* pm-cpuidle: cpuidle: coupled: remove unused define cpuidle_coupled_lock cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze * pm-cpufreq: cpufreq: cpufreq-dt: avoid uninitialized variable warnings: cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype cpufreq: Use list_is_last() to check last entry of the policy list cpufreq: Fix NULL reference crash while accessing policy->governor_data * pm-domains: PM / Domains: Fix typo in comment PM / Domains: Fix potential deadlock while adding/removing subdomains PM / domains: fix lockdep issue for all subdomains * pm-sleep: PM: APM_EMULATION does not depend on PM
gcc warns quite a bit about values returned from allocate_resources() in cpufreq-dt.c: cpufreq-dt.c: In function 'cpufreq_init': cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here cpufreq-dt.c: In function 'dt_cpufreq_probe': cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here The problem is that it's slightly hard for gcc to follow return codes across PTR_ERR() calls. This patch uses explicit assignments to the "ret" variable to make it easier for gcc to verify that the code is actually correct, without the need to add a bogus initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two definitions of pxa_cpufreq_change_voltage, with slightly
different prototypes after one of them had its argument marked 'const'.
Now the other one (for !CONFIG_REGULATOR) produces a harmless warning:
drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target':
drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
^
drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *'
static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq)
^
This changes the prototype in the same way as the other, which
avoids the warning.
Fixes: 03c229906311 (cpufreq: pxa: make pxa_freqs arrays const)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.2+ <stable@vger.kernel.org> # 4.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently next_policy() explicitly checks if a policy is the last policy in the cpufreq_policy_list. Use the standard list_is_last primitive instead. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a race discovered by Juri, where we are able to: - create and read a sysfs file before policy->governor_data is being set to a non NULL value. OR - set policy->governor_data to NULL, and reading a file before being destroyed. And so such a crash is reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = edfc8000 [0000000c] *pgd=bfc8c835 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 4 PID: 1730 Comm: cat Not tainted 4.5.0-rc1+ #463 Hardware name: ARM-Versatile Express task: ee8e8480 ti: ee930000 task.ti: ee930000 PC is at show_ignore_nice_load_gov_pol+0x24/0x34 LR is at show+0x4c/0x60 pc : [<c058f1bc>] lr : [<c058ae88>] psr: a0070013 sp : ee931dd0 ip : ee931de0 fp : ee931ddc r10: ee4bc290 r9 : 00001000 r8 : ef2cb000 r7 : ee4bc200 r6 : ef2cb000 r5 : c0af57b0 r4 : ee4bc2e0 r3 : 00000000 r2 : 00000000 r1 : c0928df4 r0 : ef2cb000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: adfc806a DAC: 00000051 Process cat (pid: 1730, stack limit = 0xee930210) Stack: (0xee931dd0 to 0xee932000) 1dc0: ee931dfc ee931de0 c058ae88 c058f1a4 1de0: edce3bc0 c07bfca4 edce3ac0 00001000 ee931e24 ee931e00 c01fcb90 c058ae48 1e00: 00000001 edce3bc0 00000000 00000001 ee931e50 ee8ff480 ee931e34 ee931e28 1e20: c01fb33c c01fcb0c ee931e8c ee931e38 c01a5210 c01fb314 ee931e9c ee931e48 1e40: 00000000 edce3bf0 befe4a00 ee931f78 00000000 00000000 000001e4 00000000 1e60: c00545a8 edce3ac0 00001000 00001000 befe4a00 ee931f78 00000000 00001000 1e80: ee931ed4 ee931e90 c01fbed8 c01a5038 ed085a58 00020000 00000000 00000000 1ea0: c0ad72e4 ee931f78 ee8ff488 ee8ff480 c077f3fc 00001000 befe4a00 ee931f78 1ec0: 00000000 00001000 ee931f44 ee931ed8 c017c328 c01fbdc4 00001000 00000000 1ee0: ee8ff480 00001000 ee931f44 ee931ef8 c017c65c c03deb10 ee931fac ee931f08 1f00: c0009270 c001f290 c0a8d968 ef2cb000 ef2cb000 ee8ff480 00000020 ee8ff480 1f20: ee8ff480 befe4a00 00001000 ee931f78 00000000 00000000 ee931f74 ee931f48 1f40: c017d1ec c017c2f8 c019c724 c019c684 ee8ff480 ee8ff480 00001000 befe4a00 1f60: 00000000 00000000 ee931fa4 ee931f78 c017d2a8 c017d160 00000000 00000000 1f80: 000a9f20 00001000 befe4a00 00000003 c000ffe4 ee930000 00000000 ee931fa8 1fa0: c000fe40 c017d264 000a9f20 00001000 00000003 befe4a00 00001000 00000000 Unable to handle kernel NULL pointer dereference at virtual address 0000000c 1fc0: 000a9f20 00001000 befe4a00 00000003 00000000 00000000 00000003 00000001 pgd = edfc4000 [0000000c] *pgd=bfcac835 1fe0: 00000000 befe49dc 000197f8 b6e35dfc 60070010 00000003 3065b49d 134ac2c9 [<c058f1bc>] (show_ignore_nice_load_gov_pol) from [<c058ae88>] (show+0x4c/0x60) [<c058ae88>] (show) from [<c01fcb90>] (sysfs_kf_seq_show+0x90/0xfc) [<c01fcb90>] (sysfs_kf_seq_show) from [<c01fb33c>] (kernfs_seq_show+0x34/0x38) [<c01fb33c>] (kernfs_seq_show) from [<c01a5210>] (seq_read+0x1e4/0x4e4) [<c01a5210>] (seq_read) from [<c01fbed8>] (kernfs_fop_read+0x120/0x1a0) [<c01fbed8>] (kernfs_fop_read) from [<c017c328>] (__vfs_read+0x3c/0xe0) [<c017c328>] (__vfs_read) from [<c017d1ec>] (vfs_read+0x98/0x104) [<c017d1ec>] (vfs_read) from [<c017d2a8>] (SyS_read+0x50/0x90) [<c017d2a8>] (SyS_read) from [<c000fe40>] (ret_fast_syscall+0x0/0x1c) Code: e5903044 e1a00001 e3081df4 e34c1092 (e593300c) ---[ end trace 5994b9a5111f35ee ]--- Fix that by making sure, policy->governor_data is updated at the right places only. Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Reported-and-tested-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull powerpc updates from Michael Ellerman:
"Core:
- Ground work for the new Power9 MMU from Aneesh Kumar K.V
- Optimise FP/VMX/VSX context switching from Anton Blanchard
Misc:
- Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica
Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling,
Andrew Donnellan
- Allow wrapper to work on non-english system from Laurent Vivier
- Add rN aliases to the pt_regs_offset table from Rashmica Gupta
- Fix module autoload for rackmeter & axonram drivers from Luis de
Bethencourt
- Include KVM guest test in all interrupt vectors from Paul Mackerras
- Fix DSCR inheritance over fork() from Anton Blanchard
- Make value-returning atomics & {cmp}xchg* & their atomic_ versions
fully ordered from Boqun Feng
- Print MSR TM bits in oops messages from Michael Neuling
- Add TM signal return & invalid stack selftests from Michael Neuling
- Limit EPOW reset event warnings from Vipin K Parashar
- Remove the Cell QPACE code from Rashmica Gupta
- Append linux_banner to exception information in xmon from Rashmica
Gupta
- Add selftest to check if VSRs are corrupted from Rashmica Gupta
- Remove broken GregorianDay() from Daniel Axtens
- Import Anton's context_switch2 benchmark into selftests from
Michael Ellerman
- Add selftest script to test HMI functionality from Daniel Axtens
- Remove obsolete OPAL v2 support from Stewart Smith
- Make enter_rtas() private from Michael Ellerman
- PPR exception cleanups from Michael Ellerman
- Add page soft dirty tracking from Laurent Dufour
- Add support for Nvlink NPUs from Alistair Popple
- Add support for kexec on 476fpe from Alistair Popple
- Enable kernel CPU dlpar from sysfs from Nathan Fontenot
- Copy only required pieces of the mm_context_t to the paca from
Michael Neuling
- Add a kmsg_dumper that flushes OPAL console output on panic from
Russell Currey
- Implement save_stack_trace_regs() to enable kprobe stack tracing
from Steven Rostedt
- Add HWCAP bits for Power9 from Michael Ellerman
- Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
- Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
- scripts/recordmcount.pl: support data in text section on powerpc
from Ulrich Weigand
- Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand
cxl:
- cxl: Fix possible idr warning when contexts are released from
Vaibhav Jain
- cxl: use correct operator when writing pcie config space values
from Andrew Donnellan
- cxl: Fix DSI misses when the context owning task exits from Vaibhav
Jain
- cxl: fix build for GCC 4.6.x from Brian Norris
- cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
- cxl: Enable PCI device ID for future IBM CXL adapter from Uma
Krishnan
Freescale:
- Freescale updates from Scott: Highlights include moving QE code out
of arch/powerpc (to be shared with arm), device tree updates, and
minor fixes"
* tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits)
powerpc/module: Handle R_PPC64_ENTRY relocations
scripts/recordmcount.pl: support data in text section on powerpc
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff
powerpc/mm: Fix _PAGE_PTE breaking swapoff
cxl: Enable PCI device ID for future IBM CXL adapter
cxl: use -Werror only with CONFIG_PPC_WERROR
cxl: fix build for GCC 4.6.x
powerpc: Add HWCAP bits for Power9
powerpc/powernv: Reserve PE#0 on NPU
powerpc/powernv: Change NPU PE# assignment
powerpc/powernv: Fix update of NVLink DMA mask
powerpc/powernv: Remove misleading comment in pci.c
powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing
powerpc: Fix build break due to paca mm_context_t changes
cxl: Fix DSI misses when the context owning task exits
MAINTAINERS: Update Scott Wood's e-mail address
powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery()
powerpc: Fix style of self-test config prompts
powerpc/powernv: Only delay opal_rtc_read() retry when necessary
...
The function can return negative values so it should be assigned to signed type. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci. Link: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that, with CONFIG_HZ_PERIODIC=y cpu stays at the lowest frequency even if the usage goes to 100%, neither ondemand nor conservative governor works, however performance and userspace work as expected. If set with CONFIG_NO_HZ_FULL=y, everything goes well. This problem is caused by improper calculation of the idle_time when the load is extremely high(near 100%). Firstly, cpufreq_governor uses get_cpu_idle_time to get the total idle time for specific cpu, then: 1.If the system is configured with CONFIG_NO_HZ_FULL, the idle time is returned by ktime_get, which is always increasing, it's OK. 2.However, if the system is configured with CONFIG_HZ_PERIODIC, get_cpu_idle_time might not guarantee to be always increasing, because it will leverage get_cpu_idle_time_jiffy to calculate the idle_time, consider the following scenario: At T1: idle_tick_1 = total_tick_1 - user_tick_1 sample period(80ms)... At T2: ( T2 = T1 + 80ms): idle_tick_2 = total_tick_2 - user_tick_2 Currently the algorithm is using (idle_tick_2 - idle_tick_1) to get the delta idle_time during the past sample period, however it CAN NOT guarantee that idle_tick_2 >= idle_tick_1, especially when cpu load is high. (Yes, total_tick_2 >= total_tick_1, and user_tick_2 >= user_tick_1, but how about idle_tick_2 and idle_tick_1? No guarantee.) So governor might get a negative value of idle_time during the past sample period, which might mislead the system that the idle time is very big(converted to unsigned int), and the busy time is nearly zero, which causes the governor to always choose the lowest cpufreq, then cause this problem. In theory there are two solutions: 1.The logic should not rely on the idle tick during every sample period, but be based on the busy tick directly, as this is how 'top' is implemented. 2.Or the logic must make sure that the idle_time is strictly increasing during each sample period, then there would be no negative idle_time anymore. This solution requires minimum modification to current code and this patch uses method 2. Link: https://bugzilla.kernel.org/show_bug.cgi?id=69821 Reported-by: Jan Fikar <j.fikar@gmail.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify mt8173-cpufreq driver to get OPP-sharing information and set up OPP table provided by operating-points-v2 bindings. Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that the boost_supported field in struct cpufreq_driver is redundant, because the driver's ->set_boost callback may be left unset if "boost" is not supported. Moreover, the only driver populating the ->set_boost callback is acpi_cpufreq, so make it avoid populating that callback if "boost" is not supported, rework the core to check ->set_boost instead of boost_supported to verify "boost" support and drop boost_supported which isn't used any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>