<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/dpll, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>Merge tag 'net-7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net</title>
<updated>2026-11-12T20:26:14+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-11-12T20:26:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7e1392a42ea288d70a266f6553fe06f57f8647ea'/>
<id>7e1392a42ea288d70a266f6553fe06f57f8647ea</id>
<content type='text'>
Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wireless and bluetooth.

  Previous releases - regressions:

   - tcp: rate limit receive queue collapsing

   - raw: fix ICMP unreachable sent when receive queue is full

   - eth: bnxt_en: take RTNL before netif_close() when aborting FW reset

  Previous releases - always broken:

   - tcp:
       - bound snd_cwnd_clamp to TCP_MAX_SND_CWND
       - number of fixes for TCP Fast Open

   - gro:
       - invalidate frag0 after a pull
       - avoid parsing headers from shared fragments

   - cipso: stop modifying live ip_options_rcu

   - udp: do not use a cross-family sk_rx_dst in early demux

   - fou: gue: check IP version of held packets for direct IP
     encapsulation

   - skbuff: preserve fclone lifetime when freeing stolen heads

   - eth:
       - mlx5e:
           - fix crashes on queue stats access to queues without stats
           - SHAMPO, disable end padding when relaxed ordering is
      - ena: keep the RX buffer mapped if skb allocation fails"

* tag 'net-7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (227 commits)
  selftests: net: add a test for NSH GSO
  nsh: limit recursion in nsh_gso_segment()
  selftests: tls: Cover the cap on consecutive empty records
  selftests: tls: Extend coverage for zero-length records
  selftests: tls: Skip the zero_len tests when TLS is unavailable
  tls: Consume empty data records in tls_sw_splice_read()
  tls: Break the connection after a burst of empty data records
  net: phy: c45: select BASE-T1 type for the forced speed
  net/mlx5e: Fix false WARN_ON_ONCE in flow steering cleanup on RX init failure
  net/mlx5e: IPsec, don't match upper proto selectors in crypto offload TX
  tcp: fix request_sock use-after-free during Fast Open accept()
  net: usb: cdc_ncm: don't underflow the NDP room check
  net: netns: fix INT_MAX nsid cleanup
  amt: use ipv6_hdr() in amt_mldv1_leave_handler()
  af_unix: Inherit SO_INQ in unix_stream_connect()
  tcp: Pass req-&gt;rsk_listener to inet_csk_reqsk_queue_drop() in tcp_check_req().
  mailmap: add entries for Hangbin Liu
  net: virtio: validate outer protocol of UDP tunnel GSO packets
  tun: clear stale skb-&gt;protocol of NAPI frags skbs
  net: virtio: fix UDP tunnel GSO header of VLAN tagged packets
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wireless and bluetooth.

  Previous releases - regressions:

   - tcp: rate limit receive queue collapsing

   - raw: fix ICMP unreachable sent when receive queue is full

   - eth: bnxt_en: take RTNL before netif_close() when aborting FW reset

  Previous releases - always broken:

   - tcp:
       - bound snd_cwnd_clamp to TCP_MAX_SND_CWND
       - number of fixes for TCP Fast Open

   - gro:
       - invalidate frag0 after a pull
       - avoid parsing headers from shared fragments

   - cipso: stop modifying live ip_options_rcu

   - udp: do not use a cross-family sk_rx_dst in early demux

   - fou: gue: check IP version of held packets for direct IP
     encapsulation

   - skbuff: preserve fclone lifetime when freeing stolen heads

   - eth:
       - mlx5e:
           - fix crashes on queue stats access to queues without stats
           - SHAMPO, disable end padding when relaxed ordering is
      - ena: keep the RX buffer mapped if skb allocation fails"

* tag 'net-7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (227 commits)
  selftests: net: add a test for NSH GSO
  nsh: limit recursion in nsh_gso_segment()
  selftests: tls: Cover the cap on consecutive empty records
  selftests: tls: Extend coverage for zero-length records
  selftests: tls: Skip the zero_len tests when TLS is unavailable
  tls: Consume empty data records in tls_sw_splice_read()
  tls: Break the connection after a burst of empty data records
  net: phy: c45: select BASE-T1 type for the forced speed
  net/mlx5e: Fix false WARN_ON_ONCE in flow steering cleanup on RX init failure
  net/mlx5e: IPsec, don't match upper proto selectors in crypto offload TX
  tcp: fix request_sock use-after-free during Fast Open accept()
  net: usb: cdc_ncm: don't underflow the NDP room check
  net: netns: fix INT_MAX nsid cleanup
  amt: use ipv6_hdr() in amt_mldv1_leave_handler()
  af_unix: Inherit SO_INQ in unix_stream_connect()
  tcp: Pass req-&gt;rsk_listener to inet_csk_reqsk_queue_drop() in tcp_check_req().
  mailmap: add entries for Hangbin Liu
  net: virtio: validate outer protocol of UDP tunnel GSO packets
  tun: clear stale skb-&gt;protocol of NAPI frags skbs
  net: virtio: fix UDP tunnel GSO header of VLAN tagged packets
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>dpll: notify about a reference sync pair only if it was added</title>
<updated>2026-11-10T21:58:58+00:00</updated>
<author>
<name>Ivan Vecera</name>
<email>ivecera@redhat.com</email>
</author>
<published>2026-11-05T13:11:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7a3837929d049dac1f931620f30b100993ce2594'/>
<id>7a3837929d049dac1f931620f30b100993ce2594</id>
<content type='text'>
dpll_pin_ref_sync_pair_add() sends a pin change notification even when
xa_insert() fails and nothing has changed. zl3073x gets -EBUSY when
another channel has already added the same pair and ignores it, so user
space is notified about a change that did not happen.

Send the notification only after a successful insert.

Found by code review. Reproduced on a ZL30732A board with kprobes on
dpll_pin_ref_sync_pair_add() and __dpll_pin_change_ntf(): loading the
driver adds one pair twice and the add failing with -EBUSY sends a
notification. With this patch it does not, and the successful add still
does. A test module adding one pair twice shows the same on the monitor
group.

Fixes: 58256a26bfb3 ("dpll: add reference sync get/set")
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Reviewed-by: Vadim Fedorenko &lt;vadim.fedorenko@linux.dev&gt;
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Link: https://patch.msgid.link/20261105131145.1010406-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
dpll_pin_ref_sync_pair_add() sends a pin change notification even when
xa_insert() fails and nothing has changed. zl3073x gets -EBUSY when
another channel has already added the same pair and ignores it, so user
space is notified about a change that did not happen.

Send the notification only after a successful insert.

Found by code review. Reproduced on a ZL30732A board with kprobes on
dpll_pin_ref_sync_pair_add() and __dpll_pin_change_ntf(): loading the
driver adds one pair twice and the add failing with -EBUSY sends a
notification. With this patch it does not, and the successful add still
does. A test module adding one pair twice shows the same on the monitor
group.

Fixes: 58256a26bfb3 ("dpll: add reference sync get/set")
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Reviewed-by: Vadim Fedorenko &lt;vadim.fedorenko@linux.dev&gt;
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Link: https://patch.msgid.link/20261105131145.1010406-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>treewide: refresh kmalloc_obj() conversions</title>
<updated>2026-11-06T05:55:37+00:00</updated>
<author>
<name>Kees Cook</name>
<email>kees+treewide@kernel.org</email>
</author>
<published>2026-10-29T06:08:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0af298e62e5cff4ebf9bec47b8711177a7e2f115'/>
<id>0af298e62e5cff4ebf9bec47b8711177a7e2f115</id>
<content type='text'>
Refresh the tree with run of the existing Coccinelle rules in
scripts/coccinelle/api/kmalloc_objs.cocci, now that they also convert
arrays of multi-byte integers.

The conversions break down as:

	435	kzalloc_objs()
	169	kmalloc_objs()
	 52	kvzalloc_objs()
	 47	kzalloc_obj()
	 42	kvmalloc_objs()
	  8	kmalloc_obj()
	  2	kzalloc_flex()
	  2	kvmalloc_flex()

and 37 existing kmalloc_obj() family calls drop a redundant GFP_KERNEL.

Build tested with allmodconfig on x86_64 with GCC 16.2.0, and, together
with the devm_kmalloc_obj() conversion that follows, on x86_64, arm64,
i386, arm, riscv, s390, m68k, mips, parisc, sparc, loongarch, arc,
xtensa, and openrisc with GCC 16.2.0 with no new warnings.

Signed-off-by: Kees Cook &lt;kees+treewide@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Refresh the tree with run of the existing Coccinelle rules in
scripts/coccinelle/api/kmalloc_objs.cocci, now that they also convert
arrays of multi-byte integers.

The conversions break down as:

	435	kzalloc_objs()
	169	kmalloc_objs()
	 52	kvzalloc_objs()
	 47	kzalloc_obj()
	 42	kvmalloc_objs()
	  8	kmalloc_obj()
	  2	kzalloc_flex()
	  2	kvmalloc_flex()

and 37 existing kmalloc_obj() family calls drop a redundant GFP_KERNEL.

Build tested with allmodconfig on x86_64 with GCC 16.2.0, and, together
with the devm_kmalloc_obj() conversion that follows, on x86_64, arm64,
i386, arm, riscv, s390, m68k, mips, parisc, sparc, loongarch, arc,
xtensa, and openrisc with GCC 16.2.0 with no new warnings.

Signed-off-by: Kees Cook &lt;kees+treewide@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dpll: zl3073x: notify sibling pin when shared output config changes</title>
<updated>2026-10-17T01:01:14+00:00</updated>
<author>
<name>Ivan Vecera</name>
<email>ivecera@redhat.com</email>
</author>
<published>2026-10-11T06:12:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0748e473b65a8c8690e250cdf7cc4f5a93252493'/>
<id>0748e473b65a8c8690e250cdf7cc4f5a93252493</id>
<content type='text'>
The P-pin and N-pin of an output share the divisor, clock type, eSync
and phase compensation registers (outside N-divided mode). Changing
them through one pin changes the other pin too, but only the requested
pin gets a change notification.

Add zl3073x_dpll_output_pin_sibling_get() and notify the sibling from
frequency_set(), esync_set() and phase_adjust_set(). The notification
re-enters the pin get callbacks, so it has to be sent after
zldpll-&gt;lock is released and the callbacks switch from guard(mutex)
to explicit unlocking.

To always find a registered sibling, add a pin to zldpll-&gt;pins before
dpll_pin_register() and remove it only after dpll_pin_unregister(),
both under zldpll-&gt;lock. A pin that is on the list but not registered
gets no netlink notification, as dpll_pin_event_send() skips such
pins, and the only in-tree DPLL notifier ignores DPLL_PIN_CHANGED.

Found by code inspection, not triggered at runtime.

Fixes: 634ca2cb06d2 ("dpll: zl3073x: Add support to get/set esync on pins")
Fixes: ce26d7ca50a5 ("dpll: zl3073x: Add support to get/set frequency on pins")
Fixes: 6287262f761e ("dpll: zl3073x: Add support to adjust phase")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-6-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The P-pin and N-pin of an output share the divisor, clock type, eSync
and phase compensation registers (outside N-divided mode). Changing
them through one pin changes the other pin too, but only the requested
pin gets a change notification.

Add zl3073x_dpll_output_pin_sibling_get() and notify the sibling from
frequency_set(), esync_set() and phase_adjust_set(). The notification
re-enters the pin get callbacks, so it has to be sent after
zldpll-&gt;lock is released and the callbacks switch from guard(mutex)
to explicit unlocking.

To always find a registered sibling, add a pin to zldpll-&gt;pins before
dpll_pin_register() and remove it only after dpll_pin_unregister(),
both under zldpll-&gt;lock. A pin that is on the list but not registered
gets no netlink notification, as dpll_pin_event_send() skips such
pins, and the only in-tree DPLL notifier ignores DPLL_PIN_CHANGED.

Found by code inspection, not triggered at runtime.

Fixes: 634ca2cb06d2 ("dpll: zl3073x: Add support to get/set esync on pins")
Fixes: ce26d7ca50a5 ("dpll: zl3073x: Add support to get/set frequency on pins")
Fixes: 6287262f761e ("dpll: zl3073x: Add support to adjust phase")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-6-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dpll: zl3073x: make embedded sync follow the output carrier frequency</title>
<updated>2026-10-17T01:01:14+00:00</updated>
<author>
<name>Ivan Vecera</name>
<email>ivecera@redhat.com</email>
</author>
<published>2026-10-11T06:12:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=bf6f105f2cb6477e36a9312477d0aa32a43aa13d'/>
<id>bf6f105f2cb6477e36a9312477d0aa32a43aa13d</id>
<content type='text'>
The eSync period and width are relative to the output carrier, but
changing the output frequency did not update them, so eSync ran at
a wrong frequency and duty cycle. For a 1 Hz carrier esync_get()
returns -EOPNOTSUPP, so eSync left enabled could not be disabled.

Factor out zl3073x_out_esync_{is_enabled,enable,disable}() helpers
and use them in frequency_set() to recompute the eSync period and
width for the new carrier, or to disable eSync for a 1 Hz carrier.

Also compute the reported pulse width in 64 bits, as
50 * esync_n_width overflows u32 for low carrier frequencies.

Hit during development, confirmed on an oscilloscope.

Fixes: ce26d7ca50a5 ("dpll: zl3073x: Add support to get/set frequency on pins")
Fixes: 634ca2cb06d2 ("dpll: zl3073x: Add support to get/set esync on pins")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The eSync period and width are relative to the output carrier, but
changing the output frequency did not update them, so eSync ran at
a wrong frequency and duty cycle. For a 1 Hz carrier esync_get()
returns -EOPNOTSUPP, so eSync left enabled could not be disabled.

Factor out zl3073x_out_esync_{is_enabled,enable,disable}() helpers
and use them in frequency_set() to recompute the eSync period and
width for the new carrier, or to disable eSync for a 1 Hz carrier.

Also compute the reported pulse width in 64 bits, as
50 * esync_n_width overflows u32 for low carrier frequencies.

Hit during development, confirmed on an oscilloscope.

Fixes: ce26d7ca50a5 ("dpll: zl3073x: Add support to get/set frequency on pins")
Fixes: 634ca2cb06d2 ("dpll: zl3073x: Add support to get/set esync on pins")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dpll: zl3073x: reject output frequencies with too small divisor</title>
<updated>2026-10-17T01:01:14+00:00</updated>
<author>
<name>Ivan Vecera</name>
<email>ivecera@redhat.com</email>
</author>
<published>2026-10-11T06:12:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=456027325c9cd2be94229687f2c412ae6f351bd8'/>
<id>456027325c9cd2be94229687f2c412ae6f351bd8</id>
<content type='text'>
The output divisor has to be at least 2: a divisor of 1 bypasses the
divider and the hardware then ignores the pulse width and eSync
registers. For the N-pin of an N-divided output the N divider (&gt;= 2)
applies on top, so its effective divisor has to be at least 4.

zl3073x_pin_check_freq() only checked that the frequency divides the
synth frequency. Require also the minimum divisor. For N-divided
outputs this is necessary but not sufficient, the rest is checked by
the frequency set callback.

Hit during development: an N-pin frequency that needs an N divider of 1
was accepted, and with esync_n_period = 1 the N-pin produced no output
on an oscilloscope.

Fixes: a99a9f0ebdaa ("dpll: zl3073x: Read DPLL types and pin properties from system firmware")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The output divisor has to be at least 2: a divisor of 1 bypasses the
divider and the hardware then ignores the pulse width and eSync
registers. For the N-pin of an N-divided output the N divider (&gt;= 2)
applies on top, so its effective divisor has to be at least 4.

zl3073x_pin_check_freq() only checked that the frequency divides the
synth frequency. Require also the minimum divisor. For N-divided
outputs this is necessary but not sufficient, the rest is checked by
the frequency set callback.

Hit during development: an N-pin frequency that needs an N divider of 1
was accepted, and with esync_n_period = 1 the N-pin produced no output
on an oscilloscope.

Fixes: a99a9f0ebdaa ("dpll: zl3073x: Read DPLL types and pin properties from system firmware")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dpll: zl3073x: reject inexact frequencies for N-divided outputs</title>
<updated>2026-10-17T01:01:14+00:00</updated>
<author>
<name>Ivan Vecera</name>
<email>ivecera@redhat.com</email>
</author>
<published>2026-10-11T06:12:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f8993627d3101de0833022ac88083ac0147aae7d'/>
<id>f8993627d3101de0833022ac88083ac0147aae7d</id>
<content type='text'>
For N-divided outputs the P-pin and N-pin share the output divisor and
the N-pin frequency is synth_freq / (div * esync_n_period). The frequency
set helper computed esync_n_period with a truncating division and only
rejected a zero result, so a frequency that does not divide evenly was
silently rounded. Setting the P-pin could then shift the N-pin frequency
too (e.g. 600 MHz synth, div=60, period=10 gives P=10 MHz, N=1 MHz;
setting P to 2.5 MHz moves N to 1.25 MHz). When setting the P-pin, the
product esync_n_period * div used for the rescale was computed in 32
bits and could wrap, so a wrong N divider was stored for low N-pin
frequencies.

Require esync_n_period &gt;= 2 so the N-pin frequency stays below the P-pin
one, reject a P-pin frequency for which the esync_n_period keeping the
N-pin frequency does not fit into 32 bits, and check the division
remainder and reject the request if it is not exact.

Found by code inspection, not triggered at runtime.

Fixes: ce26d7ca50a5 ("dpll: zl3073x: Add support to get/set frequency on pins")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
For N-divided outputs the P-pin and N-pin share the output divisor and
the N-pin frequency is synth_freq / (div * esync_n_period). The frequency
set helper computed esync_n_period with a truncating division and only
rejected a zero result, so a frequency that does not divide evenly was
silently rounded. Setting the P-pin could then shift the N-pin frequency
too (e.g. 600 MHz synth, div=60, period=10 gives P=10 MHz, N=1 MHz;
setting P to 2.5 MHz moves N to 1.25 MHz). When setting the P-pin, the
product esync_n_period * div used for the rescale was computed in 32
bits and could wrap, so a wrong N divider was stored for low N-pin
frequencies.

Require esync_n_period &gt;= 2 so the N-pin frequency stays below the P-pin
one, reject a P-pin frequency for which the esync_n_period keeping the
N-pin frequency does not fit into 32 bits, and check the division
remainder and reject the request if it is not exact.

Found by code inspection, not triggered at runtime.

Fixes: ce26d7ca50a5 ("dpll: zl3073x: Add support to get/set frequency on pins")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20261011061211.448373-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dpll: zl3073x: do not offer 0 Hz as a supported pin frequency</title>
<updated>2026-10-17T01:01:13+00:00</updated>
<author>
<name>Ivan Vecera</name>
<email>ivecera@redhat.com</email>
</author>
<published>2026-10-11T06:12:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=23171065fb436195981ca32f9e49dcf852dbd018'/>
<id>23171065fb436195981ca32f9e49dcf852dbd018</id>
<content type='text'>
zl3073x_pin_props_get() always adds the current pin frequency to the
supported list without checking it. A sub-Hz frequency reads back as
0 Hz, so 0 Hz can then be requested and the output frequency set
callback divides by zero. A 0 Hz entry in the firmware node is not
rejected either: it is offered for an input pin, and for an output pin
zl3073x_pin_check_freq() divides by it at probe time.

Do not add a 0 Hz current frequency and reject 0 Hz in
zl3073x_pin_check_freq(). If the list ends up empty, do not publish it
at all, as the DPLL core rejects an empty non-NULL list.

Found by code inspection, not triggered at runtime.

Fixes: 85a9aaac4a38 ("dpll: zl3073x: Include current frequency in supported frequencies list")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Fixes: a99a9f0ebdaa ("dpll: zl3073x: Read DPLL types and pin properties from system firmware")
Link: https://patch.msgid.link/20261011061211.448373-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
zl3073x_pin_props_get() always adds the current pin frequency to the
supported list without checking it. A sub-Hz frequency reads back as
0 Hz, so 0 Hz can then be requested and the output frequency set
callback divides by zero. A 0 Hz entry in the firmware node is not
rejected either: it is offered for an input pin, and for an output pin
zl3073x_pin_check_freq() divides by it at probe time.

Do not add a 0 Hz current frequency and reject 0 Hz in
zl3073x_pin_check_freq(). If the list ends up empty, do not publish it
at all, as the DPLL core rejects an empty non-NULL list.

Found by code inspection, not triggered at runtime.

Fixes: 85a9aaac4a38 ("dpll: zl3073x: Include current frequency in supported frequencies list")
Reviewed-by: Petr Oros &lt;poros@redhat.com&gt;
Signed-off-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Fixes: a99a9f0ebdaa ("dpll: zl3073x: Read DPLL types and pin properties from system firmware")
Link: https://patch.msgid.link/20261011061211.448373-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dpll: do not truncate the requested pin frequency before checking it</title>
<updated>2026-09-26T01:14:50+00:00</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2026-09-24T23:12:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7f92b7f381ffa83800bba6d535ac36a764f3abeb'/>
<id>7f92b7f381ffa83800bba6d535ac36a764f3abeb</id>
<content type='text'>
DPLL_A_PIN_FREQUENCY is a u64 on the wire and dpll_pin_freq_set() keeps it
as one, but dpll_pin_is_freq_supported() takes a u32 while the ranges it
compares against are u64. The supported-frequency check therefore only
looks at the low 32 bits, and the full value is what reaches the driver.

Nothing is hitting this today. Reaching it at all needs a pin-set above
U32_MAX, which no sane caller sends, and the outcome is mild: a pin
advertising 10 kHz accepts 0x1_0000_2710, ice narrows it straight back to
10 kHz in ice_dpll_pin_freq_set(), so the hardware still ends up on an
advertised frequency and only the "frequency is not supported by the
device" rejection goes missing. The other direction - a legitimate request
above U32_MAX wrapping out of the pin's range - needs a driver advertising
such a range, and none does; zl3073x_pin_check_freq() refuses one outright.

So this is types rather than a live bug. Widen the check to match the
attribute, the ranges and the driver callback instead of adding a U32_MAX
rejection, so that the second case stays right if such a driver appears.
dpll_pin_esync_set() already keeps u64 throughout its equivalent loop.

Reviewed-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20260924231211.568213-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
DPLL_A_PIN_FREQUENCY is a u64 on the wire and dpll_pin_freq_set() keeps it
as one, but dpll_pin_is_freq_supported() takes a u32 while the ranges it
compares against are u64. The supported-frequency check therefore only
looks at the low 32 bits, and the full value is what reaches the driver.

Nothing is hitting this today. Reaching it at all needs a pin-set above
U32_MAX, which no sane caller sends, and the outcome is mild: a pin
advertising 10 kHz accepts 0x1_0000_2710, ice narrows it straight back to
10 kHz in ice_dpll_pin_freq_set(), so the hardware still ends up on an
advertised frequency and only the "frequency is not supported by the
device" rejection goes missing. The other direction - a legitimate request
above U32_MAX wrapping out of the pin's range - needs a driver advertising
such a range, and none does; zl3073x_pin_check_freq() refuses one outright.

So this is types rather than a live bug. Widen the check to match the
attribute, the ranges and the driver callback instead of adding a U32_MAX
rejection, so that the second case stays right if such a driver appears.
dpll_pin_esync_set() already keeps u64 throughout its equivalent loop.

Reviewed-by: Ivan Vecera &lt;ivecera@redhat.com&gt;
Link: https://patch.msgid.link/20260924231211.568213-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net</title>
<updated>2026-09-24T20:32:50+00:00</updated>
<author>
<name>Jakub Kicinski</name>
<email>kuba@kernel.org</email>
</author>
<published>2026-09-17T21:24:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=42a9fb3382fc2573e92f41d203b095d9a372cfc9'/>
<id>42a9fb3382fc2573e92f41d203b095d9a372cfc9</id>
<content type='text'>
Cross-merge networking fixes after downstream PR (net-7.3-rc5).

Conflicts:

drivers/net/mdio/mdio-realtek-rtl9300.c
  89a8a1eef2d44 ("net: mdio: realtek-rtl9300: fix RTL931x C22 extended page selection")
  cc3cb8db1eef9 ("net: mdio: realtek-rtl9300: Add page tracking")
https://lore.kernel.org/arUZOqy73bE2pp0w@sirena.org.uk

net/8021q/vlan_dev.c
  cd5dd68267c4 ("vlan: ensure sufficient headroom in vlan_dev_hard_header()")
  ca6ff8dd70eb ("vlan: annotate data-races in vlan_dev_priv fields")

Adjacent changes:

net/ipv6/ip6_gre.c
  dd47bcf279f1 ("ip6_gre: Call ip6erspan_tunnel_unlink_md() in ip6erspan_changelink().")
  cce829e2aa1d ("ip6_gre: Protect ip6gre_net.tunnels[][] with mutex.")

drivers/net/ethernet/meta/fbnic/fbnic_txrx.c
  b5d9e9d4d0c1 ("eth: fbnic: use the Rx queue napi pointer to find the napi vector")
  c0aca269ec07 ("eth: fbnic: Make Rx completion coalescing configurable")

drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
  d68acbf93531 ("net: stmmac: selftests: Support running selftests on DSA conduits")
  85ca3292d7a3 ("net: stmmac: Remove ARP offload code")

drivers/net/ethernet/wangxun/libwx/wx_hw.c
  3173cba11701 ("net: libwx: fix races in Tx timestamp handling")
  7042c8c193e5 ("net: libwx: rename wx_pf_flags to wx_flags")

Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Cross-merge networking fixes after downstream PR (net-7.3-rc5).

Conflicts:

drivers/net/mdio/mdio-realtek-rtl9300.c
  89a8a1eef2d44 ("net: mdio: realtek-rtl9300: fix RTL931x C22 extended page selection")
  cc3cb8db1eef9 ("net: mdio: realtek-rtl9300: Add page tracking")
https://lore.kernel.org/arUZOqy73bE2pp0w@sirena.org.uk

net/8021q/vlan_dev.c
  cd5dd68267c4 ("vlan: ensure sufficient headroom in vlan_dev_hard_header()")
  ca6ff8dd70eb ("vlan: annotate data-races in vlan_dev_priv fields")

Adjacent changes:

net/ipv6/ip6_gre.c
  dd47bcf279f1 ("ip6_gre: Call ip6erspan_tunnel_unlink_md() in ip6erspan_changelink().")
  cce829e2aa1d ("ip6_gre: Protect ip6gre_net.tunnels[][] with mutex.")

drivers/net/ethernet/meta/fbnic/fbnic_txrx.c
  b5d9e9d4d0c1 ("eth: fbnic: use the Rx queue napi pointer to find the napi vector")
  c0aca269ec07 ("eth: fbnic: Make Rx completion coalescing configurable")

drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
  d68acbf93531 ("net: stmmac: selftests: Support running selftests on DSA conduits")
  85ca3292d7a3 ("net: stmmac: Remove ARP offload code")

drivers/net/ethernet/wangxun/libwx/wx_hw.c
  3173cba11701 ("net: libwx: fix races in Tx timestamp handling")
  7042c8c193e5 ("net: libwx: rename wx_pf_flags to wx_flags")

Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
