linux-toradex.git/drivers/cpufreq/ppc_cbe_cpufreq.c, branch v5.8-rc2

cpufreq: powerpc_cbe: Switch to QoS requests for freq limits

2019-08-26T08:02:01+00:00

The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.

Switch over to using the QoS request for maximum frequency constraint
for ppc_cbe_cpufreq driver.

Signed-off-by: Viresh Kumar 
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version this program is distributed in the hope that it will
  be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details you should have received a
  copy of the gnu general public license along with this program if
  not write to the free software foundation inc 675 mass ave cambridge
  ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 77 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Armijn Hemel 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.837555891@linutronix.de
Signed-off-by: Greg Kroah-Hartman

cpufreq: ppc_cbe: fix possible object reference leak

2019-04-08T10:07:30+00:00

The call to of_get_cpu_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.

Signed-off-by: Wen Yang 
Cc: "Rafael J. Wysocki" 
Cc: Viresh Kumar 
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar

cpufreq: ppc_cbe: Don't validate the frequency table twice

2018-03-20T11:07:52+00:00

The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from ppc_cbe driver.

Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki

cpufreq: Use cpufreq_for_each_* macros for frequency table iteration

2014-04-29T22:06:21+00:00

The cpufreq core now supports the cpufreq_for_each_entry and
cpufreq_for_each_valid_entry macros helpers for iteration over the
cpufreq_frequency_table, so use them.

It should have no functional changes.

Signed-off-by: Stratos Karafotis 
Acked-by: Lad, Prabhakar 
Acked-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki

cpufreq: create another field .flags in cpufreq_frequency_table

2014-04-07T12:43:50+00:00

Currently cpufreq frequency table has two fields: frequency and driver_data.
driver_data is only for drivers' internal use and cpufreq core shouldn't use
it at all. But with the introduction of BOOST frequencies, this assumption
was broken and we started using it as a flag instead.

There are two problems due to this:
- It is against the description of this field, as driver's data is used by
  the core now.
- if drivers fill it with -3 for any frequency, then those frequencies are
  never considered by cpufreq core as it is exactly same as value of
  CPUFREQ_BOOST_FREQ, i.e. ~2.

The best way to get this fixed is by creating another field flags which
will be used for such flags. This patch does that. Along with that various
drivers need modifications due to the change of struct cpufreq_frequency_table.

Reviewed-by: Gautham R Shenoy 
Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki

cpufreq: Remove cpufreq_generic_exit()

2014-03-12T00:06:00+00:00

cpufreq_generic_exit() is empty now and can be deleted.

Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki

cpufreq: move freq change notifications to cpufreq core

2013-10-30T23:11:08+00:00

Most of the drivers do following in their ->target_index() routines:

	struct cpufreq_freqs freqs;
	freqs.old = old freq...
	freqs.new = new freq...

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

	/* Change rate here */

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.

There are few special cases though, like exynos5440, which doesn't do everything
on the call to ->target_index() routine and call some kind of bottom halves for
doing this work, work/tasklet/etc..

They may continue doing notification from their own code as flag:
CPUFREQ_ASYNC_NOTIFICATION is already set for them.

All drivers are also modified in this patch to avoid breaking 'git bisect', as
double notification would happen otherwise.

Acked-by: Hans-Christian Egtvedt 
Acked-by: Jesper Nilsson 
Acked-by: Linus Walleij 
Acked-by: Russell King 
Acked-by: Stephen Warren 
Tested-by: Andrew Lunn 
Tested-by: Nicolas Pitre 
Reviewed-by: Lan Tianyu 
Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki

cpufreq: Implement light weight ->target_index() routine

2013-10-25T20:42:24+00:00

Currently, the prototype of cpufreq_drivers target routines is:

int target(struct cpufreq_policy *policy, unsigned int target_freq,
		unsigned int relation);

And most of the drivers call cpufreq_frequency_table_target() to get a valid
index of their frequency table which is closest to the target_freq. And they
don't use target_freq and relation after that.

So, it makes sense to just do this work in cpufreq core before calling
cpufreq_frequency_table_target() and simply pass index instead. But this can be
done only with drivers which expose their frequency table with cpufreq core. For
others we need to stick with the old prototype of target() until those drivers
are converted to expose frequency tables.

This patch implements the new light weight prototype for target_index() routine.
It looks like this:

int target_index(struct cpufreq_policy *policy, unsigned int index);

CPUFreq core will call cpufreq_frequency_table_target() before calling this
routine and pass index to it. Because CPUFreq core now requires to call routines
present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time.

This also marks target() interface as deprecated. So, that new drivers avoid
using it. And Documentation is updated accordingly.

It also converts existing .target() to newly defined light weight
.target_index() routine for many driver.

Acked-by: Hans-Christian Egtvedt 
Acked-by: Jesper Nilsson 
Acked-by: Linus Walleij 
Acked-by: Russell King 
Acked-by: David S. Miller 
Tested-by: Andrew Lunn 
Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki

cpufreq: ppc_cbe: Use generic cpufreq routines

2013-10-15T22:50:27+00:00

Most of the CPUFreq drivers do similar things in .exit() and .verify() routines
and .attr. So its better if we have generic routines for them which can be used
by cpufreq drivers then.

This patch uses these generic routines in the ppc_cbe driver.

Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki