Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

virtio core already sets the .owner, so driver does not need to.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-10-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull crypto fixes from Herbert Xu:
 "Fix a bug in the new ecc P521 code as well as a buggy fix in qat"

* tag 'v6.10-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ecc - Prevent ecc_digits_from_bytes from reading too many bytes
  crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak

Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...

Using completion_done to determine whether the caller has gone
away only works after a complete call.  Furthermore it's still
possible that the caller has not yet called wait_for_completion,
resulting in another potential UAF.

Fix this by making the caller use cancel_work_sync and then freeing
the memory safely.

Fixes: 7d42e097607c ("crypto: qat - resolve race condition during AER recovery")
Cc: <stable@vger.kernel.org> #6.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Remove crypto stats interface

  Algorithms:
   - Add faster AES-XTS on modern x86_64 CPUs
   - Forbid curves with order less than 224 bits in ecc (FIPS 186-5)
   - Add ECDSA NIST P521

  Drivers:
   - Expose otp zone in atmel
   - Add dh fallback for primes > 4K in qat
   - Add interface for live migration in qat
   - Use dma for aes requests in starfive
   - Add full DMA support for stm32mpx in stm32
   - Add Tegra Security Engine driver

  Others:
   - Introduce scope-based x509_certificate allocation"

* tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits)
  crypto: atmel-sha204a - provide the otp content
  crypto: atmel-sha204a - add reading from otp zone
  crypto: atmel-i2c - rename read function
  crypto: atmel-i2c - add missing arg description
  crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()
  crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()
  crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout()
  crypto: caam - i.MX8ULP donot have CAAM page0 access
  crypto: caam - init-clk based on caam-page0-access
  crypto: starfive - Use fallback for unaligned dma access
  crypto: starfive - Do not free stack buffer
  crypto: starfive - Skip unneeded fallback allocation
  crypto: starfive - Skip dma setup for zeroed message
  crypto: hisilicon/sec2 - fix for register offset
  crypto: hisilicon/debugfs - mask the unnecessary info from the dump
  crypto: qat - specify firmware files for 402xx
  crypto: x86/aes-gcm - simplify GCM hash subkey derivation
  crypto: x86/aes-gcm - delete unused GCM assembly code
  crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath()
  hwrng: stm32 - repair clock handling
  ...

Pull trusted keys updates from Jarkko Sakkinen:
 "This contains a new key type for the Data Co-Processor (DCP), which is
  an IP core built into many NXP SoCs such as i.mx6ull"

* tag 'keys-trusted-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  docs: trusted-encrypted: add DCP as new trust source
  docs: document DCP-backed trusted keys kernel params
  MAINTAINERS: add entry for DCP-based trusted keys
  KEYS: trusted: Introduce NXP DCP-backed trusted keys
  KEYS: trusted: improve scalability of trust source config
  crypto: mxs-dcp: Add support for hardware-bound keys

Pull s390 updates from Alexander Gordeev:

 - Store AP Query Configuration Information in a static buffer

 - Rework the AP initialization and add missing cleanups to the error
   path

 - Swap IRQ and AP bus/device registration to avoid race conditions

 - Export prot_virt_guest symbol

 - Introduce AP configuration changes notifier interface to facilitate
   modularization of the AP bus

 - Add CONFIG_AP kernel configuration option to allow modularization of
   the AP bus

 - Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
   and dependency and rename it to CONFIG_AP_DEBUG

 - Convert sprintf() and snprintf() to sysfs_emit() in CIO code

 - Adjust indentation of RELOCS command build step

 - Make crypto performance counters upward compatible

 - Convert make_page_secure() and gmap_make_secure() to use folio

 - Rework channel-utilization-block (CUB) handling in preparation of
   introducing additional CUBs

 - Use attribute groups to simplify registration, removal and extension
   of measurement-related channel-path sysfs attributes

 - Add a per-channel-path binary "ext_measurement" sysfs attribute that
   provides access to extended channel-path measurement data

 - Export measurement data for all channel-measurement-groups (CMG), not
   only for a specific ones. This enables support of new CMG data
   formats in userspace without the need for kernel changes

 - Add a per-channel-path sysfs attribute "speed_bps" that provides the
   operating speed in bits per second or 0 if the operating speed is not
   available

 - The CIO tracepoint subchannel-type field "st" is incorrectly set to
   the value of subchannel-enabled SCHIB "ena" field. Fix that

 - Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS

 - Consider the maximum physical address available to a DCSS segment
   (512GB) when memory layout is set up

 - Simplify the virtual memory layout setup by reducing the size of
   identity mapping vs vmemmap overlap

 - Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
   This will allow to place the kernel image next to kernel modules

 - Move everyting KASLR related from <asm/setup.h> to <asm/page.h>

 - Put virtual memory layout information into a structure to improve
   code generation

 - Currently __kaslr_offset is the kernel offset in both physical and
   virtual memory spaces. Uncouple these offsets to allow uncoupling of
   the addresses spaces

 - Currently the identity mapping base address is implicit and is always
   set to zero. Make it explicit by putting into __identity_base
   persistent boot variable and use it in proper context

 - Introduce .amode31 section start and end macros AMODE31_START and
   AMODE31_END

 - Introduce OS_INFO entries that do not reference any data in memory,
   but rather provide only values

 - Store virtual memory layout in OS_INFO. It is read out by
   makedumpfile, crash and other tools

 - Store virtual memory layout in VMCORE_INFO. It is read out by crash
   and other tools when /proc/kcore device is used

 - Create additional PT_LOAD ELF program header that covers kernel image
   only, so that vmcore tools could locate kernel text and data when
   virtual and physical memory spaces are uncoupled

 - Uncouple physical and virtual address spaces

 - Map kernel at fixed location when KASLR mode is disabled. The
   location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
   value.

 - Rework deployment of kernel image for both compressed and
   uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
   configuration value

 - Move .vmlinux.relocs section in front of the compressed kernel. The
   interim section rescue step is avoided as result

 - Correct modules thunk offset calculation when branch target is more
   than 2GB away

 - Kernel modules contain their own set of expoline thunks. Now that the
   kernel modules area is less than 4GB away from kernel expoline
   thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
   the default if the compiler supports it

 - userfaultfd can insert shared zeropages into processes running VMs,
   but that is not allowed for s390. Fallback to allocating a fresh
   zeroed anonymous folio and insert that instead

 - Re-enable shared zeropages for non-PV and non-skeys KVM guests

 - Rename hex2bitmap() to ap_hex2bitmap() and export it for external use

 - Add ap_config sysfs attribute to provide the means for setting or
   displaying adapters, domains and control domains assigned to a
   vfio-ap mediated device in a single operation

 - Make vfio_ap_mdev_link_queue() ignore duplicate link requests

 - Add write support to ap_config sysfs attribute to allow atomic update
   a vfio-ap mediated device state

 - Document ap_config sysfs attribute

 - Function os_info_old_init() is expected to be called only from a
   regular kdump kernel. Enable it to be called from a stand-alone dump
   kernel

 - Address gcc -Warray-bounds warning and fix array size in struct
   os_info

 - s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks

 - Use unwinder instead of __builtin_return_address() with ftrace to
   prevent returning of undefined values

 - Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
   kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
   disabled

 - Compile kernel with -fPIC and link with -no-pie to allow kpatch
   feature always succeed and drop the whole CONFIG_PIE_BUILD
   option-enabled code

 - Add missing virt_to_phys() converter for VSIE facility and crypto
   control blocks

* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
  Revert "s390: Relocate vmlinux ELF data to virtual address space"
  KVM: s390: vsie: Use virt_to_phys for crypto control block
  s390: Relocate vmlinux ELF data to virtual address space
  s390: Compile kernel with -fPIC and link with -no-pie
  s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
  s390/ftrace: Use unwinder instead of __builtin_return_address()
  s390/pci: Drop unneeded reference to CONFIG_DMI
  s390/os_info: Fix array size in struct os_info
  s390/os_info: Initialize old os_info in standalone dump kernel
  docs: Update s390 vfio-ap doc for ap_config sysfs attribute
  s390/vfio-ap: Add write support to sysfs attr ap_config
  s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
  s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
  s390/ap: Externalize AP bus specific bitmap reading function
  s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
  mm/userfaultfd: Do not place zeropages when zeropages are disallowed
  s390/expoline: Make modules use kernel expolines
  s390/nospec: Correct modules thunk offset calculation
  s390/boot: Do not rescue .vmlinux.relocs section
  s390/boot: Rework deployment of the kernel image
  ...

Set up sysfs for the Atmel SHA204a. Provide the content of the otp zone as
an attribute field on the sysfs entry. Thereby make sure that if the chip
is locked, not connected or trouble with the i2c bus, the sysfs device is
not set up. This is mostly already handled in atmel-i2c.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>