linux-toradex.git/drivers/edac, branch v3.2.68

i7300_edac: Fix device reference count

2014-04-01T23:58:55+00:00

commit 75135da0d68419ef8a925f4c1d5f63d8046e314d upstream.

pci_get_device() decrements the reference count of "from" (last
argument) so when we break off the loop successfully we have only one
device reference - and we don't know which device we have. If we want
a reference to each device, we must take them explicitly and let
the pci_get_device() walk complete to avoid duplicate references.

This is serious, as over-putting device references will cause
the device to eventually disappear. Without this fix, the kernel
crashes after a few insmod/rmmod cycles.

Tested on an Intel S7000FC4UR system with a 7300 chipset.

Signed-off-by: Jean Delvare 
Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare
Cc: Mauro Carvalho Chehab 
Cc: Doug Thompson 
Signed-off-by: Borislav Petkov 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

i7core_edac: Fix PCI device reference count

2014-04-01T23:58:55+00:00

commit c0f5eeed0f4cef4f05b74883a7160e7edde58b6a upstream.

The reference count changes done by pci_get_device can be a little
misleading when the usage diverges from the most common scheme. The
reference count of the device passed as the last parameter is always
decreased, even if the function returns no new device. So if we are
going to try alternative device IDs, we must manually increment the
device reference count before each retry. If we don't, we end up
decreasing the reference count, and after a few modprobe/rmmod cycles
the PCI devices will vanish.

In other words and as Alan put it: without this fix the EDAC code
corrupts the PCI device list.

This fixes kernel bug #50491:
https://bugzilla.kernel.org/show_bug.cgi?id=50491

Signed-off-by: Jean Delvare 
Link: http://lkml.kernel.org/r/20140224093927.7659dd9d@endymion.delvare
Reviewed-by: Alan Cox 
Cc: Mauro Carvalho Chehab 
Cc: Doug Thompson 
Signed-off-by: Borislav Petkov 
Signed-off-by: Ben Hutchings

EDAC: Correct workqueue setup path

2014-04-01T23:58:52+00:00

commit cb6ef42e516cb8948f15e4b70dc03af8020050a2 upstream.

We're using edac_mc_workq_setup() both on the init path, when
we load an edac driver and when we change the polling period
(edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec.

On that second path we don't need to init the workqueue which has been
initialized already.

Thanks to Tejun for workqueue insights.

Signed-off-by: Borislav Petkov 
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

EDAC: Test correct variable in ->store function

2013-02-06T04:33:50+00:00

commit 8024c4c0b1057d1cd811fc9c3f88f81de9729fcd upstream.

We're testing for ->show but calling ->store().

Signed-off-by: Dan Carpenter 
Signed-off-by: Borislav Petkov 
Signed-off-by: Ben Hutchings

i82975x_edac: Fix dimm label initialization

2013-01-03T03:33:54+00:00

commit 479696840239e0cc43efb3c917bdcad2174d2215 upstream.

The driver has only 4 hardcoded labels, but allows much more memory.
Fix it by removing the hardcoded logic, using snprintf() instead.

[   19.833972] general protection fault: 0000 [#1] SMP
[   19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core
[   19.837733] CPU 0
[   19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc.                 Precision WorkStation 390    /0MY510
[   19.837733] RIP: 0010:[]  [] strncpy+0x18/0x30
[   19.837733] RSP: 0018:ffff880078535b68  EFLAGS: 00010202
[   19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708
[   19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708
[   19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe
[   19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[   19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80
[   19.837733] FS:  00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[   19.837733] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0
[   19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450)
[   19.837733] Stack:
[   19.837733]  ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88
[   19.837733]  ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000
[   19.837733]  0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d
[   19.837733] Call Trace:
[   19.837733]  [] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac]
...

Fix bug reported at:
	https://bugzilla.redhat.com/show_bug.cgi?id=848149
And, very likely:
	https://bbs.archlinux.org/viewtopic.php?id=148033
	https://bugzilla.kernel.org/show_bug.cgi?id=47171

Cc: Alan Cox 
Signed-off-by: Mauro Carvalho Chehab 
[bwh: Backported to 3.2:
 - Adjust context
 - Use csrow->channels[chan].label not csrow->channels[chan]->dimm->label]
Signed-off-by: Ben Hutchings

i7300_edac: Fix error flag testing

2013-01-03T03:32:53+00:00

commit 7e06b7a3333f5c7a0cec12aff20d39c5c87c0795 upstream.

* Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so
  that the callers get the result they expect.
* Fix definition of FERR_FAT_FBD_ERR_MASK.
* Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on
  register FERR_NF_FBD. We were lucky they have the same definition.

This fixes kernel bug #44131:
https://bugzilla.kernel.org/show_bug.cgi?id=44131

Signed-off-by: Jean Delvare 
Cc: Mauro Carvalho Chehab 
Cc: Doug Thompson 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Ben Hutchings

amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]

2012-10-30T23:26:55+00:00

commit 168bfeef7bba3f9784f7540b053e4ac72b769ce9 upstream.

If none of the elements in scrubrates[] matches, this loop will cause
__amd64_set_scrub_rate() to incorrectly use the n+1th element.

As the function is designed to use the final scrubrates[] element in the
case of no match, we can fix this bug by simply terminating the array
search at the n-1th element.

Boris: this code is fragile anyway, see here why:
http://marc.info/?l=linux-kernel&m=135102834131236&w=2

It will be rewritten more robustly soonish.

Reported-by: Denis Kirjanov 
Cc: Doug Thompson 
Signed-off-by: Andrew Morton 
Signed-off-by: Borislav Petkov 
Signed-off-by: Ben Hutchings

sb_edac: Avoid overflow errors at memory size calculation

2012-10-10T02:31:05+00:00

commit deb09ddaff1435f72dd598d38f9b58354c68a5ec upstream.

Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.

The net result is that memories are improperly reported there, when
high-density DIMMs are used:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.

After the patch, the memory size (16 GB) is properly detected:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

Signed-off-by: Mauro Carvalho Chehab 
[bwh: Backported to 3.2:
 - Adjust context
 - Debug log function is debugf0(), not edac_dbg()]
Signed-off-by: Ben Hutchings

x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'

2012-08-04T15:31:12+00:00

commit 141168c36cdee3ff23d9c7700b0edc47cb65479f and
commit 3f806e50981825fa56a7f1938f24c0680816be45 upstream.

Several fields in struct cpuinfo_x86 were not defined for the
!SMP case, likely to save space.  However, those fields still
have some meaning for UP, and keeping them allows some #ifdef
removal from other files.  The additional size of the UP kernel
from this change is not significant enough to worry about
keeping up the distinction:

	   text    data     bss     dec     hex filename
	4737168	 506459	 972040	6215667	 5ed7f3	vmlinux.o.before
	4737444	 506459	 972040	6215943	 5ed907	vmlinux.o.after

for a difference of 276 bytes for an example UP config.

If someone wants those 276 bytes back badly then it should
be implemented in a cleaner way.

Signed-off-by: Kevin Winchester 
Cc: Steffen Persvold 
Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Borislav Petkov 
Signed-off-by: Ben Hutchings

edac: avoid mce decoding crash after edac driver unloaded

2012-07-04T04:44:06+00:00

commit e35fca4791fcdd43dc1fd769797df40c562ab491 upstream.

Some edac drivers register themselves as mce decoders via
notifier_chain. But in current notifier_chain implementation logic,
it doesn't accept same notifier registered twice. If so, it will be
wrong when adding/removing the element from the list. For example,
on one SandyBridge platform, remove module sb_edac and then trigger
one error, it will hit oops because it has no mce decoder registered
but related notifier_chain still points to an invalid callback
function. Here is an example:

Call Trace:
 [] atomic_notifier_call_chain+0x1a/0x20
 [] mce_log+0x46/0x180
 [] apei_mce_report_mem_error+0x4a/0x60
 [] ghes_do_proc+0x192/0x210
 [] ghes_proc+0x46/0x70
 [] ghes_notify_sci+0x48/0x80
 [] notifier_call_chain+0x55/0x80
 [] __blocking_notifier_call_chain+0x5a/0x80
 [] ? acpi_os_wait_events_complete+0x23/0x23
 [] blocking_notifier_call_chain+0x16/0x20
 [] acpi_hed_notify+0x19/0x1b
 [] acpi_device_notify+0x19/0x1b
 [] acpi_ev_notify_dispatch+0x67/0x7f
 [] acpi_os_execute_deferred+0x29/0x36
 [] process_one_work+0x132/0x450
 [] worker_thread+0x17b/0x3c0
 [] ? manage_workers+0x120/0x120
 [] kthread+0x9e/0xb0
 [] kernel_thread_helper+0x4/0x10
 [] ? kthread_freezable_should_stop+0x70/0x70
 [] ? gs_change+0x13/0x13
Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41
0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b
79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41
RIP  [] notifier_call_chain+0x46/0x80
 RSP 
CR2: ffffffffa01af838
---[ end trace 0100930068e73e6f ]---
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [] kthread_data+0x10/0x20
PGD 1a0d067 PUD 1a0e067 PMD 0
Oops: 0000 [#2] SMP

Only i7core_edac and sb_edac have such issues because they have more
than one memory controller which means they have to register mce
decoder many times.

Signed-off-by: Chen Gong 
Signed-off-by: Mauro Carvalho Chehab 
[bwh: Backported to 3.2: drivers call atomic_notifier_chain_{,un}register()
 directly]
Signed-off-by: Ben Hutchings