linux-toradex.git/drivers/clk, branch v6.3-rc1 Linux kernel for Apalis and Colibri modules Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2023-02-25T23:16:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-25T23:16:23+00:00 1ec35eadc3b448c91a6b763371a7073444e95f9d Pull clk updates from Stephen Boyd: "We have one small patch to the clk core this time around. It fixes a corner case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled() where it hangs the system. We'll simply assume the clk is disabled if the parent is disabled and the flag is set. Trying to turn on the parent to check the enable state of the clk runs into system hangs at boot. We let this bake in -next for a couple weeks to make sure there aren't any more issues because the last attempt to fix this ran into hangs and had to be reverted. Note: There were some more patches to the core framework around sync_state and disabling unused clks, but I asked for that to be reverted from the qcom PR because it isn't ready and we're still discussing the best solution on the list. Outside of the core clk framework, we have the usual collection of clk driver updates and support for new SoCs (which seems to never stop). The dirstat is dominated by Qualcomm because they added support for quite a few SoCs this time around and also migrated quite a few of their drivers to clk_parent_data. The other big diff is in the Mediatek clk drivers that saw a significant rework this cycle to similarly modernize the code, and we'll see that work continue in the next cycle as well. Nothing really jumps out as scary here, except that the significant churn in parent data descriptions can have typos that go unnoticed. More details below. Core: - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() New Drivers: - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref clocks - Support for Mediatek MT7891 SoC clks - Support for many Qualcomm clk controllers: - QDU1000/QRU1000 global clock controller - SA8775P global clock controller - SM8550 TCSR and display clock controller - SM6350 clock controller - MSM8996 CBF and APCS clock controllers Updates: - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Versa 5P49V60 clks - Disable R-Car H3 ES1.*, as it was only available to an internal development group and needed a lot of quirks and workarounds - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and resets on Renesas RZ/V2M - Add display clocks on Renesas R-Car V4H - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L - Free the imx_uart_clocks even if imx_register_uart_clocks returns early - Get the stdout clocks count from device tree on i.MX - Drop the clock count argument from imx_register_uart_clocks() - Keep the uart clocks on i.MX93 for when earlycon is used - Fix SPDX comment in i.MX6SLL clocks bindings header - Drop some unnecessary spaces from i.MX8ULP clocks bindings header - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is not configured via devicetree - Fix the ENET1 gate configuration for i.MX6UL according to the reference manual - Add ENET refclock mux support for i.MX6UL - Add support for USB host/device configuration on Renesas RZ/N1 - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H - Add D1 CAN bus gates and resets for Allwinner - Mark D1 CPUX clock as critical on Allwinner - Reuse D1 driver for Allwinner R528/T113 - Cleanup sunxi-ng Kconfig - Fix sunxi-ng kernel-doc issues - Model Allwinner H3/H5 DRAM clock as fixed clock - Use .determine_rate() instead of .round_rate() for the dualdiv, mpll, sclk-div and cpu-dyn-div amlogic clock drivers - DDR clocks were marked as critical in the proper clock driver for each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted in the next releases as it only does clock enablement - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of them may use it - Support synchronous power_off requests in the qcom GDSC driver for proper GPU power collapse - Drop test clocks from various Qualcomm clk drivers - Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers - Fixes for the Qualcomm MSM8996 CPU clock controller - Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk - Add GDSCs in the global clock controller for Qualcomm QCS404 - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms - De-duplicate identical clks in Qualcomm SMD RPM clk driver - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to Qualcomm SDM RPM clk driver - Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused clk: imx: pll14xx: fix recalc_rate for negative kdiv clk: rs9: Drop unused pin_xin field MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function clk: mediatek: clk-mtk: Remove unneeded semicolon dt-bindings: clock: remove stih416 bindings dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file clk: imx: fix compile testing imxrt1050 clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include ... 
Pull clk updates from Stephen Boyd:
 "We have one small patch to the clk core this time around. It fixes a
  corner case with the CLK_OPS_PARENT_ENABLE flag combined with
  clk_core_is_enabled() where it hangs the system. We'll simply assume
  the clk is disabled if the parent is disabled and the flag is set.
  Trying to turn on the parent to check the enable state of the clk runs
  into system hangs at boot. We let this bake in -next for a couple
  weeks to make sure there aren't any more issues because the last
  attempt to fix this ran into hangs and had to be reverted.

  Note: There were some more patches to the core framework around
  sync_state and disabling unused clks, but I asked for that to be
  reverted from the qcom PR because it isn't ready and we're still
  discussing the best solution on the list.

  Outside of the core clk framework, we have the usual collection of clk
  driver updates and support for new SoCs (which seems to never stop).
  The dirstat is dominated by Qualcomm because they added support for
  quite a few SoCs this time around and also migrated quite a few of
  their drivers to clk_parent_data. The other big diff is in the
  Mediatek clk drivers that saw a significant rework this cycle to
  similarly modernize the code, and we'll see that work continue in the
  next cycle as well. Nothing really jumps out as scary here, except
  that the significant churn in parent data descriptions can have typos
  that go unnoticed. More details below.

  Core:
   - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()

  New Drivers:
   - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
     ref clocks
   - Support for Mediatek MT7891 SoC clks
   - Support for many Qualcomm clk controllers:
      - QDU1000/QRU1000 global clock controller
      - SA8775P global clock controller
      - SM8550 TCSR and display clock controller
      - SM6350 clock controller
      - MSM8996 CBF and APCS clock controllers

  Updates:
   - Various cleanups and improvements to Mediatek clk drivers to reduce
     code size and modernize the drivers
   - Support for Versa 5P49V60 clks
   - Disable R-Car H3 ES1.*, as it was only available to an internal
     development group and needed a lot of quirks and workarounds
   - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
     resets on Renesas RZ/V2M
   - Add display clocks on Renesas R-Car V4H
   - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
   - Free the imx_uart_clocks even if imx_register_uart_clocks returns
     early
   - Get the stdout clocks count from device tree on i.MX
   - Drop the clock count argument from imx_register_uart_clocks()
   - Keep the uart clocks on i.MX93 for when earlycon is used
   - Fix SPDX comment in i.MX6SLL clocks bindings header
   - Drop some unnecessary spaces from i.MX8ULP clocks bindings header
   - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
     not configured via devicetree
   - Fix the ENET1 gate configuration for i.MX6UL according to the
     reference manual
   - Add ENET refclock mux support for i.MX6UL
   - Add support for USB host/device configuration on Renesas RZ/N1
   - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
     V4H
   - Add D1 CAN bus gates and resets for Allwinner
   - Mark D1 CPUX clock as critical on Allwinner
   - Reuse D1 driver for Allwinner R528/T113
   - Cleanup sunxi-ng Kconfig
   - Fix sunxi-ng kernel-doc issues
   - Model Allwinner H3/H5 DRAM clock as fixed clock
   - Use .determine_rate() instead of .round_rate() for the dualdiv,
     mpll, sclk-div and cpu-dyn-div amlogic clock drivers
   - DDR clocks were marked as critical in the proper clock driver for
     each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
     in the next releases as it only does clock enablement
   - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
     of them may use it
   - Support synchronous power_off requests in the qcom GDSC driver for
     proper GPU power collapse
   - Drop test clocks from various Qualcomm clk drivers
   - Update parent references to use clk_parent_data/clk_hw in various
     Qualcomm clk drivers
   - Fixes for the Qualcomm MSM8996 CPU clock controller
   - Transition Qualcomm MSM8974 GCC off the externally defined
     sleep_clk
   - Add GDSCs in the global clock controller for Qualcomm QCS404
   - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
   - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
     SDM845 are moved to use the recently introduced properties in the
     GDSC struct
   - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
     the IPA clock is added on a variety of platforms
   - De-duplicate identical clks in Qualcomm SMD RPM clk driver
   - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
     to Qualcomm SDM RPM clk driver
   - Various Qualcomm clk drivers use devm_pm_runtime_enable() to
     simplify"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
  clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
  clk: qcom: Revert sync_state based clk_disable_unused
  clk: imx: pll14xx: fix recalc_rate for negative kdiv
  clk: rs9: Drop unused pin_xin field
  MAINTAINERS: clk: imx: Add Peng Fan as reviewer
  clk: sprd: Add dependency for SPRD_UMS512_CLK
  clk: ralink: fix 'mt7621_gate_is_enabled()' function
  clk: mediatek: clk-mtk: Remove unneeded semicolon
  dt-bindings: clock: remove stih416 bindings
  dt-bindings: clock: add loongson-2 clock
  dt-bindings: clock: add loongson-2 clock include file
  clk: imx: fix compile testing imxrt1050
  clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
  clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
  clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
  dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
  clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
  clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
  dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
  clk: qcom: cpu-8996: add missing cputype include
  ...
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2023-02-24T20:07:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-24T20:07:00+00:00 72bffe7e1eb6cb82b90aa14cd786f3f5ede9e0ae Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1. Nothing major in here, just lots of good development, including: - Thunderbolt additions for new device support and features - xhci driver updates and cleanups - USB gadget media driver updates (includes media core changes that were acked by the v4l2 maintainers) - lots of other USB gadget driver updates for new features - dwc3 driver updates and fixes - minor debugfs leak fixes - typec driver updates and additions - dt-bindings conversions to yaml - other small bugfixes and driver updates All have been in linux-next for a while with no reported issues" * tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits) usb: dwc3: xilinx: Remove unused of_gpio,h usb: typec: pd: Add higher capability sysfs for sink PDO usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO usb: dwc3: pci: add support for the Intel Meteor Lake-M usb: gadget: u_ether: Don't warn in gether_setup_name_default() usb: gadget: u_ether: Convert prints to device prints usb: gadget: u_serial: Add null pointer check in gserial_resume usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails xhci: host: potential NULL dereference in xhci_generic_plat_probe() dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev of: device: Do not ignore error code in of_device_uevent_modalias of: device: Ignore modalias of reused nodes usb: gadget: configfs: Fix set but not used variable warning usb: gadget: uvc: Use custom strings if available usb: gadget: uvc: Allow linking function to string descs usb: gadget: uvc: Pick up custom string descriptor IDs usb: gadget: uvc: Allow linking XUs to string descriptors usb: gadget: configfs: Attach arbitrary strings to cdev usb: gadget: configfs: Support arbitrary string descriptors ... 
Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.

  Nothing major in here, just lots of good development, including:

   - Thunderbolt additions for new device support and features

   - xhci driver updates and cleanups

   - USB gadget media driver updates (includes media core changes that
     were acked by the v4l2 maintainers)

   - lots of other USB gadget driver updates for new features

   - dwc3 driver updates and fixes

   - minor debugfs leak fixes

   - typec driver updates and additions

   - dt-bindings conversions to yaml

   - other small bugfixes and driver updates

  All have been in linux-next for a while with no reported issues"

* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
  usb: dwc3: xilinx: Remove unused of_gpio,h
  usb: typec: pd: Add higher capability sysfs for sink PDO
  usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
  usb: dwc3: pci: add support for the Intel Meteor Lake-M
  usb: gadget: u_ether: Don't warn in gether_setup_name_default()
  usb: gadget: u_ether: Convert prints to device prints
  usb: gadget: u_serial: Add null pointer check in gserial_resume
  usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
  xhci: host: potential NULL dereference in xhci_generic_plat_probe()
  dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
  usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
  of: device: Do not ignore error code in of_device_uevent_modalias
  of: device: Ignore modalias of reused nodes
  usb: gadget: configfs: Fix set but not used variable warning
  usb: gadget: uvc: Use custom strings if available
  usb: gadget: uvc: Allow linking function to string descs
  usb: gadget: uvc: Pick up custom string descriptor IDs
  usb: gadget: uvc: Allow linking XUs to string descriptors
  usb: gadget: configfs: Attach arbitrary strings to cdev
  usb: gadget: configfs: Support arbitrary string descriptors
  ...
Merge branches 'clk-loongson' and 'clk-qcom' into clk-next 2023-02-23T19:04:25+00:00 Stephen Boyd sboyd@kernel.org 2023-02-23T19:04:25+00:00 b64baafa24d2c430513329daf5ebb821620d0c03 * clk-loongson: dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file * clk-qcom: (143 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include clk: qcom: gcc-sa8775p: remove unused variables clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform clk: qcom: add msm8996 Core Bus Framework (CBF) support dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller clk: qcom: add the driver for the MSM8996 APCS clocks clk: qcom: gcc-qcs404: fix duplicate initializer warning clk: qcom: cpu-8996: change setup sequence to follow vendor kernel clk: qcom: cpu-8996: fix PLL clock ops clk: qcom: cpu-8996: fix ACD initialization clk: qcom: cpu-8996: fix PLL configuration sequence clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call clk: qcom: cpu-8996: setup PLLs before registering clocks clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb ... 
* clk-loongson:
  dt-bindings: clock: add loongson-2 clock
  dt-bindings: clock: add loongson-2 clock include file

* clk-qcom: (143 commits)
  clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
  clk: qcom: Revert sync_state based clk_disable_unused
  dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
  clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
  clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
  dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
  clk: qcom: cpu-8996: add missing cputype include
  clk: qcom: gcc-sa8775p: remove unused variables
  clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform
  clk: qcom: add msm8996 Core Bus Framework (CBF) support
  dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller
  clk: qcom: add the driver for the MSM8996 APCS clocks
  clk: qcom: gcc-qcs404: fix duplicate initializer warning
  clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
  clk: qcom: cpu-8996: fix PLL clock ops
  clk: qcom: cpu-8996: fix ACD initialization
  clk: qcom: cpu-8996: fix PLL configuration sequence
  clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
  clk: qcom: cpu-8996: setup PLLs before registering clocks
  clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
  ...
Merge branches 'clk-microchip', 'clk-allwinner', 'clk-mediatek', 'clk-imx' and 'clk-core' into clk-next 2023-02-23T19:04:12+00:00 Stephen Boyd sboyd@kernel.org 2023-02-23T19:04:12+00:00 60950df7b4a8a5fa18be936bdac4edab23fef4bc - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Mediatek MT7891 SoC clks * clk-microchip: clk: at91: do not compile dt-compat.c for sama7g5 and sam9x60 clk: at91: mark ddr clocks as critical * clk-allwinner: clk: sunxi-ng: d1: Add CAN bus gates and resets dt-bindings: clock: Add D1 CAN bus gates and resets clk: sunxi-ng: d1: Mark cpux clock as critical clk: sunxi-ng: d1: Allow building for R528/T113 clk: sunxi-ng: Move SoC driver conditions to dependencies clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies clk: sunxi-ng: Avoid computing the rate twice clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues * clk-mediatek: (29 commits) clk: mediatek: clk-mtk: Remove unneeded semicolon clk: mediatek: remove MT8195 vppsys/0/1 simple_probe dt-bindings: arm: mediatek: migrate MT8195 vppsys0/1 to mtk-mmsys driver clk: mediatek: add MT7981 clock support dt-bindings: clock: mediatek: add mt7981 clock IDs dt-bindings: clock: Add compatibles for MT7981 clk: mediatek: clk-mt7986-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt7986-topckgen: Properly keep some clocks enabled clk: mediatek: clk-mt6795-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt8186-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt8192: Migrate topckgen to mtk_clk_simple_probe() clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe() clk: mediatek: clk-mt8183: Join top_aud_muxes and top_aud_divs clk: mediatek: mt8186: Join top_adj_div and top_muxes clk: mediatek: mt8192: Join top_adj_divs and top_muxes clk: mediatek: clk-mt8192: Move CLK_TOP_CSW_F26M_D2 in top_divs clk: mediatek: mt8173: Migrate pericfg/topckgen to mtk_clk_simple_probe() clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe() clk: mediatek: Switch to mtk_clk_simple_probe() where possible clk: mediatek: mt8173: Break down clock drivers and allow module build ... * clk-imx: clk: imx: pll14xx: fix recalc_rate for negative kdiv MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: imx: fix compile testing imxrt1050 clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: imx6ul: add ethernet refclock mux support clk: imx6ul: fix enet1 gate configuration clk: imx: add imx_obtain_fixed_of_clock() clk: imx6q: add ethernet refclock mux support clk: imx: add clk-gpr-mux driver dt-bindings: imx8ulp: clock: no spaces before tabs clk: imx6sll: add proper spdx license identifier clk: imx: imx93: invoke imx_register_uart_clocks clk: imx: remove clk_count of imx_register_uart_clocks clk: imx: get stdout clk count from device tree clk: imx: avoid memory leak * clk-core: clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() 
 - Various cleanups and improvements to Mediatek clk drivers to reduce
   code size and modernize the drivers
 - Support for Mediatek MT7891 SoC clks

* clk-microchip:
  clk: at91: do not compile dt-compat.c for sama7g5 and sam9x60
  clk: at91: mark ddr clocks as critical

* clk-allwinner:
  clk: sunxi-ng: d1: Add CAN bus gates and resets
  dt-bindings: clock: Add D1 CAN bus gates and resets
  clk: sunxi-ng: d1: Mark cpux clock as critical
  clk: sunxi-ng: d1: Allow building for R528/T113
  clk: sunxi-ng: Move SoC driver conditions to dependencies
  clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
  clk: sunxi-ng: Avoid computing the rate twice
  clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock
  clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues

* clk-mediatek: (29 commits)
  clk: mediatek: clk-mtk: Remove unneeded semicolon
  clk: mediatek: remove MT8195 vppsys/0/1 simple_probe
  dt-bindings: arm: mediatek: migrate MT8195 vppsys0/1 to mtk-mmsys driver
  clk: mediatek: add MT7981 clock support
  dt-bindings: clock: mediatek: add mt7981 clock IDs
  dt-bindings: clock: Add compatibles for MT7981
  clk: mediatek: clk-mt7986-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt7986-topckgen: Properly keep some clocks enabled
  clk: mediatek: clk-mt6795-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt8186-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt8192: Migrate topckgen to mtk_clk_simple_probe()
  clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
  clk: mediatek: clk-mt8183: Join top_aud_muxes and top_aud_divs
  clk: mediatek: mt8186: Join top_adj_div and top_muxes
  clk: mediatek: mt8192: Join top_adj_divs and top_muxes
  clk: mediatek: clk-mt8192: Move CLK_TOP_CSW_F26M_D2 in top_divs
  clk: mediatek: mt8173: Migrate pericfg/topckgen to mtk_clk_simple_probe()
  clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe()
  clk: mediatek: Switch to mtk_clk_simple_probe() where possible
  clk: mediatek: mt8173: Break down clock drivers and allow module build
  ...

* clk-imx:
  clk: imx: pll14xx: fix recalc_rate for negative kdiv
  MAINTAINERS: clk: imx: Add Peng Fan as reviewer
  clk: imx: fix compile testing imxrt1050
  clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
  clk: imx6ul: add ethernet refclock mux support
  clk: imx6ul: fix enet1 gate configuration
  clk: imx: add imx_obtain_fixed_of_clock()
  clk: imx6q: add ethernet refclock mux support
  clk: imx: add clk-gpr-mux driver
  dt-bindings: imx8ulp: clock: no spaces before tabs
  clk: imx6sll: add proper spdx license identifier
  clk: imx: imx93: invoke imx_register_uart_clocks
  clk: imx: remove clk_count of imx_register_uart_clocks
  clk: imx: get stdout clk count from device tree
  clk: imx: avoid memory leak

* clk-core:
  clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
Merge branches 'clk-cleanup', 'clk-bindings', 'clk-renesas', 'clk-versa' and 'clk-amlogic' into clk-next 2023-02-23T19:03:54+00:00 Stephen Boyd sboyd@kernel.org 2023-02-23T19:03:54+00:00 792d6827288b05df93e487013118986fd14aee5c - Support for Versa 5P49V60 clks * clk-cleanup: clk: rs9: Drop unused pin_xin field clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function dt-bindings: clock: remove stih416 bindings drivers/clk: Remove "select SRCU" * clk-bindings: dt-bindings: clock: qcom,sm8450-camcc: constrain required-opps dt-bindings: clock: imx8m-clock: correct i.MX8MQ node name * clk-renesas: clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* clk: renesas: r8a779g0: Add CAN-FD clocks clk: renesas: r8a779g0: Tidy up DMAC name on SYS-DMAC clk: renesas: r8a779a0: Tidy up DMAC name on SYS-DMAC clk: renesas: r8a779g0: Add custom clock for PLL2 clk: renesas: cpg-mssr: Remove superfluous check in resume code clk: renesas: r9a06g032: Handle h2mode setting based on USBF presence clk: renesas: cpg-mssr: Fix use after free if cpg_mssr_common_init() failed clk: renesas: r9a07g044: Add clock and reset entries for CRU clk: renesas: r9a09g011: Add SDHI/eMMC clock and reset entries clk: renesas: r9a09g011: Add USB clock and reset entries clk: renesas: r9a09g011: Add TIM clock and reset entries clk: renesas: r8a779g0: Add display related clocks clk: renesas: rcar-gen4: Restore PLL enum sort order clk: renesas: r8a779g0: Fix OSC predividers clk: renesas: r9a09g011: Add PWM clock and reset entries * clk-versa: dt-bindings: clock: versaclock5: Document 5P49V60 compatible string clk: vc5: Add support for 5P49V60 clk: vc5: Use `clamp()` to restrict PLL range * clk-amlogic: clk: meson: clk-cpu-dyndiv: switch from .round_rate to .determine_rate clk: meson: sclk-div: switch from .round_rate to .determine_rate clk: meson: dualdiv: switch from .round_rate to .determine_rate clk: meson: mpll: Switch from .round_rate to .determine_rate 
 - Support for Versa 5P49V60 clks

* clk-cleanup:
  clk: rs9: Drop unused pin_xin field
  clk: sprd: Add dependency for SPRD_UMS512_CLK
  clk: ralink: fix 'mt7621_gate_is_enabled()' function
  dt-bindings: clock: remove stih416 bindings
  drivers/clk: Remove "select SRCU"

* clk-bindings:
  dt-bindings: clock: qcom,sm8450-camcc: constrain required-opps
  dt-bindings: clock: imx8m-clock: correct i.MX8MQ node name

* clk-renesas:
  clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
  clk: renesas: r8a779g0: Add CAN-FD clocks
  clk: renesas: r8a779g0: Tidy up DMAC name on SYS-DMAC
  clk: renesas: r8a779a0: Tidy up DMAC name on SYS-DMAC
  clk: renesas: r8a779g0: Add custom clock for PLL2
  clk: renesas: cpg-mssr: Remove superfluous check in resume code
  clk: renesas: r9a06g032: Handle h2mode setting based on USBF presence
  clk: renesas: cpg-mssr: Fix use after free if cpg_mssr_common_init() failed
  clk: renesas: r9a07g044: Add clock and reset entries for CRU
  clk: renesas: r9a09g011: Add SDHI/eMMC clock and reset entries
  clk: renesas: r9a09g011: Add USB clock and reset entries
  clk: renesas: r9a09g011: Add TIM clock and reset entries
  clk: renesas: r8a779g0: Add display related clocks
  clk: renesas: rcar-gen4: Restore PLL enum sort order
  clk: renesas: r8a779g0: Fix OSC predividers
  clk: renesas: r9a09g011: Add PWM clock and reset entries

* clk-versa:
  dt-bindings: clock: versaclock5: Document 5P49V60 compatible string
  clk: vc5: Add support for 5P49V60
  clk: vc5: Use `clamp()` to restrict PLL range

* clk-amlogic:
  clk: meson: clk-cpu-dyndiv: switch from .round_rate to .determine_rate
  clk: meson: sclk-div: switch from .round_rate to .determine_rate
  clk: meson: dualdiv: switch from .round_rate to .determine_rate
  clk: meson: mpll: Switch from .round_rate to .determine_rate
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP 2023-02-23T01:38:56+00:00 Stephen Boyd sboyd@kernel.org 2023-02-23T01:36:42+00:00 90039f3773f688922ca267c3e925f61ad6f28e22 Otherwise some configurations fail. Fixes: 027726365906 ("clk: qcom: add the driver for the MSM8996 APCS clocks") Link: https://lore.kernel.org/r/20230223013847.1218900-1-sboyd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Otherwise some configurations fail.

Fixes: 027726365906 ("clk: qcom: add the driver for the MSM8996 APCS clocks")
Link: https://lore.kernel.org/r/20230223013847.1218900-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: qcom: Revert sync_state based clk_disable_unused 2023-02-22T14:34:08+00:00 Bjorn Andersson andersson@kernel.org 2023-02-22T14:31:10+00:00 c1855dd0a62b7ead360eb9231fb65c2108efaf47 Revert the postponement of clk_disable_unused() for clock providers that implement sync_state, and the change to drivers implementing this, until agreement on the implementation has been reached. This reverts: 29e31415e14e ("clk: qcom: Remove need for clk_ignore_unused on sc8280xp") 99c0f7d35c4b ("clk: qcom: sdm845: Use generic clk_sync_state_disable_unused callback") 26b36df75166 ("clk: Add generic sync_state callback for disabling unused clocks") Requested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> 
Revert the postponement of clk_disable_unused() for clock providers that
implement sync_state, and the change to drivers implementing this, until
agreement on the implementation has been reached.

This reverts:
29e31415e14e ("clk: qcom: Remove need for clk_ignore_unused on sc8280xp")
99c0f7d35c4b ("clk: qcom: sdm845: Use generic clk_sync_state_disable_unused callback")
26b36df75166 ("clk: Add generic sync_state callback for disabling unused clocks")

Requested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
clk: imx: pll14xx: fix recalc_rate for negative kdiv 2023-02-21T17:34:36+00:00 Kevin Groeneveld kgroeneveld@lenbrook.com 2022-12-10T20:38:35+00:00 02d7bd1efb4280ea1a75ad1eece3f19537f82a19 kdiv is a signed 16 bit value in the DEV_CTL1 register. Commit 53990cf9d5b4 ("clk: imx: pll14xx: consolidate rate calculation") changed the kdiv variable from a short int to just int. When the value read from the DIV_CTL1 register is assigned directly to an int the sign of the value is lost resulting in incorrect results when the value is negative. Adding a s16 cast to the register value fixes the issue. Fixes: 53990cf9d5b4 ("clk: imx: pll14xx: consolidate rate calculation") Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Link: https://lore.kernel.org/r/20221210203835.9714-1-kgroeneveld@lenbrook.com Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
kdiv is a signed 16 bit value in the DEV_CTL1 register. Commit
53990cf9d5b4 ("clk: imx: pll14xx: consolidate rate calculation") changed
the kdiv variable from a short int to just int. When the value read from
the DIV_CTL1 register is assigned directly to an int the sign of the value
is lost resulting in incorrect results when the value is negative. Adding
a s16 cast to the register value fixes the issue.

Fixes: 53990cf9d5b4 ("clk: imx: pll14xx: consolidate rate calculation")
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20221210203835.9714-1-kgroeneveld@lenbrook.com
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2023-02-21T01:41:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-21T01:41:08+00:00 1f2d9ffc7a5f916935749ffc6e93fb33bfe94d2f Pull scheduler updates from Ingo Molnar: - Improve the scalability of the CFS bandwidth unthrottling logic with large number of CPUs. - Fix & rework various cpuidle routines, simplify interaction with the generic scheduler code. Add __cpuidle methods as noinstr to objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks. - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query previously issued registrations. - Limit scheduler slice duration to the sysctl_sched_latency period, to improve scheduling granularity with a large number of SCHED_IDLE tasks. - Debuggability enhancement on sys_exit(): warn about disabled IRQs, but also enable them to prevent a cascade of followup problems and repeat warnings. - Fix the rescheduling logic in prio_changed_dl(). - Micro-optimize cpufreq and sched-util methods. - Micro-optimize ttwu_runnable() - Micro-optimize the idle-scanning in update_numa_stats(), select_idle_capacity() and steal_cookie_task(). - Update the RSEQ code & self-tests - Constify various scheduler methods - Remove unused methods - Refine __init tags - Documentation updates - Misc other cleanups, fixes * tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits) sched/rt: pick_next_rt_entity(): check list_entry sched/deadline: Add more reschedule cases to prio_changed_dl() sched/fair: sanitize vruntime of entity being placed sched/fair: Remove capacity inversion detection sched/fair: unlink misfit task from cpu overutilized objtool: mem*() are not uaccess safe cpuidle: Fix poll_idle() noinstr annotation sched/clock: Make local_clock() noinstr sched/clock/x86: Mark sched_clock() noinstr x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read() x86/atomics: Always inline arch_atomic64*() cpuidle: tracing, preempt: Squash _rcuidle tracing cpuidle: tracing: Warn about !rcu_is_watching() cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG cpuidle: drivers: firmware: psci: Dont instrument suspend code KVM: selftests: Fix build of rseq test exit: Detect and fix irq disabled state in oops cpuidle, arm64: Fix the ARM64 cpuidle logic cpuidle: mvebu: Fix duplicate flags assignment sched/fair: Limit sched slice duration ... 
Pull scheduler updates from Ingo Molnar:

 - Improve the scalability of the CFS bandwidth unthrottling logic with
   large number of CPUs.

 - Fix & rework various cpuidle routines, simplify interaction with the
   generic scheduler code. Add __cpuidle methods as noinstr to objtool's
   noinstr detection and fix boatloads of cpuidle bugs & quirks.

 - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
   previously issued registrations.

 - Limit scheduler slice duration to the sysctl_sched_latency period, to
   improve scheduling granularity with a large number of SCHED_IDLE
   tasks.

 - Debuggability enhancement on sys_exit(): warn about disabled IRQs,
   but also enable them to prevent a cascade of followup problems and
   repeat warnings.

 - Fix the rescheduling logic in prio_changed_dl().

 - Micro-optimize cpufreq and sched-util methods.

 - Micro-optimize ttwu_runnable()

 - Micro-optimize the idle-scanning in update_numa_stats(),
   select_idle_capacity() and steal_cookie_task().

 - Update the RSEQ code & self-tests

 - Constify various scheduler methods

 - Remove unused methods

 - Refine __init tags

 - Documentation updates

 - Misc other cleanups, fixes

* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
  sched/rt: pick_next_rt_entity(): check list_entry
  sched/deadline: Add more reschedule cases to prio_changed_dl()
  sched/fair: sanitize vruntime of entity being placed
  sched/fair: Remove capacity inversion detection
  sched/fair: unlink misfit task from cpu overutilized
  objtool: mem*() are not uaccess safe
  cpuidle: Fix poll_idle() noinstr annotation
  sched/clock: Make local_clock() noinstr
  sched/clock/x86: Mark sched_clock() noinstr
  x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
  x86/atomics: Always inline arch_atomic64*()
  cpuidle: tracing, preempt: Squash _rcuidle tracing
  cpuidle: tracing: Warn about !rcu_is_watching()
  cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
  cpuidle: drivers: firmware: psci: Dont instrument suspend code
  KVM: selftests: Fix build of rseq test
  exit: Detect and fix irq disabled state in oops
  cpuidle, arm64: Fix the ARM64 cpuidle logic
  cpuidle: mvebu: Fix duplicate flags assignment
  sched/fair: Limit sched slice duration
  ...
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2023-02-20T23:28:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-20T23:28:57+00:00 ff0c7e18629b8bd64681313a88ce55e182c9fee6 Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ... 
Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...