Pull MIPS fixes from Ralf Baechle:
 "This is the first round of fixes and tying up loose ends for MIPS.

   - plenty of fixes for build errors in specific obscure configurations
   - remove redundant code on the Lantiq platform
   - removal of a useless SEAD I2C driver that was causing a build issue
   - fix an earlier TLB exeption handler fix to also work on Octeon.
   - fix ISA level dependencies in FPU emulator's instruction decoding.
   - don't hardcode kernel command line in Octeon software emulator.
   - fix an earlier fix for the Loondson 2 clock setting"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: SEAD3: Fix I2C device registration.
  MIPS: SEAD3: Nuke PIC32 I2C driver.
  MIPS: ftrace: Fix a microMIPS build problem
  MIPS: MSP71xx: Fix build error
  MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled
  MIPS: Prevent compiler warning from cop2_{save,restore}
  MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle
  MIPS: idle: Remove leftover __pastwait symbol and its references
  MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds
  MIPS: ptrace.h: Add a missing include
  MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled
  MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present
  MIPS: Octeon: Remove special case for simulator command line.
  MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
  MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge
  pci: pci-lantiq: remove duplicate check on resource
  MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC
  MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions

The MIPS_CPS_PM and MIPS_CPS_CPUIDLE implementation should depend
on the MIPS_CPS symbol to avoid the following build problem

arch/mips/kernel/pm-cps.c: In function 'cps_pm_enter_state':
arch/mips/kernel/pm-cps.c:164:26: error: 'cpu_coherent_mask' undeclared
(first use in this function)
cpumask_clear_cpu(cpu, &cpu_coherent_mask);
                            ^
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/7798/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We hard code the metrics relevant for cpuidle states in the kernel today.
Instead pick them up from the device tree so that they remain relevant
and updated for the system that the kernel is running on.

Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
     Hansen)

   - Various sched/idle refinements for better idle handling (Nicolas
     Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)

   - sched/numa updates and optimizations (Rik van Riel)

   - sysbench speedup (Vincent Guittot)

   - capacity calculation cleanups/refactoring (Vincent Guittot)

   - Various cleanups to thread group iteration (Oleg Nesterov)

   - Double-rq-lock removal optimization and various refactorings
     (Kirill Tkhai)

   - various sched/deadline fixes

  ... and lots of other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
  sched/fair: Delete resched_cpu() from idle_balance()
  sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
  sched: Improve sysbench performance by fixing spurious active migration
  sched/x86: Fix up typo in topology detection
  x86, sched: Add new topology for multi-NUMA-node CPUs
  sched/rt: Use resched_curr() in task_tick_rt()
  sched: Use rq->rd in sched_setaffinity() under RCU read lock
  sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
  sched: Use dl_bw_of() under RCU read lock
  sched/fair: Remove duplicate code from can_migrate_task()
  sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
  sched: print_rq(): Don't use tasklist_lock
  sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
  sched: Fix the task-group check in tg_has_rt_tasks()
  sched/fair: Leverage the idle state info when choosing the "idlest" cpu
  sched: Let the scheduler see CPU idle states
  sched/deadline: Fix inter- exclusive cpusets migrations
  sched/deadline: Clear dl_entity params when setscheduling to different class
  sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
  ...

Pull ACPI and power management updates from Rafael Wysocki:
 "Features-wise, to me the most important this time is a rework of
  wakeup interrupts handling in the core that makes them work
  consistently across all of the available sleep states, including
  suspend-to-idle.  Many thanks to Thomas Gleixner for his help with
  this work.

  Second is an update of the generic PM domains code that has been in
  need of some care for quite a while.  Unused code is being removed, DT
  support is being added and domains are now going to be attached to
  devices in bus type code in analogy with the ACPI PM domain.  The
  majority of work here was done by Ulf Hansson who also has been the
  most active developer this time.

  Apart from this we have a traditional ACPICA update, this time to
  upstream version 20140828 and a few ACPI wakeup interrupts handling
  patches on top of the general rework mentioned above.  There also are
  several cpufreq commits including renaming the cpufreq-cpu0 driver to
  cpufreq-dt, as this is what implements generic DT-based cpufreq
  support, and a new DT-based idle states infrastructure for cpuidle.

  In addition to that, the ACPI LPSS driver is updated, ACPI support for
  Apple machines is improved, a few bugs are fixed and a few cleanups
  are made all over.

  Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree
  maintained by Kevin Hilman that will be merged through the PM tree.

  Numbers-wise, the generic PM domains update takes the lead this time
  with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd
  place goes to the wakeup interrupts handling rework (13 commits).

  Specifics:

   - Rework the handling of wakeup IRQs by the IRQ core such that all of
     them will be switched over to "wakeup" mode in suspend_device_irqs()
     and in that mode the first interrupt will abort system suspend in
     progress or wake up the system if already in suspend-to-idle (or
     equivalent) without executing any interrupt handlers.  Among other
     things that eliminates the wakeup-related motivation to use the
     IRQF_NO_SUSPEND interrupt flag with interrupts which don't really
     need it and should not use it (Thomas Gleixner and Rafael Wysocki)

   - Switch over ACPI to handling wakeup interrupts with the help of the
     new mechanism introduced by the above IRQ core rework (Rafael Wysocki)

   - Rework the core generic PM domains code to eliminate code that's
     not used, add DT support and add a generic mechanism by which
     devices can be added to PM domains automatically during enumeration
     (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).

   - Add debugfs-based mechanics for debugging generic PM domains
     (Maciej Matraszek).

   - ACPICA update to upstream version 20140828.  Included are updates
     related to the SRAT and GTDT tables and the _PSx methods are in the
     METHOD_NAME list now (Bob Moore and Hanjun Guo).

   - Add _OSI("Darwin") support to the ACPI core (unfortunately, that
     can't really be done in a straightforward way) to prevent
     Thunderbolt from being turned off on Apple systems after boot (or
     after resume from system suspend) and rework the ACPI Smart Battery
     Subsystem (SBS) driver to work correctly with Apple platforms
     (Matthew Garrett and Andreas Noever).

   - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code,
     adding support for 133MHz I2C source clock on Intel Baytrail to it
     and making it avoid using UART RTS override with Auto Flow Control
     (Heikki Krogerus).

   - ACPI backlight updates removing the video_set_use_native_backlight
     quirk which is not necessary any more, making the code check the
     list of output devices returned by the _DOD method to avoid
     creating acpi_video interfaces that won't work and adding a quirk
     for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak)

   - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin)

   - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
     Sudip Mukherjee, Yijing Wang, and Zhang Rui)

   - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
     Rasmus Villemoes)

   - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change
     among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U
     Murthy, Shilpasri G Bhat, Lucas Stach)

   - cpuidle support for DT-based idle states infrastructure, new ARM64
     cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus
     Villemoes)

   - ARM big.LITTLE cpuidle driver updates: support for DT-based
     initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
     Kevin Hilman)

   - Rework of the test_suspend kernel command line argument and a new
     trace event for console resume (Srinivas Pandruvada, Todd E Brandt)

   - Second attempt to optimize swsusp_free() (hibernation core) to make
     it avoid going through all PFNs which may be way too slow on some
     systems (Joerg Roedel)

   - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).

   - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry
     update in MAINTAINERS (Heiko Stübner, Kevin Hilman)

   - PM core fix related to clock management (Geert Uytterhoeven)

   - PM core's sysfs code cleanup (Johannes Berg)"

* tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits)
  ACPI / fan: printk replacement
  PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
  PM / Domains: Rename cpu_data to cpuidle_data
  cpufreq: cpufreq-dt: fix potential double put of cpu OF node
  cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
  PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
  cpufreq: ppc-corenet: remove duplicate update of cpu_data
  ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
  PM / sleep: Rename platform suspend/resume functions in suspend.c
  PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
  ACPICA: Introduce acpi_enable_all_wakeup_gpes()
  ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block()
  ACPI / video: check _DOD list when creating backlight devices
  PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
  cpufreq: Replace strnicmp with strncasecmp
  cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec
  cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum
  cpufreq: Allow stop CPU callback to be used by all cpufreq drivers
  PM / devfreq: exynos: Enable building exynos PPMU as module
  PM / devfreq: Export helper functions for drivers
  ...

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support.  Among the things new for this release
  are:

   - at91: Added support for the new SAMA5D4 SoC, following the earlier
     SAMA5D3
   - bcm: Added support for BCM63XX family of DSL SoCs
   - hisi: Added support for HiP04 server-class SoC
   - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
   - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC

  Noteworthy changes to existing SoC support are:

   - imx: convert i.MX1 to device tree
   - omap: lots of power management work
   - omap: base support to enable moving to standard UART driver
   - shmobile: lots of progress for multiplatform support, still
     ongoing"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
  ARM: hisi: depend on ARCH_MULTI_V7
  CNS3xxx: Fix debug UART.
  ARM: at91: fix nommu build regression
  ARM: meson: add basic support for MesonX SoCs
  ARM: meson: debug: add debug UART for earlyprintk support
  irq: Export handle_fasteoi_irq
  ARM: mediatek: Add earlyprintk support for mt6589
  ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
  ARM: debug: fix alphanumerical order on debug uarts
  ARM: at91: document Atmel SMART compatibles
  ARM: at91: add sama5d4 support to sama5_defconfig
  ARM: at91: dt: add device tree file for SAMA5D4ek board
  ARM: at91: dt: add device tree file for SAMA5D4 SoC
  ARM: at91: SAMA5D4 SoC detection code and low level routines
  ARM: at91: introduce basic SAMA5D4 support
  clk: at91: add a driver for the h32mx clock
  ARM: pxa3xx: provide specific platform_devices for all ssp ports
  ARM: pxa: ssp: provide platform_device_id for PXA3xx
  ARM: OMAP4+: Remove static iotable mappings for SRAM
  ARM: OMAP4+: Move SRAM data to DT
  ...

Pull ARM cpuidle changes for v3.18 from Daniel Lezcano:

"this pull request contains the following changes:

 * Lorenzo Pieralisi implemented a framework to initialize the ARM
   cpuidle drivers with the DT. As an example, it provided a couple of
   drivers using it: arm64 and big little. The former one is a new
   driver while the latter is a change. There was also a patch for
   Exynos allowing to use this framework but as it depends on a change
   in Samsung's tree, I postponed this patch until the change is visible
   after the merge. The set of changes depends on some other changes
   made in the ARM64 tree, for this reason a shared branch is used. This
   is why there is a merge from arm64 in my pull request. I believe we
   already used this procedure.

 * Kevin Hilman added the compatible string for the exynos 5800 in the DT"

* 'cpuidle/3.18' of https://git.linaro.org/people/daniel.lezcano/linux:
  drivers: cpuidle: initialize big.LITTLE driver through DT
  drivers: cpuidle: CPU idle ARM64 driver
  drivers: cpuidle: implement DT based idle states infrastructure
  cpuidle: big.LITTLE: add Exynos5800 compatible string
  arm64: add PSCI CPU_SUSPEND based cpu_suspend support
  arm64: kernel: introduce cpu_init_idle CPU operation
  arm64: kernel: refactor the CPU suspend API for retention states
  Documentation: arm: define DT idle states bindings

Pull "arm: Xilinx Zynq cleanup patches for v3.18" from Michal Simek:

- PM support
- Fix L2 useless setting

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'zynq-cleanup-for-3.18' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: Remove useless L2C AUX setting
  ARM: zynq: Rename 'zynq_platform_cpu_die'
  ARM: zynq: Remove hotplug.c
  ARM: zynq: Synchronise zynq_cpu_die/kill
  ARM: zynq: cpuidle: Remove pointless code
  ARM: zynq: Remove invalidate cache for cpu die
  ARM: zynq: PM: Enable DDR clock stop
  ARM: zynq: DT: Add DDRC node
  Documentation: devicetree: Add binding for Synopsys DDR controller
  ARM: zynq: PM: Enable A9 internal clock gating feature

With the introduction of DT based idle states, CPUidle drivers for ARM
can now initialize idle states data through properties in the device tree.

This patch adds code to the big.LITTLE CPUidle driver to dynamically
initialize idle states data through the updated device tree source file.

Cc: Chander Kashyap <k.chander@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>