The bitfield dma_inuse is allocated of size dma_requests bits, thus a
valid bit address is from 0 to (dma_requests - 1).
When find_first_zero_bit() fails, it returns dma_requests as invalid
address.
Using such address for the following set_bit() is incorrect and, if
dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer
overflow.
Currently this driver is only used in DT stm32h743.dtsi where a safe value
dma_requests=16 is not triggering the buffer overflow.

Fixed by checking the return value of find_first_zero_bit() _before_
using it.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.

With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

According to R-Car Gen3 Rev.0.80 manual, the DMATCR can be set to
16,777,215 as maximum. So, this patch fixes the max_chunk_size for
safety on all of SoCs. Otherwise, a system may hang if the DMATCR
is set to 0 on R-Car Gen3.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Pull ARM updates from Russell King:

 - StrongARM SA1111 updates to modernise and remove cruft

 - Add StrongARM gpio drivers for board GPIOs

 - Verify size of zImage is what we expect to avoid issues with
   appended DTB

 - nommu updates from Vladimir Murzin

 - page table read-write-execute checking from Jinbum Park

 - Broadcom Brahma-B15 cache updates from Florian Fainelli

 - Avoid failure with kprobes test caused by inappropriately
   placed kprobes

 - Remove __memzero optimisation (which was incorrectly being
   used directly by some drivers)

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
  ARM: 8745/1: get rid of __memzero()
  ARM: 8744/1: don't discard memblock for kexec
  ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag
  ARM: 8742/1: Always use REFCOUNT_FULL
  ARM: 8741/1: B15: fix unused label warnings
  ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array
  ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores
  ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU
  ARM: 8737/1: mm: dump: add checking for writable and executable
  ARM: 8736/1: mm: dump: make the page table dumping seq_file
  ARM: 8735/1: mm: dump: make page table dumping reusable
  ARM: sa1100/neponset: add GPIO drivers for control and modem registers
  ARM: sa1100/assabet: add BCR/BSR GPIO driver
  ARM: 8734/1: mm: idmap: Mark variables as ro_after_init
  ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init
  ARM: 8732/1: NOMMU: Allow userspace to access background MPU region
  ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code
  ARM: 8728/1: B15: Register reboot notifier for KEXEC
  ARM: 8730/1: B15: Add suspend/resume hooks
  ARM: 8726/1: B15: Add CPU hotplug awareness
  ...

Pull dmaengine updates from Vinod Koul:
 "This time is smallish update with updates mainly to drivers:

   - updates to xilinx and zynqmp dma controllers

   - update reside calculation for rcar controller

   - more RSTify fixes for documentation

   - add support for race free transfer termination and updating for
     users for that

   - support for new rev of hidma with addition new APIs to get device
     match data in ACPI/OF

   - random updates to bunch of other drivers"

* tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits)
  dmaengine: dmatest: fix container_of member in dmatest_callback
  dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check
  dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy'
  dmaengine: qcom_hidma: simplify DT resource parsing
  dmaengine: xilinx_dma: Free BD consistent memory
  dmaengine: xilinx_dma: Fix warning variable prev set but not used
  dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma
  dmaengine: doc: format struct fields using monospace
  dmaengine: doc: fix bullet list formatting
  dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
  dmaengine: cppi41: Fix channel queues array size check
  dmaengine: imx-sdma: Add MODULE_FIRMWARE
  dmaengine: xilinx_dma: Fix typos
  dmaengine: xilinx_dma: Differentiate probe based on the ip type
  dmaengine: xilinx_dma: fix style issues from checkpatch
  dmaengine: xilinx_dma: Fix kernel doc warnings
  dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario
  dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma
  dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor
  dmaengine: zynqmp_dma: Fix race condition in the probe
  ...