This patch removes the MIC drivers from the kernel tree since the corresponding devices have been discontinued. Removing the dma and char-misc changes in one patch and merging via the char-misc tree is best to avoid any potential build breakage. Cc: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds external DMA controller driver implemented in Socionext UniPhier SoCs. This driver supports DMA_MEMCPY and DMA_SLAVE modes. Since this driver does not support the the way to transfer size unaligned to burst width, 'src_maxburst' or 'dst_maxburst' of dma_slave_config must be 1 to transfer arbitrary size. If transfer size is unaligned to burst size, the transfer isn't started and the driver displays an error message. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1582271550-3403-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds a driver for HiSilicon Kunpeng DMA engine. This DMA engine which is an PCIe iEP offers 30 channels, each channel has a send queue, a complete queue and an interrupt to help to do tasks. This DMA engine can do memory copy between memory blocks or between memory and device buffer. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com> Link: https://lore.kernel.org/r/1579155057-80523-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
The idxd driver introduces the Intel Data Stream Accelerator [1] that will be available on future Intel Xeon CPUs. One of the kernel access point for the driver is through the dmaengine subsystem. It will initially provide the DMA copy service to the kernel. Some of the main functionality introduced with this accelerator are: shared virtual memory (SVM) support, and descriptor submission using Intel CPU instructions movdir64b and enqcmds. There will be additional accelerator devices that share the same driver with variations to capabilities. This commit introduces the probe and initialization component of the driver. [1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some PLX Switches can expose DMA engines via extra PCI functions on the upstream port. Each function will have one DMA channel. This patch is just the core PCI driver skeleton and dma engine registration. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20200103212021.2881-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add PDMA driver, sf-pdma, to enable DMA engine on HiFive Unleashed Rev A00 board. - Implement dmaengine APIs, support MEM_TO_MEM async copy. - Tested by DMA Test client - Supports 4 channels DMA, each channel has 1 done and 1 err interrupt connected to platform-level interrupt controller (PLIC). - Depends on DMA_ENGINE and DMA_VIRTUAL_CHANNELS The datasheet is here: https://static.dev.sifive.com/FU540-C000-v1.0.pdf Follow the DMAengine controller doc, "./Documentation/driver-api/dmaengine/provider.rst" to implement DMA engine. And use the dma test client in doc, "./Documentation/driver-api/dmaengine/dmatest.rst", to test. Each DMA channel has separate HW regs and support done and error ISRs. 4 channels share 1 done and 1 err ISRs. There's no expander/arbitrator in DMA HW. ------ ------ | |--< done 23 >--|ch 0| | |--< err 24 >--| | (dma0chan0) | | ------ | | ------ | |--< done 25 >--|ch 1| | |--< err 26 >--| | (dma0chan1) |PLIC| ------ | | ------ | |--< done 27 >--|ch 2| | |--< err 28 >--| | (dma0chan2) | | ------ | | ------ | |--< done 29 >--|ch 3| | |--< err 30 >--| | (dma0chan3) ------ ------ Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191107084955.7580-4-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Driver for Socionext Milbeaut XDMAC controller. The controller only supports Mem-To-Mem transfers over upto 8 configurable channels. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033219.14713-1-jassisinghbrar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Driver for Socionext Milbeaut HDMAC controller. The controller has upto 8 floating channels, that need a predefined slave-id to work from a set of slaves. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033359.14925-1-jassisinghbrar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
DPPA2(Data Path Acceleration Architecture 2) qDMA supports virtualized channel by allowing DMA jobs to be enqueued into different work queues. Core can initiate a DMA transaction by preparing a frame descriptor(FD) for each DMA job and enqueuing this job through a hardware portal. DPAA2 components can also prepare a FD and enqueue a DMA job through a hardware portal. The qDMA prefetches DMA jobs through DPAA2 hardware portal. It then schedules and dispatches to internal DMA hardware engines, which generate read and write requests. Both qDMA source data and destination data can be either contiguous or non-contiguous using one or more scatter/gather tables. The qDMA supports global bandwidth flow control where all DMA transactions are stalled if the bandwidth threshold has been reached. Also supported are transaction based read throttling. Add NXP dppa2 qDMA to support some of Layerscape SoCs. such as: LS1088A, LS208xA, LX2, etc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20190930020440.7754-2-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
The newer and better JZ4780 driver is now used to provide DMA functionality on the JZ4740. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com>