linux-toradex.git/drivers/cpufreq/Kconfig.arm, branch v5.13 Linux kernel for Apalis and Colibri modules Revert "cpufreq: CPPC: Add support for frequency invariance" 2021-06-14T13:55:02+00:00 Viresh Kumar viresh.kumar@linaro.org 2021-06-11T03:18:02+00:00 771fac5e26c17845de8c679e6a947a4371e86ffc This reverts commit 4c38f2df71c8e33c0b64865992d693f5022eeaad. There are few races in the frequency invariance support for CPPC driver, namely the driver doesn't stop the kthread_work and irq_work on policy exit during suspend/resume or CPU hotplug. A proper fix won't be possible for the 5.13-rc, as it requires a lot of changes. Lets revert the patch instead for now. Fixes: 4c38f2df71c8 ("cpufreq: CPPC: Add support for frequency invariance") Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
This reverts commit 4c38f2df71c8e33c0b64865992d693f5022eeaad.

There are few races in the frequency invariance support for CPPC driver,
namely the driver doesn't stop the kthread_work and irq_work on policy
exit during suspend/resume or CPU hotplug.

A proper fix won't be possible for the 5.13-rc, as it requires a lot of
changes. Lets revert the patch instead for now.

Fixes: 4c38f2df71c8 ("cpufreq: CPPC: Add support for frequency invariance")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: CPPC: Add support for frequency invariance 2021-03-22T03:25:28+00:00 Viresh Kumar viresh.kumar@linaro.org 2020-06-23T10:19:40+00:00 4c38f2df71c8e33c0b64865992d693f5022eeaad The Frequency Invariance Engine (FIE) is providing a frequency scaling correction factor that helps achieve more accurate load-tracking. Normally, this scaling factor can be obtained directly with the help of the cpufreq drivers as they know the exact frequency the hardware is running at. But that isn't the case for CPPC cpufreq driver. Another way of obtaining that is using the arch specific counter support, which is already present in kernel, but that hardware is optional for platforms. This patch updates the CPPC driver to register itself with the topology core to provide its own implementation (cppc_scale_freq_tick()) of topology_scale_freq_tick() which gets called by the scheduler on every tick. Note that the arch specific counters have higher priority than CPPC counters, if available, though the CPPC driver doesn't need to have any special handling for that. On an invocation of cppc_scale_freq_tick(), we schedule an irq work (since we reach here from hard-irq context), which then schedules a normal work item and cppc_scale_freq_workfn() updates the per_cpu arch_freq_scale variable based on the counter updates since the last tick. To allow platforms to disable this CPPC counter-based frequency invariance support, this is all done under CONFIG_ACPI_CPPC_CPUFREQ_FIE, which is enabled by default. This also exports sched_setattr_nocheck() as the CPPC driver can be built as a module. Cc: linux-acpi@vger.kernel.org Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 
The Frequency Invariance Engine (FIE) is providing a frequency scaling
correction factor that helps achieve more accurate load-tracking.

Normally, this scaling factor can be obtained directly with the help of
the cpufreq drivers as they know the exact frequency the hardware is
running at. But that isn't the case for CPPC cpufreq driver.

Another way of obtaining that is using the arch specific counter
support, which is already present in kernel, but that hardware is
optional for platforms.

This patch updates the CPPC driver to register itself with the topology
core to provide its own implementation (cppc_scale_freq_tick()) of
topology_scale_freq_tick() which gets called by the scheduler on every
tick. Note that the arch specific counters have higher priority than
CPPC counters, if available, though the CPPC driver doesn't need to have
any special handling for that.

On an invocation of cppc_scale_freq_tick(), we schedule an irq work
(since we reach here from hard-irq context), which then schedules a
normal work item and cppc_scale_freq_workfn() updates the per_cpu
arch_freq_scale variable based on the counter updates since the last
tick.

To allow platforms to disable this CPPC counter-based frequency
invariance support, this is all done under CONFIG_ACPI_CPPC_CPUFREQ_FIE,
which is enabled by default.

This also exports sched_setattr_nocheck() as the CPPC driver can be
built as a module.

Cc: linux-acpi@vger.kernel.org
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq: remove tango driver 2021-01-21T04:04:46+00:00 Arnd Bergmann arnd@arndb.de 2021-01-20T13:16:44+00:00 7114ebffd330bfc5a95b9832a70b6bd857d26fd8 The tango platform is getting removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> [ Viresh: Update cpufreq-dt-platdev.c as well ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 
The tango platform is getting removed, so the driver is no
longer needed.

Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: Update cpufreq-dt-platdev.c as well ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq: imx: fix NVMEM_IMX_OCOTP dependency 2020-12-07T07:32:38+00:00 Arnd Bergmann arnd@arndb.de 2020-12-03T22:53:32+00:00 fc928b901dc68481ba3e524860a641fe13e25dfe A driver should not 'select' drivers from another subsystem. If NVMEM is disabled, this one results in a warning: WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] Selected by [y]: - ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y] Change the 'select' to 'depends on' to prevent it from going wrong, and allow compile-testing without that driver, since it is only a runtime dependency. Fixes: 2782ef34ed23 ("cpufreq: imx: Select NVMEM_IMX_OCOTP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 
A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:

WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
  Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
  Selected by [y]:
  - ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]

Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.

Fixes: 2782ef34ed23 ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2020-10-24T17:33:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-24T17:33:08+00:00 e731f3146ff3bba5424b40140e1a7e6f92e94964 Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ... 
Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...
cpufreq: arm: Kconfig: add CPUFREQ_DT depend for STI CPUFREQ 2020-09-16T08:42:18+00:00 Alain Volmat avolmat@me.com 2020-08-31T06:10:13+00:00 a0d698d8c21aaa71b2a2fc6c938d658797e31911 The sti cpufreq driver is relying on the CPUFREQ_DT driver hence add the depends within the Kconfig.arm Signed-off-by: Alain Volmat <avolmat@me.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 
The sti cpufreq driver is relying on the CPUFREQ_DT driver
hence add the depends within the Kconfig.arm

Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq: s3c24xx: move low-level clk reg access into platform code 2020-08-20T15:53:22+00:00 Arnd Bergmann arnd@arndb.de 2020-08-06T18:20:54+00:00 c38758e3d574380ccfa583793be14c1cc8a322ff Rather than have the cpufreq drivers touch include the common headers to get the constants, add a small indirection. This is still not the proper way that would do this through the common clk API, but it lets us kill off the header file usage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20200806182059.2431-37-krzk@kernel.org [krzk: Rebase and fix -Wold-style-definition] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> 
Rather than have the cpufreq drivers touch include the
common headers to get the constants, add a small indirection.
This is still not the proper way that would do this through
the common clk API, but it lets us kill off the header file
usage.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-37-krzk@kernel.org
[krzk: Rebase and fix -Wold-style-definition]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
cpufreq: Add Tegra194 cpufreq driver 2020-07-30T05:27:51+00:00 Sumit Gupta sumitg@nvidia.com 2020-07-16T08:30:01+00:00 df320f89359c0cc22ff552da3ffd07171f7754a6 Add support for CPU frequency scaling on Tegra194. The frequency of each core can be adjusted by writing a clock divisor value to a MSR on the core. The range of valid divisors is queried from the BPMP. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 
Add support for CPU frequency scaling on Tegra194. The frequency
of each core can be adjusted by writing a clock divisor value to
a MSR on the core. The range of valid divisors is queried from
the BPMP.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq: imx: Select NVMEM_IMX_OCOTP 2020-07-30T05:27:50+00:00 Walter Lozano walter.lozano@collabora.com 2020-07-14T18:43:56+00:00 2782ef34ed230e1b8dbea9ad46e5fc2ca6cfecfb When probing cpufreq for iMX6 the values in the efuse needs to be read which requires NVMEM_IMX_OCOTP. If this option is not enabled, the probe will be deferred forever and cpufreq won't be available. This patch forces the selection of the required configuration option. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 
When probing cpufreq for iMX6 the values in the efuse needs to be
read which requires NVMEM_IMX_OCOTP. If this option is not enabled,
the probe will be deferred forever and cpufreq won't be available.

This patch forces the selection of the required configuration option.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq: ap806: fix cpufreq driver needs ap cpu clk 2020-07-30T05:27:46+00:00 Sven Auhagen sven.auhagen@voleatech.de 2020-06-22T12:01:23+00:00 8c37ad2f523396e15cf002b29f8f796447c71932 The Armada 8K cpufreq driver needs the Armada AP CPU CLK to work. This dependency is currently not satisfied and the ARMADA_AP_CPU_CLK can not be selected independently. Add it to the cpufreq Armada8k driver. Fixes: f525a670533d ("cpufreq: ap806: add cpufreq driver for Armada 8K") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 
The Armada 8K cpufreq driver needs the Armada AP CPU CLK
to work. This dependency is currently not satisfied and
the ARMADA_AP_CPU_CLK can not be selected independently.

Add it to the cpufreq Armada8k driver.

Fixes: f525a670533d ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>