linux-toradex.git/drivers/extcon, branch v5.15-rc5

Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2021-07-05T20:42:16+00:00

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char / misc and other driver subsystem updates
  for 5.14-rc1. Included in here are:

   - habanalabs driver updates

   - fsl-mc driver updates

   - comedi driver updates

   - fpga driver updates

   - extcon driver updates

   - interconnect driver updates

   - mei driver updates

   - nvmem driver updates

   - phy driver updates

   - pnp driver updates

   - soundwire driver updates

   - lots of other tiny driver updates for char and misc drivers

  This is looking more and more like the "various driver subsystems
  mushed together" tree...

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
  mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
  PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
  bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
  bus: mhi: Wait for M2 state during system resume
  bus: mhi: core: Fix power down latency
  intel_th: Wait until port is in reset before programming it
  intel_th: msu: Make contiguous buffers uncached
  intel_th: Remove an unused exit point from intel_th_remove()
  stm class: Spelling fix
  nitro_enclaves: Set Bus Master for the NE PCI device
  misc: ibmasm: Modify matricies to matrices
  misc: vmw_vmci: return the correct errno code
  siox: Simplify error handling via dev_err_probe()
  fpga: machxo2-spi: Address warning about unused variable
  lkdtm/heap: Add init_on_alloc tests
  selftests/lkdtm: Enable various testable CONFIGs
  lkdtm: Add CONFIG hints in errors where possible
  lkdtm: Enable DOUBLE_FAULT on all architectures
  lkdtm/heap: Add vmalloc linear overflow test
  lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
  ...

extcon: sm5502: Add support for SM5504

2021-06-21T09:28:01+00:00

SM5504 is another MUIC from Silicon Mitus that is fairly similar
to SM5502. They seem to use the same register set, but:

  - SM5504 has some additional bits in SM5502_REG_CONTROL
  - SM5504 has a quite different set of interrupts
  - SM5504 reports USB OTG as dev_type1 = BIT(0) instead of BIT(7)

Overall it's minor and we can support this by defining a separate
struct sm5502_type for SM5504.

Signed-off-by: Stephan Gerhold 
Signed-off-by: Chanwoo Choi

extcon: sm5502: Refactor driver to use chip-specific struct

2021-06-21T09:28:01+00:00

Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing
enum sm5504_types with a struct sm5504_type that stores the chip-specific
definitions. This struct can then be defined separately for SM5504
without having to add if (type == TYPE_SM5504) everywhere in the code.

Signed-off-by: Stephan Gerhold 
Signed-off-by: Chanwoo Choi

extcon: sm5502: Implement i2c_driver->probe_new()

2021-06-21T09:28:01+00:00

sm5022_muic_i2c_probe() does not use the i2c_device_id,
so implement i2c_driver->probe_new() instead of probe().

Signed-off-by: Stephan Gerhold 
Signed-off-by: Chanwoo Choi

extcon: sm5502: Use devm_regmap_add_irq_chip()

2021-06-21T09:28:00+00:00

Use devm_regmap_add_irq_chip() to avoid having to remove the
irqchip explicitly in sm5502_muic_i2c_remove().

Signed-off-by: Stephan Gerhold 
Signed-off-by: Chanwoo Choi

extcon: max8997: Add missing modalias string

2021-06-21T09:28:00+00:00

The platform device driver name is "max8997-muic", so advertise it
properly in the modalias string. This fixes automated module loading when
this driver is compiled as a module.

Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver")
Signed-off-by: Marek Szyprowski 
Signed-off-by: Chanwoo Choi

extcon: sm5502: Drop invalid register write in sm5502_reg_data

2021-06-21T09:28:00+00:00

When sm5502_init_dev_type() iterates over sm5502_reg_data to
initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data).
There is no need to add another empty element to sm5502_reg_data.

Having the additional empty element in sm5502_reg_data will just
result in writing 0xff to register 0x00, which does not really
make sense.

Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver")
Signed-off-by: Stephan Gerhold 
Signed-off-by: Chanwoo Choi

extcon: intel-mrfld: Sync hardware and software state on init

2021-06-21T09:28:00+00:00

extcon driver for Basin Cove PMIC shadows the switch status used for dwc3
DRD to detect a change in the switch position. This change initializes the
status at probe time.

Cc: stable@vger.kernel.org
Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC")
Reviewed-by: Andy Shevchenko 
Signed-off-by: Ferry Toth 
Signed-off-by: Chanwoo Choi

extcon: extcon-max8997: Simplify driver using devm

2021-06-17T11:22:27+00:00

Simplify driver by switching to use the resource managed IRQ
requesting and resource managed work-queue initialization.

Signed-off-by: Matti Vaittinen 
Reviewed-by: Hans de Goede 
Acked-by: Chanwoo Choi 
Link: https://lore.kernel.org/r/61190cc280a63baeb05ec570282bb3677bee8e7b.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede

extcon: extcon-max8997: Fix IRQ freeing at error path

2021-06-17T11:22:11+00:00

If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits
without freeing the requested IRQs.

Free the IRQs prior returning if reading the status fails.

Fixes: 3e34c8198960 ("extcon: max8997: Avoid forcing UART path on drive probe")
Signed-off-by: Matti Vaittinen 
Reviewed-by: Hans de Goede 
Acked-by: Chanwoo Choi 
Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede