linux-toradex.git/drivers/edac/amd64_edac.h, branch v4.0.9

amd64_edac: Add F15h M60h support

2014-10-30T12:42:48+00:00

This patch adds support for ECC error decoding for F15h M60h processor.
Aside from the usual changes, the patch adds support for some new features
in the processor:
 - DDR4(unbuffered, registered); LRDIMM DDR3 support
   - relevant debug messages have been modified/added to report these
     memory types
 - new dbam_to_cs mappers
   - if (F15h M60h && LRDIMM); we need a 'multiplier' value to find
     cs_size. This multiplier value is obtained from the per-dimm
     DCSM register. So, change the interface to accept a 'cs_mask_nr'
     value to facilitate this calculation
 - switch-casing determine_memory_type()
   - done to cleanse the function of too many if-else statements
     and improve readability
   - This is now called early in read_mc_regs() to cache dram_type

Misc cleanup:
 - amd64_pci_table[] is condensed by using PCI_VDEVICE macro.

Testing details:
Tested the patch by injecting 'ECC' type errors using mce_amd_inj
and error decoding works fine.

Signed-off-by: Aravind Gopalakrishnan 
Link: http://lkml.kernel.org/r/1414617483-4941-1-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Boris: determine_memory_type() cleanups ]
Signed-off-by: Borislav Petkov

amd64_edac: Modify usage of amd64_read_dct_pci_cfg()

2014-09-23T11:16:05+00:00

Rationale behind this change:
 - F2x1xx addresses were stopped from being mapped explicitly to DCT1
   from F15h (OR) onwards. They use _dct[0:1] mechanism to access the
   registers. So we should move away from using address ranges to select
   DCT for these families.
 - On newer processors, the address ranges used to indicate DCT1 (0x140,
   0x1a0) have different meanings than what is assumed currently.

Changes introduced:
 - amd64_read_dct_pci_cfg() now takes in dct value and uses it for
   'selecting the dct'
 - Update usage of the function. Keep in mind that different families
   have specific handling requirements
 - Remove [k8|f10]_read_dct_pci_cfg() as they don't do much different
   from amd64_read_pci_cfg()
   - Move the k8 specific check to amd64_read_pci_cfg
 - Remove f15_read_dct_pci_cfg() and move logic to amd64_read_dct_pci_cfg()
 - Remove now needless .read_dct_pci_cfg

Testing:
 - Tested on Fam 10h; Fam15h Models: 00h, 30h; Fam16h using 'EDAC_DEBUG'
   and mce_amd_inj
 - driver obtains info from F2x registers and caches it in pvt
   structures correctly
 - ECC decoding works fine

Signed-off-by: Aravind Gopalakrishnan 
Link: http://lkml.kernel.org/r/1410799058-3149-1-git-send-email-aravind.gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov

amd64_edac: Add support for newer F16h models

2014-02-27T17:03:16+00:00

Extend ECC decoding support for F16h M30h. Tested on F16h M30h with ECC
turned on using mce_amd_inj module and the patch works fine.

Signed-off-by: Aravind Gopalakrishnan 
Link: http://lkml.kernel.org/r/1392913726-16961-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Tested-by: Arindam Nath 
Acked-by: H. Peter Anvin 
Signed-off-by: Borislav Petkov

bitops: Introduce a more generic BITMASK macro

2013-10-21T22:12:01+00:00

GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.

Signed-off-by: Chen, Gong 
Cc: Borislav Petkov 
Cc: Thomas Winischhofer 
Cc: Jean-Christophe Plagniol-Villard 
Cc: Tomi Valkeinen 
Acked-by: Borislav Petkov 
Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Tony Luck

amd64_edac: Get rid of boot_cpu_data accesses

2013-08-12T14:01:56+00:00

Now that we cache (family, model, stepping) locally, use them instead of
boot_cpu_data.

No functionality change.

Signed-off-by: Borislav Petkov

amd64_edac: Add ECC decoding support for newer F15h models

2013-08-12T14:00:10+00:00

On newer models, support has been included for upto 4 DCT's, however,
only DCT0 and DCT3 are currently configured (cf BKDG Section 2.10).
Also, the routing DRAM Requests algorithm is different for F15h M30h.
Thus it is cleaner to use a brand new function rather than adding quirks
to the more generic f1x_match_to_this_node(). Refer to "2.10.5 DRAM
Routing Requests" in the BKDG for further info.

Tested on Fam15h M30h with ECC turned on using mce_amd_inj facility and
verified to be functionally correct.

While at it, verify if erratum workarounds for E505 and E637 still hold.
From email conversations within AMD, the current status of the errata
is:

      * Erratum 505: fixed in model 0x1, stepping 0x1 and later.
      * Erratum 637: not fixed.

Signed-off-by: Aravind Gopalakrishnan 
[ Cleanups, corrections ]
Signed-off-by: Borislav Petkov

amd64_edac: Add Family 16h support

2013-04-19T10:46:50+00:00

Add code to handle DRAM ECC errors decoding for Fam16h.

Tested on Fam16h with ECC turned on using the mce_amd_inj facility and
works fine.

Signed-off-by: Aravind Gopalakrishnan 
[ Boris: cleanups and clarifications ]
Signed-off-by: Borislav Petkov

amd64_edac: Fix type usage in NB IDs and memory ranges

2013-01-10T15:18:00+00:00

Use appropriate types for northbridge IDs and memory ranges. Mark
immutable data const and keep within compilation unit on related
structures.

Signed-off-by: Daniel J Blueman 
Link: http://lkml.kernel.org/r/1354265060-22956-2-git-send-email-daniel@numascale-asia.com
[Boris: Drop arg change to node_to_amd_nb]
Signed-off-by: Borislav Petkov

x86, AMD, NB: Add multi-domain support

2013-01-10T15:17:58+00:00

Fix get_node_id to match northbridge IDs from the array of detected
ones, allowing multi-server support such as with Numascale's
NumaConnect, renaming to 'amd_get_node_id' for consistency.

Signed-off-by: Daniel J Blueman 
Link: http://lkml.kernel.org/r/1353997932-8475-1-git-send-email-daniel@numascale-asia.com
[Boris: shorten lines to fit 80 cols]
Signed-off-by: Borislav Petkov

amd64_edac: Use DBAM_DIMM macro

2012-11-28T10:46:19+00:00

Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.

Signed-off-by: Borislav Petkov