commit 46d8c4b28652d35dc6cfb5adf7f54e102fc04384 upstream.

This was detected by the self-test thanks to Ard's chunking patch.

I finally got around to testing this out on my ancient Via box.  It
turns out that the workaround got the assembly wrong and we end up
doing count + initial cycles of the loop instead of just count.

This obviously causes corruption, either by overwriting the source
that is yet to be processed, or writing over the end of the buffer.

On CPUs that don't require the workaround only ECB is affected.
On Nano CPUs both ECB and CBC are affected.

This patch fixes it by doing the subtraction prior to the assembly.

Fixes: a76c1c23d0c3 ("crypto: padlock-aes - work around Nano CPU...")
Cc: <stable@vger.kernel.org>
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5d59ad6eea82ef8df92b4109615a0dde9d8093e9 upstream.

If one of the later memory allocations in rypto4xx_build_pdr()
fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed.

crypto4xx_build_sdr() has the same issue with dev->sdr.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a728a196d253530f17da5c86dc7dfbe58c5f7094 upstream.

alg entries are only added to the list, after the registration
was successful. If the registration failed, it was never added
to the list in the first place.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1411b5218adbcf1d45ddb260db5553c52e8d917c upstream.

In the vmx AES init routines we do a printk(KERN_INFO ...) to report
the fallback implementation we're using.

However with a slow console this can significantly affect the speed of
crypto operations. Using 'cryptsetup benchmark' the removal of the
printk() leads to a ~5x speedup for aes-cbc decryption.

So remove them.

Fixes: 8676590a1593 ("crypto: vmx - Adding AES routines for VMX module")
Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module")
Fixes: 4f7f60d312b3 ("crypto: vmx - Adding CTR routines for VMX module")
Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 362f924b64ba0f4be2ee0cb697690c33d40be721 upstream.

Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.

The remaining ones need more careful inspection before a conversion can
happen. On the TODO.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7c73cf4cc2ac16465f5102437dc0a12d66671bd6 ]

The MODULE_ALIAS is required to enable the sun4i-ss driver to load
automatically when built at a module. Tested on a Cubietruck.

Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c927b080c67e3e97193c81fc1d27f4251bf4e036 upstream.

In AES-ECB mode crypt is done with key only, so any use of IV
can cause kernel Oops. Use IV only in AES-CBC and AES-CTR.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reported-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org # can be applied after commit 8f9702aad138
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 225ece3e7dad4cfc44cca38ce7a3a80f255ea8f1 upstream.

In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails
with -ENODEV, caam_probe() enters an endless loop:

run_descriptor_deco0
	ret -ENODEV
	-> instantiate_rng
		-ENODEV, overwritten by -EAGAIN
		ret -EAGAIN
		-> caam_probe
			-EAGAIN results in endless loop

It turns out the error path in instantiate_rng() is incorrect,
the checks are done in the wrong order.

Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles")
Reported-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Auer Lukas <lukas.auer@aisec.fraunhofer.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 203f45003a3d03eea8fa28d74cfc74c354416fdb upstream.

queue_cache_init is first called for the Control Word Queue
(n2_crypto_probe). At that time, queue_cache[0] is NULL and a new
kmem_cache will be allocated. If the subsequent n2_register_algs call
fails, the kmem_cache will be released in queue_cache_destroy, but
queue_cache_init[0] is not set back to NULL.

So when the Module Arithmetic Unit gets probed next (n2_mau_probe),
queue_cache_init will not allocate a kmem_cache again, but leave it
as its bogus value, causing a BUG() to trigger when queue_cache[0] is
eventually passed to kmem_cache_zalloc:

	n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7
	n2_crypto: Registered NCS HVAPI version 2.0
	called queue_cache_init
	n2_crypto: md5 alg registration failed
	n2cp f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms.
	called queue_cache_destroy
	n2cp: probe of f028687c failed with error -22
	n2_crypto: Found NCP at /virtual-devices@100/ncp@6
	n2_crypto: Registered NCS HVAPI version 2.0
	called queue_cache_init
	kernel BUG at mm/slab.c:2993!
	Call Trace:
	 [0000000000604488] kmem_cache_alloc+0x1a8/0x1e0
                  (inlined) kmem_cache_zalloc
                  (inlined) new_queue
                  (inlined) spu_queue_setup
                  (inlined) handle_exec_unit
	 [0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto]
	 [0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto]
	 [000000000084b174] platform_drv_probe+0x34/0xc0

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 778f81d6cdb7d25360f082ac0384d5103f04eca5 ]

If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.

On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)

/dev/mapper/swap_crypt:
 Timing buffered disk reads:  14 MB in  3.68 seconds =   3.81 MB/sec

The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:

/dev/mapper/swap_crypt:
 Timing buffered disk reads: 104 MB in  3.03 seconds =  34.31 MB/sec

Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>