This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
Pull dmaengine updates from Vinod Koul: "Core: - Add Frank Li as susbstem reviewer to help with reviews New Support: - Mediatek support for Dimensity 6300 and 9200 controller - Qualcomm Kaanapali and Glymur GPI DMA engine - Synopsis DW AXI Agilex5 - Renesas RZ/V2N SoC - Atmel microchip lan9691-dma - Tegra ADMA tegra264 Updates: - sg_nents_for_dma() helper use in subsystem - pm_runtime_mark_last_busy() redundant call update for subsystem - Residue support for xilinx AXIDMA driver - Intel Max SGL Size Support and capabilities for DSA3.0 - AXI dma larger than 32bits address support" * tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits) dmaengine: add Frank Li as reviewer dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16 dmaengine: fsl-edma: don't explicitly disable clocks in .remove() dmaengine: xilinx: xdma: use sg_nents_for_dma() helper dmaengine: sh: use sg_nents_for_dma() helper dmaengine: sa11x0: use sg_nents_for_dma() helper dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper dmaengine: qcom: adm: use sg_nents_for_dma() helper dmaengine: pxa-dma: use sg_nents_for_dma() helper dmaengine: lgm: use sg_nents_for_dma() helper dmaengine: k3dma: use sg_nents_for_dma() helper dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper dmaengine: bcm2835-dma: use sg_nents_for_dma() helper dmaengine: axi-dmac: use sg_nents_for_dma() helper dmaengine: altera-msgdma: use sg_nents_for_dma() helper scatterlist: introduce sg_nents_for_dma() helper dmaengine: idxd: Add Max SGL Size Support for DSA3.0 dmaengine: idxd: Expose DSA3.0 capabilities through sysfs dmaengine: sh: rz-dmac: Make channel irq local dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081 ...
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove().
Fixes: a9903de3aa16 ("dmaengine: fsl-edma: refactor using devm_clk_get_enabled")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-fsl-edma-clock-removal-v1-1-2025b49e7bcc@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260109-of-for-each-compatible-scoped-v3-10-c22fa2c0749a@oss.qualcomm.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,admac" anymore [1]. Use
"apple,t8103-admac" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Cc: stable@vger.kernel.org
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20251231-apple-admac-t8103-base-compat-v1-1-ec24a3708f76@jannau.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource.
Fixes: 7bedaa553760 ("dmaengine: add OMAP DMA engine driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>