There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field.  Move the cpuidle sysfs code to use default_groups field which
has been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix function name in sysfs.c kernel-doc comment
to remove a warning found by running scripts/kernel-doc,
which is caused by using 'make W=1'.

drivers/cpuidle/sysfs.c:512: warning: expecting prototype for
cpuidle_remove_driver_sysfs(). Prototype was for
cpuidle_remove_state_sysfs() instead

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The word `these' in a comment is repeated, so drop one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are all the driver updates for SoC specific drivers. There are a
  couple of subsystems with individual maintainers picking up their
  patches here:

   - The reset controller subsystem add support for a few new SoC
     variants to existing drivers, along with other minor improvements

   - The OP-TEE subsystem gets a driver for the ARM FF-A transport

   - The memory controller subsystem has improvements for Tegra,
     Mediatek, Renesas, Freescale and Broadcom specific drivers.

   - The tegra cpuidle driver changes get merged through this tree this
     time. There are only minor changes, but they depend on other tegra
     driver updates here.

   - The ep93xx platform finally moves to using the drivers/clk/
     subsystem, moving the code out of arch/arm in the process. This
     depends on a small sound driver change that is included here as
     well.

   - There are some minor updates for Qualcomm and Tegra specific
     firmware drivers.

  The other driver updates are mainly for drivers/soc, which contains a
  mixture of vendor specific drivers that don't really fit elsewhere:

   - Mediatek drivers gain more support for MT8192, with new support for
     hw-mutex and mmsys routing, plus support for reset lines in the
     mmsys driver.

   - Qualcomm gains a new "sleep stats" driver, and support for the
     "Generic Packet Router" in the APR driver.

   - There is a new user interface for routing the UARTS on ASpeed BMCs,
     something that apparently nobody else has needed so far.

   - More drivers can now be built as loadable modules, in particular
     for Broadcom and Samsung platforms.

   - Lots of improvements to the TI sysc driver for better
     suspend/resume support"

  Finally, there are lots of minor cleanups and new device IDs for
  amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
  layerscape, allwinner, broadcom, and omap"

* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
  optee: Fix spelling mistake "reclain" -> "reclaim"
  Revert "firmware: qcom: scm: Add support for MC boot address API"
  qcom: spm: allow compile-testing
  firmware: arm_ffa: Remove unused 'compat_version' variable
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: aspeed: Add UART routing support
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  ...

Qualcomm driver updates for v5.16

This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.

SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.

It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.

It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.

Support for releasing secondary CPUs on MSM8226 is introduced.

The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.

Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().

* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
  soc: qcom: apr: Add GPR support
  soc: dt-bindings: qcom: add gpr bindings
  soc: qcom: apr: make code more reuseable
  soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
  soc: dt-bindings: qcom: apr: convert to yaml
  dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
  dt-bindings: msm/dp: Remove aoss-qmp header
  soc: qcom: aoss: Drop power domain support
  dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
  dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
  dt-bindings: soc: qcom: aoss: Add SM6350 compatible
  soc: qcom: llcc: Disable MMUHWT retention
  soc: qcom: smd-rpm: Add QCM2290 compatible
  dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
  firmware: qcom_scm: Add compatible for MSM8953 SoC
  dt-bindings: firmware: qcom-scm: Document msm8953 bindings
  soc: qcom: pdr: Prefer strscpy over strcpy
  soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
  soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
  ...

Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Check whether PMC is ready before proceeding with the cpuidle registration.
This fixes racing with the PMC driver probe order, which results in a
disabled deepest CC6 idling state if cpuidle driver is probed before the
PMC.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable compile testing of tegra-cpuidle driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Commit c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
fixes the cleanup of kobjects; however, it removes kfree() calls
altogether, leading to memory leaks.

Fix those and also defer the initialization of dev->kobj_dev until
after the error check, so that we do not end up with a dangling
pointer.

Fixes: c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
Signed-off-by: Anel Orazgaliyeva <anelkz@amazon.de>
Suggested-by: Aman Priyadarshi <apeureka@amazon.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.

In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.

Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.

Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add support for registering devices via MFD cells to Simple MFD (I2C)

  New Drivers:
   - Add support for Renesas Synchronization Management Unit (SMU)

  New Device Support:
   - Add support for N5010 to Intel M10 BMC
   - Add support for Cannon Lake to Intel LPSS ACPI
   - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
   - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86

  New Functionality:
   - Add support for GPIO to Intel LPC ICH
   - Add support for Reset to Texas Instruments TPS65086

  Fix-ups:
   - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
   - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
   - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
   - Pass 'supplied-from' property through axp288_fuel_gauge via swnode
   - Remove unused file entry; MAINTAINERS
   - Make interrupt line optional; tps65086
   - Rename db8500-cpuidle driver symbol; db8500-prcmu
   - Remove support for unused hardware; tqmx86
   - Provide a standard LPC clock frequency for unknown boards; tqmx86
   - Remove unused code; ti_am335x_tscadc
   - Use of_iomap() instead of ioremap(); syscon

  Bug Fixes:
   - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
   - Fix incorrect/misleading frequencies; db8500-prcmu
   - Mitigate namespace clash with other GPIOBASE users"

* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
  mfd: lpc_sch: Rename GPIOBASE to prevent build error
  mfd: syscon: Use of_iomap() instead of ioremap()
  dt-bindings: mfd: Add Broadcom CRU
  mfd: ti_am335x_tscadc: Delete superfluous error message
  mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
  mfd: tqmx86: Add support for TQ-Systems DMI IDs
  mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
  mfd: tqmx86: Fix typo in "platform"
  mfd: tqmx86: Remove incorrect TQMx90UC board ID
  mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
  mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
  mfd/cpuidle: ux500: Rename driver symbol
  mfd: tps65086: Add cell entry for reset driver
  mfd: tps65086: Make interrupt line optional
  dt-bindings: mfd: Convert tps65086.txt to YAML
  MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
  mfd: db8500-prcmu: Handle missing FW variant
  mfd: db8500-prcmu: Rename register header
  mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
  mfd: Don't use irq_create_mapping() to resolve a mapping
  ...