Pull more power management updates from Rafael Wysocki:
 "These are ARM cpufreq updates and operating performance points (OPP)
  updates plus one cpuidle update adding a new trace point.

  Specifics:

   - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).

   - Minor cleanups and support for new boards for Qcom cpufreq drivers
     (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).

   - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).

   - Make dev_pm_opp_set_regulators() accept NULL terminated list
     (Viresh Kumar).

   - Add dev_pm_opp_set_config() and friends and migrate other users and
     helpers to using them (Viresh Kumar).

   - Add support for multiple clocks for a device (Viresh Kumar and
     Krzysztof Kozlowski).

   - Configure resources before adding OPP table for Venus (Stanimir
     Varbanov).

   - Keep reference count up for opp->np and opp_table->np while they
     are still in use (Liang He).

   - Minor OPP cleanups (Viresh Kumar and Yang Li).

   - Add a trace event for cpuidle to track missed (too deep or too
     shallow) wakeups (Kajetan Puchalski)"

* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
  cpuidle: Add cpu_idle_miss trace event
  venus: pm_helpers: Fix warning in OPP during probe
  OPP: Don't drop opp->np reference while it is still in use
  OPP: Don't drop opp_table->np reference while it is still in use
  cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
  dt-bindings: opp: Add msm8939 to the compatible list
  dt-bindings: opp: Add missing compat devices
  dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
  cpufreq: Change order of online() CB and policy->cpus modification
  cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
  cpufreq: qcom-hw: Disable LMH irq when disabling policy
  cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
  cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
  cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
  OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
  PM / devfreq: tegra30: Register config_clks helper
  OPP: Allow config_clks helper for single clk case
  OPP: Provide a simple implementation to configure multiple clocks
  OPP: Assert clk_count == 1 for single clk helpers
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  changes for 6.0-rc1.

  Highlights include:

   - large set of IIO driver updates, additions, and cleanups

   - new habanalabs device support added (loads of register maps much
     like GPUs have)

   - soundwire driver updates

   - phy driver updates

   - slimbus driver updates

   - tiny virt driver fixes and updates

   - misc driver fixes and updates

   - interconnect driver updates

   - hwtracing driver updates

   - fpga driver updates

   - extcon driver updates

   - firmware driver updates

   - counter driver update

   - mhi driver fixes and updates

   - binder driver fixes and updates

   - speakup driver fixes

  All of these have been in linux-next for a while without any reported
  problems"

* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
  drivers: lkdtm: fix clang -Wformat warning
  char: remove VR41XX related char driver
  misc: Mark MICROCODE_MINOR unused
  spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
  dt-bindings: iio: adc: Add compatible for MT8188
  iio: light: isl29028: Fix the warning in isl29028_remove()
  iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  iio: adc: max1027: unlock on error path in max1027_read_single_value()
  iio: proximity: sx9324: add empty line in front of bullet list
  iio: magnetometer: hmc5843: Remove duplicate 'the'
  iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  ...

Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh
Kumar:

"- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
   Kumar).

 - Add dev_pm_opp_set_config() and friends and migrate other
   users/helpers to using them (Viresh Kumar).

 - Add support for multiple clocks for a device (Viresh Kumar and
   Krzysztof Kozlowski).

 - Configure resources before adding OPP table for Venus (Stanimir
   Varbanov).

 - Keep reference count up for opp->np and opp_table->np while they are
   still in use (Liang He).

 - Minor cleanups (Viresh Kumar and Yang Li)."

* tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits)
  venus: pm_helpers: Fix warning in OPP during probe
  OPP: Don't drop opp->np reference while it is still in use
  OPP: Don't drop opp_table->np reference while it is still in use
  OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
  PM / devfreq: tegra30: Register config_clks helper
  OPP: Allow config_clks helper for single clk case
  OPP: Provide a simple implementation to configure multiple clocks
  OPP: Assert clk_count == 1 for single clk helpers
  OPP: Add key specific assert() method to key finding helpers
  OPP: Compare bandwidths for all paths in _opp_compare_key()
  OPP: Allow multiple clocks for a device
  dt-bindings: opp: accept array of frequencies
  OPP: Make dev_pm_opp_set_opp() independent of frequency
  OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
  OPP: Remove rate_not_available parameter to _opp_add()
  OPP: Use consistent names for OPP table instances
  OPP: Use generic key finding helpers for bandwidth key
  OPP: Use generic key finding helpers for level key
  OPP: Add generic key finding helpers and use them for freq APIs
  OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
  ...

Georgi writes:

interconnect changes for 5.20

Here are the interconnect changes for the 5.20-rc1 merge window consisting
of two new drivers, misc driver improvements and new device managed API.

 Core change:
- Add device managed bulk API

 Driver changes:
- New driver for NXP i.MX8MP platforms
- New driver for Qualcomm SM6350 platforms
- Multiple bucket support for Qualcomm RPM-based drivers.

Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
  PM / devfreq: imx: Register i.MX8MP interconnect device
  interconnect: imx: Add platform driver for imx8mp
  interconnect: imx: configure NoC mode/prioriry/ext_control
  interconnect: imx: introduce imx_icc_provider
  interconnect: imx: set src node
  interconnect: imx: fix max_node_id
  interconnect: qcom: icc-rpm: Set bandwidth and clock for bucket values
  interconnect: qcom: icc-rpm: Support multiple buckets
  interconnect: qcom: icc-rpm: Change to use qcom_icc_xlate_extended()
  interconnect: qcom: Move qcom_icc_xlate_extended() to a common file
  dt-bindings: interconnect: Update property for icc-rpm path tag
  interconnect: icc-rpm: Set destination bandwidth as well as source bandwidth
  interconnect: qcom: msm8939: Use icc_sync_state
  interconnect: add device managed bulk API
  dt-bindings: interconnect: add fsl,imx8mp.h
  dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc
  interconnect: qcom: Add SM6350 driver support
  dt-bindings: interconnect: Add Qualcomm SM6350 NoC support
  dt-bindings: interconnect: qcom: Split out rpmh-common bindings
  interconnect: qcom: icc-rpmh: Support child NoC device probe

Same to i.MX8MM/N/Q, register i.MX8MP interconnect device to make
i.MX8MP Interconnect driver work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-10-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

It's difficult to notice that driver failed to probe by looking at KMSG
when devm_devfreq_add_device() fails. Add explicit error message for this
case.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

The 3rd argument to the function of_get_property is a pointer and it is
being passed using 0. Use NULL instead.

Cleans up sparse warning:
warning: Using plain integer as NULL pointer

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

There are 4 warnings there:
	drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'val' not described in 'qos_min_notifier_call'
	drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'ptr' not described in 'qos_min_notifier_call'
	drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'val' not described in 'qos_max_notifier_call'
	drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'ptr' not described in 'qos_max_notifier_call'

It turns that neither val nor ptr are actually used on those
function, so document as such.

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

We introduce a devfreq driver for the MediaTek Cache Coherent Interconnect
(CCI) used by some MediaTek SoCs.

In this driver, we use the passive devfreq driver to get target frequencies
and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek CCI
is supplied by the same regulators with the little core CPUs.

Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

There is a corner case with Tegra30, where we want to skip clk
configuration that happens via dev_pm_opp_set_opp(), but still want the
OPP core to read the "opp-hz" property so we can find the right OPP via
freq finding helpers.

The OPP core provides support for the platforms to provide config_clks
helpers now, lets use that instead of devm_pm_opp_of_add_table_noclk()
to achieve the same result, as the OPP core won't parse the DT's
"opp-hz" property anymore if the clock isn't provided.

Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>