linux-toradex.git/drivers/clocksource, branch v3.14.11

clocksource: Exynos_mct: Register clock event after request_irq()

2014-06-07T17:28:08+00:00

commit 8db6e5104b77de5d0b7002b95069da0992a34be9 upstream.

After hotplugging CPU1 the first call of interrupt handler for CPU1
oneshot timer was called on CPU0 because it fired before setting IRQ
affinity. Affected are SoCs where Multi Core Timer interrupts are
shared (SPI), e.g. Exynos 4210.

During setup of the MCT timers the clock event device should be
registered after setting the affinity for interrupt. This will prevent
starting the timer too early.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Thomas Gleixner 
Cc: Kyungmin Park 
Cc: Marek Szyprowski 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Tomasz Figa ,
Cc: Daniel Lezcano ,
Cc: Kukjin Kim 
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143316.299247848@linutronix.de
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup

2014-06-07T17:28:08+00:00

commit 30ccf03b4a6a2102a2219058bdc6d779dc637dd7 upstream.

The starting cpu is not yet in the online mask so irq_set_affinity()
fails which results in per cpu timers for this cpu ending up on some
other online cpu, ususally cpu 0.

Use irq_force_affinity() which disables the online mask check and
makes things work.

Signed-off-by: Thomas Gleixner 
Tested-by: Krzysztof Kozlowski 
Cc: Kyungmin Park 
Cc: Marek Szyprowski 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Tomasz Figa ,
Cc: Daniel Lezcano ,
Cc: Kukjin Kim 
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143316.106665251@linutronix.de
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

clocksource: vf_pit_timer: use complement for sched_clock reading

2014-03-06T10:34:14+00:00

Vybrids PIT register is monitonic decreasing. However, sched_clock
reading needs to be monitonic increasing. Use bitwise not to get
the complement of the clock register. This fixes the clock going
backward. Also, the clock now starts at 0 since we load the
register with the maximum value at start.

Signed-off-by: Stefan Agner 
Acked-by: Shawn Guo 
Cc: daniel.lezcano@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Link: http://lkml.kernel.org/r/d25af915993aec1b486be653eb86f748ddef54fe.1394057313.git.stefan@agner.ch
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner

clocksource: Kona: Print warning rather than panic

2014-02-06T15:01:40+00:00

Since there may be other clocksources available, this driver should not
trigger a panic simply because it can not determine the frequency of an
external clock.  This change refactors the driver to allow a warning to
be printed in this case instead.

Signed-off-by: Tim Kryger 
Reviewed-by: Markus Mayer 
Reviewed-by: Matt Porter 
Cc: Christian Daudt 
Cc: Daniel Lezcano 
Link: http://lkml.kernel.org/r/1391559304-26558-1-git-send-email-tim.kryger@linaro.org
Signed-off-by: Thomas Gleixner

clocksource: kona: Add basic use of external clock

2014-02-01T05:04:01+00:00

When an clock is specified in the device tree, enable it and use it to
determine the external clock frequency.

Signed-off-by: Tim Kryger 
Reviewed-by: Markus Mayer 
Reviewed-by: Matt Porter 
Reviewed-by: Christian Daudt 
Acked-by: Daniel Lezcano 
Signed-off-by: Christian Daudt 
Signed-off-by: Olof Johansson

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-01-24T02:45:38+00:00

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-01-24T02:40:49+00:00

Pull ARM SoC platform changes from Olof Johansson:
"New core SoC-specific changes.

New platforms:
* Introduction of a vendor, Hisilicon, and one of their SoCs with
some random numerical product name.
* Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m,
i.e. !MMU).
* Marvell Berlin series of SoCs, which include the one in Chromecast.
* MOXA platform support, ARM9-based platform used mostly in
industrial products
* Support for Freescale's i.MX50 SoC.

Other work:
* Renesas work for new platforms and drivers, and conversion over to
more multiplatform-friendly device registration schemes.
* SMP support for Allwinner sunxi platforms.
* ... plus a bunch of other stuff across various platforms"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits)
ARM: tegra: fix tegra_powergate_sequence_power_up() inline
ARM: msm_defconfig: Update for multi-platform
ARM: msm: Move MSM's DT based hardware to multi-platform support
ARM: msm: Only build timer.c if required
ARM: msm: Only build clock.c on proc_comm based platforms
ARM: ux500: Enable system suspend with WFI support
ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
ARM: shmobile: r8a7790: Fix I2C controller names
ARM: msm: Simplify ARCH_MSM_DT config
ARM: msm: Add support for MSM8974 SoC
ARM: sunxi: select ARM_PSCI
MAINTAINERS: Update Allwinner sunXi maintainer files
ARM: sunxi: Select RESET_CONTROLLER
ARM: imx: improve the comment of CCM lpm SW workaround
ARM: imx: improve status check of clock gate
ARM: imx: add necessary interface for pfd
ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
ARM: imx: Add cpu frequency scaling support
ARM i.MX35: Add devicetree support.
...

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-01-20T19:34:26+00:00

Pull timer changes from Ingo Molnar:
  - ARM clocksource/clockevent improvements and fixes
  - generic timekeeping updates: TAI fixes/improvements, cleanups
  - Posix cpu timer cleanups and improvements
  - dynticks updates: full dynticks bugfixes, optimizations and cleanups

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  clocksource: Timer-sun5i: Switch to sched_clock_register()
  timekeeping: Remove comment that's mostly out of date
  rtc-cmos: Add an alarm disable quirk
  timekeeper: fix comment typo for tk_setup_internals()
  timekeeping: Fix missing timekeeping_update in suspend path
  timekeeping: Fix CLOCK_TAI timer/nanosleep delays
  tick/timekeeping: Call update_wall_time outside the jiffies lock
  timekeeping: Avoid possible deadlock from clock_was_set_delayed
  timekeeping: Fix potential lost pv notification of time change
  timekeeping: Fix lost updates to tai adjustment
  clocksource: sh_cmt: Add clk_prepare/unprepare support
  clocksource: bcm_kona_timer: Remove unused bcm_timer_ids
  clocksource: vt8500: Remove deprecated IRQF_DISABLED
  clocksource: tegra: Remove deprecated IRQF_DISABLED
  clocksource: misc drivers: Remove deprecated IRQF_DISABLED
  clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()
  clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()
  clocksource: armada-370-xp: Enable timer divider only when needed
  clocksource: clksrc-of: Warn if no clock sources are found
  clocksource: orion: Switch to sched_clock_register()
  ...

clocksource: Timer-sun5i: Switch to sched_clock_register()

2014-01-19T12:23:23+00:00

The 32-bit sched_clock() interface supports 64 bits since
3.13-rc1. Upgrade to the 64-bit function to allow us to remove
the 32-bit registration interface.

Signed-off-by: Stephen Boyd 
Acked-by: Daniel Lezcano 
Cc: Maxime Ripard 
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1389922686-6249-1-git-send-email-sboyd@codeaurora.org
Signed-off-by: Ingo Molnar

Merge branch 'clockevents/3.14' of git://git.linaro.org/people/daniel.lezcano/linux into timers/core

2014-01-14T13:33:29+00:00

Pull clocksource/clockevent updates from Daniel Lezcano:

  * Axel Lin removed an unused structure defining the ids for the
    bcm kona driver.

  * Ezequiel Garcia enabled the timer divider only when the 25MHz
    timer is not used for the armada 370 XP.

  * Jingoo Han removed a pointless platform data initialization for
    the sh_mtu and sh_mtu2.

  * Laurent Pinchart added the clk_prepare/clk_unprepare for sh_cmt.

  * Linus Walleij added a useful warning in clk_of when no clocks
    are found while the old behavior was to silently hang at boot time.

  * Maxime Ripard added the high speed timer drivers for the
    Allwinner SoCs (A10, A13, A20). He increased the rating, shared the
    irq across all available cpus and fixed the clockevent's irq
    initialization for the sun4i.

  * Michael Opdenacker removed the usage of the IRQF_DISABLED for the
    all the timers driver located in drivers/clocksource.

  * Stephen Boyd switched to sched_clock_register for the
    arm_global_timer, cadence_ttc, sun4i and orion timers.

Conflicts:
	drivers/clocksource/clksrc-of.c

Signed-off-by: Ingo Molnar