This driver will be able to manage the cpuidle for more SoCs than just
Armada 370 and XP. It will also support Armada 38x and potentially
other SoC of the Marvell Armada EBU family. To take this into account,
this patch renames the driver and its symbols.

It also changes the driver name from cpuidle-armada-370-xp to
cpuidle-armada-xp, because separate platform drivers will be
registered for the other SoC types. This change must be done
simultaneously in the cpuidle driver and in the PMSU code in order to
remain bisectable.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/1406120453-29291-12-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Pull MIPS updates from Ralf Baechle:
 - three fixes for 3.15 that didn't make it in time
 - limited Octeon 3 support.
 - paravirtualization support
 - improvment to platform support for Netlogix SOCs.
 - add support for powering down the Malta eval board in software
 - add many instructions to the in-kernel microassembler.
 - add support for the BPF JIT.
 - minor cleanups of the BCM47xx code.
 - large cleanup of math emu code resulting in significant code size
   reduction, better readability of the code and more accurate
   emulation.
 - improvments to the MIPS CPS code.
 - support C3 power status for the R4k count/compare clock device.
 - improvments to the GIO support for older SGI workstations.
 - increase number of supported CPUs to 256; this can be reached on
   certain embedded multithreaded ccNUMA configurations.
 - various small cleanups, updates and fixes

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits)
  MIPS: IP22/IP28: Improve GIO support
  MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX
  DEC: Document the R4k MB ASIC mini interrupt controller
  DEC: Add self as the maintainer
  MIPS: Add microMIPS MSA support.
  MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents.
  MIPS: Replace obsolete strict_strto call with kstrto
  MIPS: BFP: Simplify code slightly.
  MIPS: Call find_vma with the mmap_sem held
  MIPS: Fix 'write_msa_##' inline macro.
  MIPS: Fix MSA toolchain support detection.
  mips: Update the email address of Geert Uytterhoeven
  MIPS: Add minimal defconfig for mips_paravirt
  MIPS: Enable build for new system 'paravirt'
  MIPS: paravirt: Add pci controller for virtio
  MIPS: Add code for new system 'paravirt'
  MIPS: Add functions for hypervisor call
  MIPS: OCTEON: Add OCTEON3 to __get_cpu_type
  MIPS: Add function get_ebase_cpunum
  MIPS: Add minimal support for OCTEON3 to c-r4k.c
  ...

Pull ACPI and power management updates from Rafael Wysocki:
 "ACPICA is the leader this time (63 commits), followed by cpufreq (28
  commits), devfreq (15 commits), system suspend/hibernation (12
  commits), ACPI video and ACPI device enumeration (10 commits each).

  We have no major new features this time, but there are a few
  significant changes of how things work.  The most visible one will
  probably be that we are now going to create platform devices rather
  than PNP devices by default for ACPI device objects with _HID.  That
  was long overdue and will be really necessary to be able to use the
  same drivers for the same hardware blocks on ACPI and DT-based systems
  going forward.  We're not expecting fallout from this one (as usual),
  but it's something to watch nevertheless.

  The second change having a chance to be visible is that ACPI video
  will now default to using native backlight rather than the ACPI
  backlight interface which should generally help systems with broken
  Win8 BIOSes.  We're hoping that all problems with the native backlight
  handling that we had previously have been addressed and we are in a
  good enough shape to flip the default, but this change should be easy
  enough to revert if need be.

  In addition to that, the system suspend core has a new mechanism to
  allow runtime-suspended devices to stay suspended throughout system
  suspend/resume transitions if some extra conditions are met
  (generally, they are related to coordination within device hierarchy).
  However, enabling this feature requires cooperation from the bus type
  layer and for now it has only been implemented for the ACPI PM domain
  (used by ACPI-enumerated platform devices mostly today).

  Also, the acpidump utility that was previously shipped as a separate
  tool will now be provided by the upstream ACPICA along with the rest
  of ACPICA code, which will allow it to be more up to date and better
  supported, and we have one new cpuidle driver (ARM clps711x).

  The rest is improvements related to certain specific use cases,
  cleanups and fixes all over the place.

  Specifics:

   - ACPICA update to upstream version 20140424.  That includes a number
     of fixes and improvements related to things like GPE handling,
     table loading, headers, memory mapping and unmapping, DSDT/SSDT
     overriding, and the Unload() operator.  The acpidump utility from
     upstream ACPICA is included too.  From Bob Moore, Lv Zheng, David
     Box, David Binderman, and Colin Ian King.

   - Fixes and cleanups related to ACPI video and backlight interfaces
     from Hans de Goede.  That includes blacklist entries for some new
     machines and using native backlight by default.

   - ACPI device enumeration changes to create platform devices rather
     than PNP devices for ACPI device objects with _HID by default.  PNP
     devices will still be created for the ACPI device object with
     device IDs corresponding to real PNP devices, so that change should
     not break things left and right, and we're expecting to see more
     and more ACPI-enumerated platform devices in the future.  From
     Zhang Rui and Rafael J Wysocki.

   - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
     to handle system suspend/resume on Asus T100 correctly.  From
     Heikki Krogerus and Rafael J Wysocki.

   - PM core update introducing a mechanism to allow runtime-suspended
     devices to stay suspended over system suspend/resume transitions if
     certain additional conditions related to coordination within device
     hierarchy are met.  Related PM documentation update and ACPI PM
     domain support for the new feature.  From Rafael J Wysocki.

   - Fixes and improvements related to the "freeze" sleep state.  They
     affect several places including cpuidle, PM core, ACPI core, and
     the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.

   - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
     Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.

   - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
     Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
     Camuso, and Toshi Kani.

   - System suspend/resume optimization in the ACPI battery driver from
     Lan Tianyu.

   - OPP (Operating Performance Points) subsystem updates from Chander
     Kashyap, Mark Brown, and Nishanth Menon.

   - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
     Stratos Karafotis, and Viresh Kumar.

   - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
     s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
     Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
     Viresh Kumar.

   - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
     Smythies, and Stratos Karafotis.

   - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.

   - Fix for the cpuidle menu governor from Chander Kashyap.

   - New ARM clps711x cpuidle driver from Alexander Shiyan.

   - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
     Fabian Frederick, Pali Rohár, and Sebastian Capella.

   - Intel RAPL (Running Average Power Limit) driver updates from Jacob
     Pan.

   - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.

   - devfreq core updates from Chanwoo Choi and Paul Bolle.

   - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
     Bartlomiej Zolnierkiewicz.

   - turbostat tool fix from Jean Delvare.

   - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
     and Thomas Renninger.

   - New ACPI ec_access.c tool for poking at the EC in a safe way from
     Thomas Renninger"

* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
  ACPICA: Namespace: Remove _PRP method support.
  intel_pstate: Improve initial busy calculation
  intel_pstate: add sample time scaling
  intel_pstate: Correct rounding in busy calculation
  intel_pstate: Remove C0 tracking
  PM / hibernate: fixed typo in comment
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ...

Pull ARM SoC driver changes from Olof Johansson:
 "SoC-near driver changes that we're merging through our tree.  Mostly
  because they depend on other changes we have staged, but in some cases
  because the driver maintainers preferred that we did it this way.

  This contains a largeish cleanup series of the omap_l3_noc bus driver,
  cpuidle rework for Exynos, some reset driver conversions and a long
  branch of TI EDMA fixes and cleanups, with more to come next release.

  The TI EDMA cleanups is a shared branch with the dmaengine tree, with
  a handful of Davinci-specific fixes on top.

  After discussion at last year's KS (and some more on the mailing
  lists), we are here adding a drivers/soc directory.  The purpose of
  this is to keep per-vendor shared code that's needed by different
  drivers but that doesn't fit into the MFD (nor drivers/platform)
  model.  We expect to keep merging contents for this hierarchy through
  arm-soc so we can keep an eye on what the vendors keep adding here and
  not making it a free-for-all to shove in crazy stuff"

* tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
  tty: serial: msm: Remove direct access to GSBI
  power: reset: keystone-reset: introduce keystone reset driver
  Documentation: dt: add bindings for keystone pll control controller
  Documentation: dt: add bindings for keystone reset driver
  soc: qcom: fix of_device_id table
  ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
  ARM: EXYNOS: Move the driver to drivers/cpuidle directory
  ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
  ARM: EXYNOS: Pass the AFTR callback to the platform_data
  ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
  ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
  ARM: EXYNOS: Move the AFTR state function into pm.c
  ARM: EXYNOS: Encapsulate the AFTR code into a function
  ARM: EXYNOS: Disable cpuidle for exynos5440
  ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
  ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
  ARM: EXYNOS: Remove ifdef for scu_enable in pm
  ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
  ARM: EXYNOS: Use the cpu_pm notifier for pm
  ...

This patch adds a cpuidle driver for systems based around the MIPS
Coherent Processing System (CPS) architecture. It supports four idle
states:

  - The standard MIPS wait instruction.

  - The non-coherent wait, clock gated & power gated states exposed by
    the recently added pm-cps layer.

The pm-cps layer is used to enter all the deep idle states. Since cores
in the clock or power gated states cannot service interrupts, the
gic_send_ipi_single function is modified to send a power up command for
the appropriate core to the CPC in cases where the target CPU has marked
itself potentially incoherent.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Add the wfi, cpu idle and cpu deep idle power states support for the
Armada XP SoCs.

All the latencies and the power consumption values used at the
"armada_370_xp_idle_driver" structure are preliminary and will be
modified in the future after running some measurements and analysis.

Based on the work of Nadav Haklai.

Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Add cpuidle support for ARM Cirrus Logic CLPS711X CPUs.
This CPU has an unique internal register and write to this location
will put the system into the Idle State by halting the clock to the
processor until an interrupt is generated.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Following patch ports the cpuidle framework for powernv
platform and also implements a cpuidle back-end powernv
idle driver calling on to power7_nap and snooze idle states.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Move the file from arch specific pseries/processor_idle.c
to drivers/cpuidle/cpuidle-pseries.c
Make the relevant Makefile and Kconfig changes.
Also, introduce Kconfig.powerpc in drivers/cpuidle
for all powerpc cpuidle drivers.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>