linux-toradex.git/drivers/dma/dw/platform.c, branch v4.18 Linux kernel for Apalis and Colibri modules dmaengine: dw: simplify getting .drvdata 2018-04-22T06:20:56+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2018-04-19T14:05:38+00:00 83ff13235fb3e9c10401f457df27f67bf3b389af We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> 
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: DW DMAC: Handle return value of clk_prepare_enable 2017-05-24T04:25:17+00:00 Arvind Yadav arvind.yadav.cs@gmail.com 2017-05-22T10:31:48+00:00 702fce05f5ad0e2af2c00d5ef41356ffdd4a3a56 clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: dw: register IRQ and DMA pool with instance ID 2017-01-25T06:21:39+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2017-01-17T11:57:26+00:00 08d62f58aa2587132a930afbe8664379b430e2dd It is really useful not only for debugging to have an IRQ line and DMA pool labeled with driver and its instance ID. Do this for DesignWare DMA driver. All current users of this IP would be enhanced later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
It is really useful not only for debugging to have an IRQ line and DMA
pool labeled with driver and its instance ID. Do this for DesignWare DMA
driver.

All current users of this IP would be enhanced later on.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: DW DMAC: add multi-block property to device tree 2016-11-30T03:27:50+00:00 Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com 2016-11-25T14:59:07+00:00 bd2c6636cc59c4626a04d9918953a107f88eaff9 Several versions of DW DMAC have multi block transfers hardware support. Hardware support of multi block transfers is disabled by default if we use DT to configure DMAC and software emulation of multi block transfers used instead. Add multi-block property, so it is possible to enable hardware multi block transfers (if present) via DT. Switch from per device is_nollp variable to multi_block array to be able enable/disable multi block transfers separately per channel. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
Several versions of DW DMAC have multi block transfers hardware
support. Hardware support of multi block transfers is disabled
by default if we use DT to configure DMAC and software emulation
of multi block transfers used instead.
Add multi-block property, so it is possible to enable hardware
multi block transfers (if present) via DT.

Switch from per device is_nollp variable to multi_block array
to be able enable/disable multi block transfers separately per
channel.

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: DW DMAC: enable memory-to-memory transfers support 2016-11-30T03:27:17+00:00 Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com 2016-11-25T14:59:06+00:00 258f2277a93fe0e3cdac275264d275c526170db6 All known devices, which use DT for configuration, support memory-to-memory transfers. So enable it by default, if we read configuration from DT. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
All known devices, which use DT for configuration, support
memory-to-memory transfers. So enable it by default, if we read
configuration from DT.

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: dw: pass platform data via struct dw_dma_chip 2016-05-02T10:01:05+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-04-27T11:15:40+00:00 3a14c66d43d018baed96ceb74f9ab548878c09b8 We pass struct dw_dma_chip to dw_dma_probe() anyway, thus we may use it to pass a platform data as well. While here, constify the source of the platform data. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
We pass struct dw_dma_chip to dw_dma_probe() anyway, thus we may use it to
pass a platform data as well.

While here, constify the source of the platform data.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: dw: keep entire platform data in struct dw_dma 2016-05-02T10:01:05+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-04-27T11:15:39+00:00 161c3d04aeca8a5bfffe3902786bdf0ccd8575c0 Keep the entire platform data in the struct dw_dma. It makes the driver a bit cleaner. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
Keep the entire platform data in the struct dw_dma.
It makes the driver a bit cleaner.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: dw: revisit data_width property 2016-05-02T10:00:47+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-04-27T11:15:38+00:00 2e65060e803e046fc9b5ed0107494a452424845e There several changes are done here: - Convert the property to be in bytes Besides that this is a common practice for such property, the use of a value in bytes much more convenient than handling the encoded one. - Rename data_width to data-width in the device tree bindings The change leaves the support for the old format as well just in case someone will use a newer kernel with an old device tree blob. - While here, replace dwc_fast_ffs() by __ffs() Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
There several changes are done here:

- Convert the property to be in bytes

  Besides that this is a common practice for such property, the use of a value
  in bytes much more convenient than handling the encoded one.

- Rename data_width to data-width in the device tree bindings

  The change leaves the support for the old format as well just in case someone
  will use a newer kernel with an old device tree blob.

- While here, replace dwc_fast_ffs() by __ffs()

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: dw: platform: check nr_masters to be non-zero 2016-05-02T10:00:25+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-04-27T11:15:37+00:00 969f750fc63d3fd2f26eceedcdeca5878b785b2e The value of nr_masters equal to 0 is invalid since this DMA controller has to have at least one master. Check this before we proceed with the rest of properties. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
The value of nr_masters equal to 0 is invalid since this DMA controller has to
have at least one master.

Check this before we proceed with the rest of properties.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: dw: rename masters to reflect actual topology 2016-04-13T16:06:09+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2016-03-18T14:24:41+00:00 c422025c185fb2bb28df65b1bbed7953480c7f87 The source and destination masters are reflecting buses or their layers to where the different devices can be connected. The patch changes the master names to reflect which one is related to which independently on the transfer direction. The outcome of the change is that the memory data width is now always limited by a data width of the master which is dedicated to communicate to memory. The patch will not break anything since all current users have the same data width for all masters. Though it would be nice to revisit avr32 platforms to check what is the actual hardware topology in use there. It seems that it has one bus and two masters on it as stated by Table 8-2, that's why everything works independently on the master in use. The purpose of the sequential patch is to fix the driver for configuration of more than one bus. The change is done in the assumption that src_master and dst_master are reflecting a connection to the memory and peripheral correspondently on avr32 and otherwise on the rest. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
The source and destination masters are reflecting buses or their layers to
where the different devices can be connected. The patch changes the master
names to reflect which one is related to which independently on the transfer
direction.

The outcome of the change is that the memory data width is now always limited
by a data width of the master which is dedicated to communicate to memory.

The patch will not break anything since all current users have the same data
width for all masters. Though it would be nice to revisit avr32 platforms to
check what is the actual hardware topology in use there. It seems that it has
one bus and two masters on it as stated by Table 8-2, that's why everything
works independently on the master in use. The purpose of the sequential patch
is to fix the driver for configuration of more than one bus.

The change is done in the assumption that src_master and dst_master are
reflecting a connection to the memory and peripheral correspondently on avr32
and otherwise on the rest.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>