linux-toradex.git/drivers/dma/xilinx, branch v5.14 Linux kernel for Apalis and Colibri modules dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers 2021-07-14T05:09:34+00:00 Adrian Larumbe adrian.martinezlarumbe@imgtec.com 2021-07-06T23:43:38+00:00 7dd2dd4ff9f3abda601f22b9d01441a0869d20d7 When user calls dmaengine_terminate_sync, the driver will clean up any remaining descriptors for all the pending or active transfers that had previously been submitted. However, this might happen whilst the tasklet is invoking the DMA callback for the last finished transfer, so by the time it returns and takes over the channel's spinlock, the list of completed descriptors it was traversing is no longer valid. This leads to a read-after-free situation. Fix it by signalling whether a user-triggered termination has happened by means of a boolean variable. Signed-off-by: Adrian Larumbe <adrian.martinezlarumbe@imgtec.com> Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgtec.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
When user calls dmaengine_terminate_sync, the driver will clean up any
remaining descriptors for all the pending or active transfers that had
previously been submitted. However, this might happen whilst the tasklet is
invoking the DMA callback for the last finished transfer, so by the time it
returns and takes over the channel's spinlock, the list of completed
descriptors it was traversing is no longer valid. This leads to a
read-after-free situation.

Fix it by signalling whether a user-triggered termination has happened by
means of a boolean variable.

Signed-off-by: Adrian Larumbe <adrian.martinezlarumbe@imgtec.com>
Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgtec.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine 2021-07-05T19:05:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-07-05T19:05:13+00:00 18ef082713ad1104c32cd17a15abdc3f43c9b28a Pull dmaengine updates from Vinod Koul: "This time around we have a smaller pull request than usual and this includes code removal, so should be good! New drivers/devices - Support for QCOM SM8250 GPI DMA - removal of shdma-of driver and binding Updates: - arm-pl08x yaml binding move - altera-msgdma gained DT support - removal of imx-sdma platform data support - idxd and xilinx driver updates" * tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits) dmaengine: imx-sdma: Remove platform data header dmaengine: xilinx: dpdma: Fix spacing around addr[i-1] dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t dmaengine: altera-msgdma: add OF support MAINTAINERS: add entry for Altera mSGDMA dt-bindings: dma: add schema for altera-msgdma dmaengine: xilinx: dpdma: fix kernel-doc dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy() dmaengine: sh: Remove unused shdma-of driver dt-bindings: dmaengine: Remove SHDMA Device Tree bindings dmaengine: qcom: gpi: Add SM8250 compatible dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors dmaengine: hsu: Account transferred bytes dmaengine: Move kdoc description of struct dma_chan_percpu closer to it dmaengine: xilinx: dpdma: Print debug message when losing vsync race dmaengine: xilinx: dpdma: Print channel number in kernel log messages dt-bindings: dma: convert arm-pl08x to yaml dmaengine: idxd: remove devm allocation for idxd->int_handles ... 
Pull dmaengine updates from Vinod Koul:
 "This time around we have a smaller pull request than usual and this
  includes code removal, so should be good!

  New drivers/devices
   - Support for QCOM SM8250 GPI DMA
   - removal of shdma-of driver and binding

  Updates:
   - arm-pl08x yaml binding move
   - altera-msgdma gained DT support
   - removal of imx-sdma platform data support
   - idxd and xilinx driver updates"

* tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits)
  dmaengine: imx-sdma: Remove platform data header
  dmaengine: xilinx: dpdma: Fix spacing around addr[i-1]
  dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t
  dmaengine: altera-msgdma: add OF support
  MAINTAINERS: add entry for Altera mSGDMA
  dt-bindings: dma: add schema for altera-msgdma
  dmaengine: xilinx: dpdma: fix kernel-doc
  dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy()
  dmaengine: sh: Remove unused shdma-of driver
  dt-bindings: dmaengine: Remove SHDMA Device Tree bindings
  dmaengine: qcom: gpi: Add SM8250 compatible
  dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250
  dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail
  dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors
  dmaengine: hsu: Account transferred bytes
  dmaengine: Move kdoc description of struct dma_chan_percpu closer to it
  dmaengine: xilinx: dpdma: Print debug message when losing vsync race
  dmaengine: xilinx: dpdma: Print channel number in kernel log messages
  dt-bindings: dma: convert arm-pl08x to yaml
  dmaengine: idxd: remove devm allocation for idxd->int_handles
  ...
dmaengine: xilinx: dpdma: Fix spacing around addr[i-1] 2021-06-24T11:10:04+00:00 Michal Simek michal.simek@xilinx.com 2021-06-23T11:07:38+00:00 72cce7dd9f0aa88f82a5612e7d4f9993c34d0d17 Use proper spacing for array calculation. Issue is reported by checkpatch.pl --strict. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/ef7cde6f793bfa6f3dd0a8898bad13b6407479b0.1624446456.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Use proper spacing for array calculation. Issue is reported by
checkpatch.pl --strict.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/ef7cde6f793bfa6f3dd0a8898bad13b6407479b0.1624446456.git.michal.simek@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t 2021-06-24T11:09:51+00:00 Michal Simek michal.simek@xilinx.com 2021-06-23T11:05:39+00:00 536bc5e6fdabbbfd4cb84a2d3b6c1aad17b44757 Use u32 kernel type instead of uint32_t. Issue is reported by checkpatch.pl --strict. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/9569008794d519b487348bfeafbfd76c5da5755e.1624446336.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Use u32 kernel type instead of uint32_t. Issue is reported by
checkpatch.pl --strict.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/9569008794d519b487348bfeafbfd76c5da5755e.1624446336.git.michal.simek@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: xilinx: dpdma: fix kernel-doc 2021-06-16T10:42:59+00:00 Yang Li yang.lee@linux.alibaba.com 2021-06-09T07:14:53+00:00 ce939833b828dd472b278a9173361c7beaeb5b11 Fix function name in xilinx/xilinx_dpdma.c comment to remove a warning found by kernel-doc. drivers/dma/xilinx/xilinx_dpdma.c:935: warning: expecting prototype for xilinx_dpdma_chan_no_ostand(). Prototype was for xilinx_dpdma_chan_notify_no_ostand() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/1623222893-123227-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Fix function name in xilinx/xilinx_dpdma.c comment to remove
a warning found by kernel-doc.

drivers/dma/xilinx/xilinx_dpdma.c:935: warning: expecting prototype for
xilinx_dpdma_chan_no_ostand(). Prototype was for
xilinx_dpdma_chan_notify_no_ostand() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1623222893-123227-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: xilinx: dpdma: Print debug message when losing vsync race 2021-05-31T04:07:39+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2021-05-20T15:24:19+00:00 4fbf41ce573556a6dc4e684f0d92700cdc883ad3 The hardware retrigger is inherently racy with the vsync interrupt. This isn't an issue as the hardware provides a way to detect a race loss and handle it correctly. When debugging issues related to this, it's useful to get a notification of the race loss. Add a debug message to do so. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Link: https://lore.kernel.org/r/20210520152420.23986-4-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The hardware retrigger is inherently racy with the vsync interrupt. This
isn't an issue as the hardware provides a way to detect a race loss and
handle it correctly. When debugging issues related to this, it's useful
to get a notification of the race loss. Add a debug message to do so.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Link: https://lore.kernel.org/r/20210520152420.23986-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: xilinx: dpdma: Print channel number in kernel log messages 2021-05-31T04:07:39+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2021-05-20T15:24:18+00:00 30211901927a2a504adae2a75f9863962d2d06b0 To ease debugging, add the channel number to all kernel log messages related to a particular channel. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Link: https://lore.kernel.org/r/20210520152420.23986-3-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
To ease debugging, add the channel number to all kernel log messages
related to a particular channel.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Link: https://lore.kernel.org/r/20210520152420.23986-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: xilinx: dpdma: Limit descriptor IDs to 16 bits 2021-05-31T04:07:17+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2021-05-20T15:24:20+00:00 9f007e7b6643799e2a6538a5fe04f51c371c6657 While the descriptor ID is stored in a 32-bit field in the hardware descriptor, only 16 bits are used by the hardware and are reported through the XILINX_DPDMA_CH_DESC_ID register. Failure to handle the wrap-around results in a descriptor ID mismatch after 65536 frames. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Link: https://lore.kernel.org/r/20210520152420.23986-5-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
While the descriptor ID is stored in a 32-bit field in the hardware
descriptor, only 16 bits are used by the hardware and are reported
through the XILINX_DPDMA_CH_DESC_ID register. Failure to handle the
wrap-around results in a descriptor ID mismatch after 65536 frames. Fix
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com>
Link: https://lore.kernel.org/r/20210520152420.23986-5-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc() 2021-05-31T04:03:09+00:00 Yu Kuai yukuai3@huawei.com 2021-05-17T08:18:26+00:00 8982d48af36d2562c0f904736b0fc80efc9f2532 pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210517081826.1564698-4-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20210517081826.1564698-4-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: xilinx: dpdma: initialize registers before request_irq 2021-05-10T16:10:30+00:00 Quanyang Wang quanyang.wang@windriver.com 2021-04-30T06:40:41+00:00 538ea65a9fd1194352a41313bff876b74b5d90c5 In some scenarios (kdump), dpdma hardware irqs has been enabled when calling request_irq in probe function, and then the dpdma irq handler xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at this moment xdev->chan[i] hasn't been initialized. We should ensure the dpdma controller to be in a consistent and clean state before further initialization. So add dpdma_hw_init() to do this. Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts instead of error interrupts. This patch is to fix the kdump kernel crash as below: [ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c [ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed [ 3.704900] Mem abort info: [ 3.704902] ESR = 0x96000005 [ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits [ 3.704907] SET = 0, FnV = 0 [ 3.704912] EA = 0, S1PTW = 0 [ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator [ 3.715585] Data abort info: [ 3.715587] ISV = 0, ISS = 0x00000005 [ 3.715589] CM = 0, WnR = 0 [ 3.715592] [000000000000012c] user address but active_mm is swapper [ 3.715596] Internal error: Oops: 96000005 [#1] SMP [ 3.715599] Modules linked in: [ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77 [ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) [ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--) [ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560 [ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560 [ 3.798089] sp : ffffffc01186bdf0 [ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28 [ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080 [ 3.811996] x25: 0000000008000408 x24: 0000000000000003 [ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740 [ 3.822604] x21: 0000000000000000 x20: 0000000008000408 [ 3.827908] x19: 0000000000000000 x18: 0000000000000010 [ 3.833212] x17: 0000000000000000 x16: 0000000000000000 [ 3.838516] x15: 0000000000000000 x14: ffffffc011291740 [ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d [ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48 [ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268 [ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000 [ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000 [ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000 [ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c [ 3.880948] Call trace: [ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560 [ 3.888079] __handle_irq_event_percpu+0x5c/0x178 [ 3.892774] handle_irq_event_percpu+0x34/0x98 [ 3.897210] handle_irq_event+0x44/0xb8 [ 3.901030] handle_fasteoi_irq+0xd0/0x190 [ 3.905117] generic_handle_irq+0x30/0x48 [ 3.909111] __handle_domain_irq+0x64/0xc0 [ 3.913192] gic_handle_irq+0x78/0xa0 [ 3.916846] el1_irq+0xc4/0x180 [ 3.919982] cpuidle_enter_state+0x134/0x2f8 [ 3.924243] cpuidle_enter+0x38/0x50 [ 3.927810] call_cpuidle+0x1c/0x40 [ 3.931290] do_idle+0x20c/0x270 [ 3.934502] cpu_startup_entry+0x28/0x58 [ 3.938410] rest_init+0xbc/0xcc [ 3.941631] arch_call_rest_init+0x10/0x1c [ 3.945718] start_kernel+0x51c/0x558 Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210430064041.4058180-1-quanyang.wang@windriver.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
In some scenarios (kdump), dpdma hardware irqs has been enabled when
calling request_irq in probe function, and then the dpdma irq handler
xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
this moment xdev->chan[i] hasn't been initialized.

We should ensure the dpdma controller to be in a consistent and
clean state before further initialization. So add dpdma_hw_init()
to do this.

Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts
instead of error interrupts.

This patch is to fix the kdump kernel crash as below:

[    3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
[    3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[    3.704900] Mem abort info:
[    3.704902]   ESR = 0x96000005
[    3.704905]   EC = 0x25: DABT (current EL), IL = 32 bits
[    3.704907]   SET = 0, FnV = 0
[    3.704912]   EA = 0, S1PTW = 0
[    3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
[    3.715585] Data abort info:
[    3.715587]   ISV = 0, ISS = 0x00000005
[    3.715589]   CM = 0, WnR = 0
[    3.715592] [000000000000012c] user address but active_mm is swapper
[    3.715596] Internal error: Oops: 96000005 [#1] SMP
[    3.715599] Modules linked in:
[    3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
[    3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[    3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[    3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
[    3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
[    3.798089] sp : ffffffc01186bdf0
[    3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
[    3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
[    3.811996] x25: 0000000008000408 x24: 0000000000000003
[    3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
[    3.822604] x21: 0000000000000000 x20: 0000000008000408
[    3.827908] x19: 0000000000000000 x18: 0000000000000010
[    3.833212] x17: 0000000000000000 x16: 0000000000000000
[    3.838516] x15: 0000000000000000 x14: ffffffc011291740
[    3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
[    3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
[    3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
[    3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
[    3.865036] x5 : 0000000000000003 x4 : 0000000000000000
[    3.870340] x3 : 0000000000000001 x2 : 0000000000000000
[    3.875644] x1 : 0000000000000000 x0 : 000000000000012c
[    3.880948] Call trace:
[    3.883382]  xilinx_dpdma_irq_handler+0x418/0x560
[    3.888079]  __handle_irq_event_percpu+0x5c/0x178
[    3.892774]  handle_irq_event_percpu+0x34/0x98
[    3.897210]  handle_irq_event+0x44/0xb8
[    3.901030]  handle_fasteoi_irq+0xd0/0x190
[    3.905117]  generic_handle_irq+0x30/0x48
[    3.909111]  __handle_domain_irq+0x64/0xc0
[    3.913192]  gic_handle_irq+0x78/0xa0
[    3.916846]  el1_irq+0xc4/0x180
[    3.919982]  cpuidle_enter_state+0x134/0x2f8
[    3.924243]  cpuidle_enter+0x38/0x50
[    3.927810]  call_cpuidle+0x1c/0x40
[    3.931290]  do_idle+0x20c/0x270
[    3.934502]  cpu_startup_entry+0x28/0x58
[    3.938410]  rest_init+0xbc/0xcc
[    3.941631]  arch_call_rest_init+0x10/0x1c
[    3.945718]  start_kernel+0x51c/0x558

Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210430064041.4058180-1-quanyang.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>