linux-toradex.git/drivers/extcon/Makefile, branch v4.14-rc5

extcon: cros-ec: Add extcon-cros-ec driver to support display out

2017-07-17T10:25:49+00:00

This is the driver for the USB Type C cable detection mechanism
built into the ChromeOS Embedded Controller on systems that
have USB Type-C ports.

At present, this allows for the presence of display out, but in
future, it may also be used to notify host and device type cables
and the presence of power.

Signed-off-by: Benson Leung 
Signed-off-by: Enric Balletbo i Serra 
Acked-by: Chanwoo Choi 
Acked-by: Lee Jones 
Signed-off-by: Chanwoo Choi

extcon: intel-cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver

2017-04-06T01:55:23+00:00

Add a driver for charger detection / control on the Intel Cherrytrail
Whiskey Cove PMIC.

Signed-off-by: Hans de Goede 
Signed-off-by: Chanwoo Choi

extcon: int3496: Add Intel INT3496 ACPI device extcon driver

2017-01-09T01:04:11+00:00

Add an extcon driver for USB OTG ports controlled by an Intel INT3496
ACPI device (e.g. Baytrail, Cherrytrail devices).

Signed-off-by: David Cohen 
[hdgoede@redhat.com: Port to current kernel, cleanup, submit upstream]
[hdgoede@redhat.com: Add Documentation/extcon/intel-int3496.txt]
Signed-off-by: Hans de Goede 
Signed-off-by: Chanwoo Choi

extcon: Add support for qcom SPMI PMIC USB id detection hardware

2016-09-13T02:26:26+00:00

Some Qualcomm PMICs have a misc device that performs USB id pin
detection via an interrupt. When the interrupt triggers, we
should read the interrupt line to see if it has gone high or low.
If the interrupt is low then the ID pin is grounded, and if the
interrupt is high then the ID pin is being held high.

Cc: Roger Quadros 
Signed-off-by: Stephen Boyd 
[cw00.choi: Edited the driver description and added the author information]
Signed-off-by: Chanwoo Choi

extcon: link devres into core module

2016-06-30T13:18:40+00:00

Splitting the resource-managed functions into a separate module
means that the extcon core now fails to build because the internal
"extcon_dev_allocate" symbol is not exported:

ERROR: extcon_dev_allocate [drivers/extcon/devres.ko] undefined!

My guess is that the intention was not to have two separate
modules (which could be fixed by adding an export, plus the
normal MODULE_AUTHOR/MODULE_LICENSE/... fields), but have two
source files in the same module.

This fixes the Makefile accordingly, making the name of the
module extcon_core.ko, which is created from building both
extcon.c and devres.c.

Fixes: b225d00f3ad2 ("extcon: Split out the resource-managed functions from extcon core")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Chanwoo Choi

extcon: Split out the resource-managed functions from extcon core

2016-06-27T11:31:23+00:00

This patch split out the resource-managed related functions
from extcon core driver.

Signed-off-by: Chanwoo Choi

extcon: add Maxim MAX3355 driver

2015-12-21T02:44:00+00:00

Maxim Integrated MAX3355E chip integrates a charge pump and comparators to
enable a system with an integrated USB OTG dual-role transceiver to
function as an USB OTG dual-role device. In addition to sensing/controlling
Vbus, the chip also passes thru the ID signal from the USB OTG connector.
On some Renesas boards, this signal is just fed into the SoC thru a GPIO
pin -- there's no real OTG controller, only host and gadget USB controllers
sharing the same USB bus; however, we'd like to allow host or gadget
drivers to be loaded depending on the cable type, hence the need for the
MAX3355 extcon driver. The Vbus status signals are also wired to GPIOs
(however, we aren't currently interested in them), the OFFVBUS# signal is
controlled by the host controllers, there's also the SHDN# signal wired to
a GPIO, it should be driven high for the normal operation.

Signed-off-by: Sergei Shtylyov 
Acked-by: Chanwoo Choi 
Acked-by: Rob Herring 
[cw00.choi: Add the GPIOLIB dependency]
Signed-off-by: Chanwoo Choi

extcon: axp288: Add axp288 extcon driver support

2015-05-19T07:39:04+00:00

This patch adds the extcon support for AXP288 PMIC which
has the BC1.2 charger detection capability. Additionally
it also adds the USB mux switching support b/w SOC and PMIC
based on GPIO control.

Signed-off-by: Ramakrishna Pallala 
Acked-by: Lee Jones 
[cw00.choi: Modify the log message to keep the consistent log message pattern]
Signed-off-by: Chanwoo Choi

extcon: Rename extcon core driver

2015-03-07T13:58:10+00:00

This patch renames the extcon core driver from extcon-class.c
to extcon.c because '-class' postfix is not necessary.

Signed-off-by: Chanwoo Choi

extcon: max77843: Add max77843 MUIC driver

2015-02-24T00:00:54+00:00

This patch adds MAX77843 extcon driver to support for MUIC(Micro
USB Interface Controller) device by using EXTCON subsystem to handle
various external connectors.

Signed-off-by: Jaewon Kim 
Signed-off-by: Chanwoo Choi