Pull EDAC updates from Borislav Petkov:

 - Add a FRU (Field Replaceable Unit) memory poison manager which
   collects and manages previously encountered hw errors in order to
   save them to persistent storage across reboots. Previously recorded
   errors are "replayed" upon reboot in order to poison memory which has
   caused said errors in the past.

   The main use case is stacked, on-chip memory which cannot simply be
   replaced so poisoning faulty areas of it and thus making them
   inaccessible is the only strategy to prolong its lifetime.

 - Add an AMD address translation library glue which converts the
   reported addresses of hw errors into system physical addresses in
   order to be used by other subsystems like memory failure, for
   example. Add support for MI300 accelerators to that library.

 - igen6: Add support for Alder Lake-N SoC

 - i10nm: Add Grand Ridge support

 - The usual fixlets and cleanups

* tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/versal: Convert to platform remove callback returning void
  RAS/AMD/FMPM: Fix off by one when unwinding on error
  RAS/AMD/FMPM: Add debugfs interface to print record entries
  RAS/AMD/FMPM: Save SPA values
  RAS: Export helper to get ras_debugfs_dir
  RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
  RAS: Introduce a FRU memory poison manager
  RAS/AMD/ATL: Add MI300 row retirement support
  Documentation: Move RAS section to admin-guide
  EDAC/versal: Make the bit position of injected errors configurable
  EDAC/i10nm: Add Intel Grand Ridge micro-server support
  EDAC/igen6: Add one more Intel Alder Lake-N SoC support
  RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
  RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
  RAS/AMD/ATL: Add MI300 support
  Documentation: RAS: Add index and address translation section
  EDAC/amd64: Use new AMD Address Translation Library
  RAS: Introduce AMD Address Translation Library
  EDAC/synopsys: Convert to devm_platform_ioremap_resource()

* ras/edac-drivers:
  EDAC/i10nm: Add Intel Grand Ridge micro-server support
  EDAC/igen6: Add one more Intel Alder Lake-N SoC support

* ras/edac-misc:
  EDAC/versal: Convert to platform remove callback returning void
  EDAC/versal: Make the bit position of injected errors configurable
  EDAC/synopsys: Convert to devm_platform_ioremap_resource()

* ras/edac-amd-atl:
  RAS/AMD/FMPM: Fix off by one when unwinding on error
  RAS/AMD/FMPM: Add debugfs interface to print record entries
  RAS/AMD/FMPM: Save SPA values
  RAS: Export helper to get ras_debugfs_dir
  RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
  RAS: Introduce a FRU memory poison manager
  RAS/AMD/ATL: Add MI300 row retirement support
  Documentation: Move RAS section to admin-guide
  RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
  RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
  RAS/AMD/ATL: Add MI300 support
  Documentation: RAS: Add index and address translation section
  EDAC/amd64: Use new AMD Address Translation Library
  RAS: Introduce AMD Address Translation Library

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve this, there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/83deca1ce260f7e17ff3cb106c9a6946d4ca4505.1709886922.git.u.kleine-koenig@pengutronix.de

AMD (ab)uses topology_die_id() to store the Node ID information and
topology_max_dies_per_pkg to store the number of nodes per package.

This collides with the proper processor die level enumeration which is
coming on AMD with CPUID 8000_0026, unless there is a correlation between
the two. There is zero documentation about that.

So provide new storage and new accessors which for now still access die_id
and topology_max_die_per_pkg(). Will be mopped up after AMD and HYGON are
converted over.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.956116738@linutronix.de

Currently, the bit positions to inject correctable and uncorrectable
errors are hardcoded. To make that configurable add separate sysfs entries
to set the bit positions for injecting CE and UE errors. Allow for
single bit error for CE and two bits errors for UE injection.

  [ bp: Massage. ]

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240208094653.11704-1-shubhrajyoti.datta@amd.com

The Grand Ridge CPU model uses similar memory controller registers with
Granite Rapids server. Add Grand Ridge CPU model ID for EDAC support.

Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240129062040.60809-3-qiuxu.zhuo@intel.com

Add a new Intel Alder Lake-N SoC compute die ID for EDAC support.

Signed-off-by: Lili Li <lili.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20240129062040.60809-2-qiuxu.zhuo@intel.com

Remove old address translation code and use the new AMD Address
Translation Library.

Use "imply" in Kconfig so that the "AMD_ATL" config option takes the
value of "EDAC_AMD64" as its default.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240123041401.79812-3-yazen.ghannam@amd.com

Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230704101811.49637-3-frank.li@vivo.com

Pull driver core updates from Greg KH:
 "Here are the set of driver core and kernfs changes for 6.8-rc1.
  Nothing major in here this release cycle, just lots of small cleanups
  and some tweaks on kernfs that in the very end, got reverted and will
  come back in a safer way next release cycle.

  Included in here are:

   - more driver core 'const' cleanups and fixes

   - fw_devlink=rpm is now the default behavior

   - kernfs tiny changes to remove some string functions

   - cpu handling in the driver core is updated to work better on many
     systems that add topologies and cpus after booting

   - other minor changes and cleanups

  All of the cpu handling patches have been acked by the respective
  maintainers and are coming in here in one series. Everything has been
  in linux-next for a while with no reported issues"

* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
  Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
  kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
  class: fix use-after-free in class_register()
  PM: clk: make pm_clk_add_notifier() take a const pointer
  EDAC: constantify the struct bus_type usage
  kernfs: fix reference to renamed function
  driver core: device.h: fix Excess kernel-doc description warning
  driver core: class: fix Excess kernel-doc description warning
  driver core: mark remaining local bus_type variables as const
  driver core: container: make container_subsys const
  driver core: bus: constantify subsys_register() calls
  driver core: bus: make bus_sort_breadthfirst() take a const pointer
  kernfs: d_obtain_alias(NULL) will do the right thing...
  driver core: Better advertise dev_err_probe()
  kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
  kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
  kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
  initramfs: Expose retained initrd as sysfs file
  fs/kernfs/dir: obey S_ISGID
  kernel/cgroup: use kernfs_create_dir_ns()
  ...