add DISP2 pixel clock for i.MX8MP
   - Add clkout1/2 for i.MX8MP
   - Fix parent clock of ubs_root_clk for i.MX8MP
   - Implement better RCG parking on Qualcomm SoCs using the shared RCG
     clk ops
   - Kerneldoc fixes
   - Switch Tegra BPMP to determine_rate clk op
   - Add a pointer to dt schema for generic clock bindings"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
  Revert "clk: qcom: regmap-mux: add pipe clk implementation"
  Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
  Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
  clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
  clk: stm32mp13: add safe mux management
  clk: stm32mp13: add multi mux function
  clk: stm32mp13: add all STM32MP13 kernel clocks
  clk: stm32mp13: add all STM32MP13 peripheral clocks
  clk: stm32mp13: manage secured clocks
  clk: stm32mp13: add composite clock
  clk: stm32mp13: add stm32 divider clock
  clk: stm32mp13: add stm32_gate management
  clk: stm32mp13: add stm32_mux clock management
  clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
  dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
  clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
  clk: ti: composite: Prefer kcalloc over open coded arithmetic
  dt-bindings: clock: exynosautov9: correct count of NR_CLK
  clk: mediatek: mt8173: Switch to clk_hw provider APIs
  clk: mediatek: Switch to clk_hw provider APIs
  ...

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree contains three separate changes for linux-5.19:

   - The h8300 architecture is retired after it has been effectively
     unmaintained for a number of years. This is the last architecture
     we supported that has no MMU implementation, but there are still a
     few architectures (arm, m68k, riscv, sh and xtensa) that support
     CPUs with and without an MMU.

   - A series to add a generic ticket spinlock that can be shared by
     most architectures with a working cmpxchg or ll/sc type atomic,
     including the conversion of riscv, csky and openrisc. This series
     is also a prerequisite for the loongarch64 architecture port that
     will come as a separate pull request.

   - A cleanup of some exported uapi header files to ensure they can be
     included from user space without relying on other kernel headers"

* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  h8300: remove stale bindings and symlink
  sparc: add asm/stat.h to UAPI compile-test coverage
  powerpc: add asm/stat.h to UAPI compile-test coverage
  mips: add asm/stat.h to UAPI compile-test coverage
  riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
  kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
  agpgart.h: do not include <stdlib.h> from exported header
  csky: Move to generic ticket-spinlock
  RISC-V: Move to queued RW locks
  RISC-V: Move to generic spinlocks
  openrisc: Move to ticket-spinlock
  asm-generic: qrwlock: Document the spinlock fairness requirements
  asm-generic: qspinlock: Indicate the use of mixed-size atomics
  asm-generic: ticket-lock: New generic ticket-based spinlock
  remove the h8300 architecture

* clk-qcom:
  Revert "clk: qcom: regmap-mux: add pipe clk implementation"
  Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
  Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
  clk: qcom: rcg2: Cache CFG register updates for parked RCGs
  clk: qcom: add sc8280xp GCC driver
  dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings
  clk: qcom: gcc-msm8976: Add modem reset
  dt-bindings: clk: qcom: gcc-msm8976: Add modem reset
  clk: qcom: gcc-msm8976: Set floor ops for SDCC
  dt-bindings: clock: qcom,gcc-apq8064: Fix typo in compatible and split apq8084
  clk: qcom: smd: Update MSM8976 RPM clocks.
  clk: qcom: gcc-msm8998: add SSC-related clocks
  dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks
  dt-bindings: clock: qcom,rpmcc: add clocks property
  dt-bindings: clock: qcom,rpmcc: convert to dtschema
  clk: qcom: lpass: Add support for LPASS clock controller for SC7280
  dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280
  clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks
  clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks
  clk: qcom: regmap-mux: add pipe clk implementation

 - Mark some clks critical on Ingenic X1000
 - Add STM32MP13 RCC driver (Reset Clock Controller)

* clk-rockchip:
  dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML
  dt-bindings: clock: convert rockchip,px30-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML
  dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML
  dt-binding: clock: Add missing rk3568 cru bindings
  clk: rockchip: Mark hclk_vo as critical on rk3568
  dt-bindings: clock: fix rk3399 cru clock issues
  dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml
  dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml
  dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml

* clk-ingenic:
  clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs
  mips: ingenic: Do not manually reference the CPU clock
  clk: ingenic: Mark critical clocks in Ingenic SoCs
  clk: ingenic: Allow specifying common clock flags

* clk-bindings:
  dt-bindings: clock: Replace common binding with link to schema

* clk-samsung:
  dt-bindings: clock: exynosautov9: correct count of NR_CLK
  clk: samsung: exynosautov9: add cmu_peric1 clock support
  clk: samsung: exynosautov9: add cmu_peric0 clock support
  clk: samsung: exynosautov9: add cmu_fsys2 clock support
  clk: samsung: exynosautov9: add cmu_busmc clock support
  clk: samsung: exynosautov9: add cmu_peris clock support
  clk: samsung: exynosautov9: add cmu_core clock support
  clk: samsung: add top clock support for Exynos Auto v9 SoC
  dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
  dt-bindings: clock: add clock binding definitions for Exynos Auto v9

* clk-stm:
  clk: stm32mp13: add safe mux management
  clk: stm32mp13: add multi mux function
  clk: stm32mp13: add all STM32MP13 kernel clocks
  clk: stm32mp13: add all STM32MP13 peripheral clocks
  clk: stm32mp13: manage secured clocks
  clk: stm32mp13: add composite clock
  clk: stm32mp13: add stm32 divider clock
  clk: stm32mp13: add stm32_gate management
  clk: stm32mp13: add stm32_mux clock management
  clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
  dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC