linux-toradex.git/drivers/dma, branch v4.9.87

dmaengine: fsl-edma: disable clks on all error paths

2018-03-03T09:23:20+00:00

[ Upstream commit 2610acf46b9ed528ec2cacd717bc9d354e452b73 ]

Previously enabled clks are only disabled if clk_prepare_enable() fails.
However, there are other error paths were the previously enabled
clocks are not disabled.

To fix the problem, fsl_disable_clocks() now takes the number of clocks
that shall be disabled + unprepared. For existing calls were all clocks
were already successfully prepared + enabled, DMAMUX_NR is passed to
disable + unprepare all clocks.

In error paths were only some clocks were successfully prepared +
enabled the loop counter is passed, in order to disable + unprepare
all successfully prepared + enabled clocks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Andreas Platschek 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: zx: fix build warning

2018-02-25T10:05:53+00:00

commit 067fdeb2f391bfa071f741a2b3eb74b8ff3785cd upstream.

Fix build warning that related to PAGE_SIZE. The maximum DMA
length has nothing to do with PAGE_SIZE, just use a fix number
for the definition.

drivers/dma/zx_dma.c: In function 'zx_dma_prep_memcpy':
drivers/dma/zx_dma.c:523:8: warning: division by zero [-Wdiv-by-zero]
drivers/dma/zx_dma.c: In function 'zx_dma_prep_slave_sg':
drivers/dma/zx_dma.c:567:11: warning: division by zero [-Wdiv-by-zero]

Signed-off-by: Jun Nie 
Tested-by: Shawn Guo 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: jz4740: disable/unprepare clk if probe fails

2018-02-25T10:05:49+00:00

[ Upstream commit eb9436966fdc84cebdf222952a99898ab46d9bb0 ]

in error path of jz4740_dma_probe(), call clk_disable_unprepare() to clean
up.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 25ce6c35fea0 MIPS: jz4740: Remove custom DMA API
Signed-off-by: Tobias Jordan 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved

2018-02-25T10:05:48+00:00

[ Upstream commit 62a277d43d47e74972de44d33bd3763e31992414 ]

_xt_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _xt_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: 4483320e241c ("dmaengine: Use Pointer xt after NULL check.")
Signed-off-by: Gustavo A. R. Silva 
Acked-by: Ludovic Desroches 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: ioat: Fix error handling path

2018-02-25T10:05:48+00:00

[ Upstream commit 5c9afbda911ce20b3f2181d1e440a0222e1027dd ]

If the last test in 'ioat_dma_self_test()' fails, we must release all
the allocated resources and not just part of them.

Signed-off-by: Christophe JAILLET 
Acked-by: Dave Jiang 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: dmatest: fix container_of member in dmatest_callback

2018-02-17T12:21:12+00:00

commit 66b3bd2356e0a1531c71a3dcf96944621e25c17c upstream.

The type of arg passed to dmatest_callback is struct dmatest_done.
It refers to test_done in struct dmatest_thread, not done_wait.

Fixes: 6f6a23a213be ("dmaengine: dmatest: move callback wait ...")
Signed-off-by: Yang Shunyong 
Acked-by: Adam Wallis 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type

2017-12-20T09:07:27+00:00

[ Upstream commit 288e7560e4d3e259aa28f8f58a8dfe63627a1bf6 ]

The used 0x1f mask is only valid for am335x family of SoC, different family
using this type of crossbar might have different number of electable
events. In case of am43xx family 0x3f mask should have been used for
example.
Instead of trying to handle each family's mask, just use u8 type to store
the mux value since the event offsets are aligned to byte offset.

Fixes: 42dbdcc6bf965 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Signed-off-by: Peter Ujfalusi 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: Fix array index out of bounds warning in __get_unmap_pool()

2017-12-20T09:07:21+00:00

[ Upstream commit 23f963e91fd81f44f6b316b1c24db563354c6be8 ]

This fixes the following warning when building with clang and
CONFIG_DMA_ENGINE_RAID=n :

drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
                return &unmap_pool[2];
                        ^          ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
^
drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
                return &unmap_pool[3];
                        ^          ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {

Signed-off-by: Matthias Kaehlcke 
Reviewed-by: Dan Williams 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: dmatest: move callback wait queue to thread context

2017-12-20T09:07:17+00:00

commit 6f6a23a213be51728502b88741ba6a10cda2441d upstream.

Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
introduced a bug (that is in fact documented by the patch commit text)
that leaves behind a dangling pointer. Since the done_wait structure is
allocated on the stack, future invocations to the DMATEST can produce
undesirable results (e.g., corrupted spinlocks).

Commit a9df21e34b42 ("dmaengine: dmatest: warn user when dma test times
out") attempted to WARN the user that the stack was likely corrupted but
did not fix the actual issue.

This patch fixes the issue by pushing the wait queue and callback
structs into the the thread structure. If a failure occurs due to time,
dmaengine_terminate_all will force the callback to safely call
wake_up_all() without possibility of using a freed pointer.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605
Fixes: adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
Reviewed-by: Sinan Kaya 
Suggested-by: Shunyong Yang 
Signed-off-by: Adam Wallis 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: pl330: fix double lock

2017-12-09T21:01:53+00:00

[ Upstream commit 91539eb1fda2d530d3b268eef542c5414e54bf1a ]

The static bug finder EBA (http://www.iagoabal.eu/eba/) reported the
following double-lock bug:

    Double lock:
    1. spin_lock_irqsave(pch->lock, flags) at pl330_free_chan_resources:2236;
    2. call to function `pl330_release_channel' immediately after;
    3. call to function `dma_pl330_rqcb' in line 1753;
    4. spin_lock_irqsave(pch->lock, flags) at dma_pl330_rqcb:1505.

I have fixed it as suggested by Marek Szyprowski.

First, I have replaced `pch->lock' with `pl330->lock' in functions
`pl330_alloc_chan_resources' and `pl330_free_chan_resources'. This avoids
the double-lock by acquiring a different lock than `dma_pl330_rqcb'.

NOTE that, as a result, `pl330_free_chan_resources' executes
`list_splice_tail_init' on `pch->work_list' under lock `pl330->lock',
whereas in the rest of the code `pch->work_list' is protected by
`pch->lock'. I don't know if this may cause race conditions. Similarly
`pch->cyclic' is written by `pl330_alloc_chan_resources' under
`pl330->lock' but read by `pl330_tx_submit' under `pch->lock'.

Second, I have removed locking from `pl330_request_channel' and
`pl330_release_channel' functions. Function `pl330_request_channel' is
only called from `pl330_alloc_chan_resources', so the lock is already
held. Function `pl330_release_channel' is called from
`pl330_free_chan_resources', which already holds the lock, and from
`pl330_del'. Function `pl330_del' is called in an error path of
`pl330_probe' and at the end of `pl330_remove', but I assume that there
cannot be concurrent accesses to the protected data at those points.

Signed-off-by: Iago Abal 
Reviewed-by: Marek Szyprowski 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman