linux-toradex.git/drivers/edac/i3200_edac.c, branch v4.9.123

move io-64-nonatomic*.h out of asm-generic

2015-10-14T22:21:07+00:00

These are not implementations of default architecture code but helpers
for drivers. Move them to the place they belong to.

Signed-off-by: Christoph Hellwig 
Acked-by: Darren Hart 
Acked-by: Hitoshi Mitake 
Signed-off-by: Arnd Bergmann

Merge tag 'edac_for_3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

2014-12-09T04:17:49+00:00

Pull EDAC updates from Borislav Petkov:
 "EDAC updates all over the place:

   - Enablement for AMD F15h models 0x60 CPUs.  Most notably DDR4 RAM
     support.  Out of tree stuff is adding the required PCI IDs.  From
     Aravind Gopalakrishnan.

   - Enable amd64_edac for 32-bit due to popular demand.  From Tomasz
     Pala.

   - Convert the AMD MCE injection module to debugfs, where it belongs.

   - Misc EDAC cleanups"

* tag 'edac_for_3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, MCE, AMD: Correct formatting of decoded text
  EDAC, mce_amd_inj: Add an injector function
  EDAC, mce_amd_inj: Add hw-injection attributes
  EDAC, mce_amd_inj: Enable direct writes to MCE MSRs
  EDAC, mce_amd_inj: Convert mce_amd_inj module to debugfs
  EDAC: Delete unnecessary check before calling pci_dev_put()
  EDAC, pci_sysfs: remove unneccessary ifdef around entire file
  ghes_edac: Use snprintf() to silence a static checker warning
  amd64_edac: Build module on x86-32
  EDAC, MCE, AMD: Add decoding table for MC6 xec
  amd64_edac: Add F15h M60h support
  {mv64x60,ppc4xx}_edac,: Remove deprecated IRQF_DISABLED
  EDAC: Sync memory types and names
  EDAC: Add DDR3 LRDIMM entries to edac_mem_types
  x86, amd_nb: Add device IDs to NB tables for F15h M60h
  pci_ids: Add PCI device IDs for F15h M60h

EDAC: Delete unnecessary check before calling pci_dev_put()

2014-11-19T15:33:48+00:00

The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test before the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring 
Link: http://lkml.kernel.org/r/546CB20D.4070808@users.sourceforge.net
[ Boris: commit message. ]
Signed-off-by: Borislav Petkov

i3200_edac: Report CE events properly

2014-10-22T20:58:13+00:00

Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED.

Signed-off-by: Jason Baron 
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/d02465b4f30314b390c12c061502eda5e9d29c52.1413405053.git.jbaron@akamai.com
Signed-off-by: Borislav Petkov

i3200_edac: Add a missing pci_disable_device() on the exit path

2014-02-07T10:34:55+00:00

Currently, i3200_edac.c forgets to call pci_disable_device() during a
process of disabling device. This patch adds that call.

The problem was detected by Huqiu Liu.

Reported-by: Huqiu Liu 
Signed-off-by: Hitoshi Mitake 
Link: http://lkml.kernel.org/r/1389587178-10167-1-git-send-email-mitake.hitoshi@gmail.com
Signed-off-by: Borislav Petkov

EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro

2013-12-06T09:23:41+00:00

Currently, there is no other bus that has something like this macro for
their device ids. Thus, DEFINE_PCI_DEVICE_TABLE macro should be removed.

Signed-off-by: Jingoo Han 
Link: http://lkml.kernel.org/r/001c01ceefb3$5724d860$056e8920$%han@samsung.com
[ Boris: swap commit message with better one. ]
Signed-off-by: Borislav Petkov

i3200_edac: Make a local function static

2013-08-09T13:23:02+00:00

This local symbol is used only in this file.
Fix the following sparse warnings:

drivers/edac/i3200_edac.c:264:14: warning: symbol 'i3200_map_mchbar' was not declared. Should it be static?

Signed-off-by: Jingoo Han 
Signed-off-by: Borislav Petkov

i3200_edac: Fix the logic that detects filled memories

2013-02-21T14:06:31+00:00

After running a series of tests on an HP DL320, filled with different
memory sizes, it was noticed that, when filled with just one DIMM
on such hardware, the driver wrongly detects twice the memory, and
thinks that both channels 0 and 1 are filled.

It seems to be partially caused by the BIOS and partially by the driver.

The i3200_edac current logic would be working fine if the BIOS were
disabling the unused second channel when just one DIMM is connected,
in order to do power-saving, as recommended on this chipset's datasheet.

However, the BIOS on this particular machine doesn't do it:

[   16.741421] EDAC DEBUG: how_many_channels: In dual channel mode
[   16.741424] EDAC DEBUG: how_many_channels: 2 DIMMS per channel enabled

So, the driver were assuming that 2 channels are enabled (well, they are,
but the second is unused).

Combined with that, I found two issues at the logic that creates the
EDAC data, that were failing when the two channels are not equally
filled (AFAICT, that happens only when just 1 DIMM is plugged).

The first one is that a 0 at DRB means that nothing is filled. The
driver's logic, however, do some calculation with that.

The second one is that the logic that fills the DIMM data currently
assumes that both channels are equally filled.

I tested the system already with the current configuration and my
patch and it is now working fine. So, for a 2R single DIMM 2Gb memory
at dimm slot 01 (channel 0), it is now displaying:

[   16.741406] EDAC DEBUG: i3200_get_drbs: drb[0][0] = 16, drb[1][0] = 0
[   16.741410] EDAC DEBUG: i3200_get_drbs: drb[0][1] = 32, drb[1][1] = 0
[   16.741413] EDAC DEBUG: i3200_get_drbs: drb[0][2] = 32, drb[1][2] = 0
[   16.741416] EDAC DEBUG: i3200_get_drbs: drb[0][3] = 32, drb[1][3] = 0
...
[   16.741896] EDAC DEBUG: i3200_probe1: csrow 0, channel 0, size = 1024 Mb
[   16.741899] EDAC DEBUG: i3200_probe1: csrow 1, channel 0, size = 1024 Mb

and the corresponding sysfs nodes are now properly filled.

Signed-off-by: Mauro Carvalho Chehab

i3200_edac: Add more debug to the driver

2013-02-21T14:06:22+00:00

Currently, it is not possible to know, when debug is enabled,
if the driver is using 2 DIMMS per channel mode or not. It is
not possible to know the values of the drbs registers, used
to identify the memory rank sizes.

Add debug for both, as it helps to track issues on the driver.

Signed-off-by: Mauro Carvalho Chehab

Drivers: edac: remove __dev* attributes.

2013-01-03T23:57:03+00:00

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton 
Cc: Doug Thompson 
Cc: Borislav Petkov 
Cc: Mark Gross 
Cc: Jason Uhlenkott 
Cc: Mauro Carvalho Chehab 
Cc: Tim Small 
Cc: Ranganathan Desikan 
Cc: "Arvind R." 
Cc: Ralf Baechle 
Cc: David Daney 
Cc: Egor Martovetsky 
Cc: Olof Johansson 
Cc: Chris Metcalf 
Signed-off-by: Greg Kroah-Hartman