linux-toradex.git/drivers/clocksource/em_sti.c, branch v3.11 Linux kernel for Apalis and Colibri modules clocksource: em_sti: Set initcall level to subsys 2013-03-12T17:24:36+00:00 Simon Horman horms+renesas@verge.net.au 2013-03-05T06:40:42+00:00 09acc3a1e0dee537fcfcd5a6c17a1e9b26586066 The reason for this is to ensure that STI is probed earlier than with its previous initcall level, module init. This came up as a problem with using CMT as a clock source kzm9g-reference which does not make use of early timers or devices. In that scenario initialisation of SDHI and MMCIF both stall on msleep() calls due to the absence of a initialised clock source. The purpose of this change is to keep the STI code in sync with the CMT code which has been modified in a similar manner.. Boot tested on: kzm9d. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> 
The reason for this is to ensure that STI is probed earlier
than with its previous initcall level, module init.

This came up as a problem with using CMT as a clock source kzm9g-reference
which does not make use of early timers or devices. In that scenario
initialisation of SDHI and MMCIF both stall on msleep() calls due to the
absence of a initialised clock source.

The purpose of this change is to keep the STI code in sync with the CMT code
which has been modified in a similar manner..

Boot tested on: kzm9d.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Drivers: clocksource: remove __dev* attributes. 2013-01-03T23:57:15+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-12-21T23:11:38+00:00 1850514b3ebde0f5eeedbe918a7d0d344b752653 CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clocksource: em_sti: Add DT support 2012-05-25T09:32:06+00:00 Magnus Damm magnus.damm@gmail.com 2012-05-09T14:39:50+00:00 fc0830fe017d02b7b4995b5c402b484b65d9dfc6 Update the em-sti driver to support DT. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: arnd@arndb.de Cc: horms@verge.net.au Cc: johnstul@us.ibm.com Cc: rjw@sisk.pl Cc: lethal@linux-sh.org Cc: gregkh@linuxfoundation.org Cc: olof@lixom.net Link: http://lkml.kernel.org/r/20120509143950.27521.7949.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 
Update the em-sti driver to support DT.

Signed-off-by: Magnus Damm <damm@opensource.se>
Cc: arnd@arndb.de
Cc: horms@verge.net.au
Cc: johnstul@us.ibm.com
Cc: rjw@sisk.pl
Cc: lethal@linux-sh.org
Cc: gregkh@linuxfoundation.org
Cc: olof@lixom.net
Link: http://lkml.kernel.org/r/20120509143950.27521.7949.sendpatchset@w520
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
clocksource: em_sti: Emma Mobile STI driver 2012-05-25T09:32:06+00:00 Magnus Damm magnus.damm@gmail.com 2012-05-25T07:03:44+00:00 b9dbf9517784084ee9496f9f17f9754c1d021a9e The STI hardware is based on a single 48-bit 32kHz counter that together with two individual compare registers can generate interrupts. There are no timer operating modes selectable which means that the timer can not clear on match. This driver is providing clocksource support for the 48-bit counter. Clockevents are also supported using the same timer in oneshot mode. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: horms@verge.net.au Cc: arnd@arndb.de Cc: johnstul@us.ibm.com Cc: rjw@sisk.pl Cc: lethal@linux-sh.org Cc: gregkh@linuxfoundation.org Cc: olof@lixom.net Link: http://lkml.kernel.org/r/20120525070344.23443.69756.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 
The STI hardware is based on a single 48-bit 32kHz
counter that together with two individual compare
registers can generate interrupts. There are no
timer operating modes selectable which means that
the timer can not clear on match.

This driver is providing clocksource support for the
48-bit counter. Clockevents are also supported using
the same timer in oneshot mode.

Signed-off-by: Magnus Damm <damm@opensource.se>
Cc: horms@verge.net.au
Cc: arnd@arndb.de
Cc: johnstul@us.ibm.com
Cc: rjw@sisk.pl
Cc: lethal@linux-sh.org
Cc: gregkh@linuxfoundation.org
Cc: olof@lixom.net
Link: http://lkml.kernel.org/r/20120525070344.23443.69756.sendpatchset@w520
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>