<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/firmware/efi, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>Merge tag 'liveupdate-v7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux</title>
<updated>2026-10-26T03:42:42+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-10-26T03:42:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=126ad898a6e97fcb4c3fbe6d979829f72b8c348c'/>
<id>126ad898a6e97fcb4c3fbe6d979829f72b8c348c</id>
<content type='text'>
Pull liveupdate updates from Mike Rapoport:

 - Several small fixes to KHO and LiveUpdate selftest

 - A series that renames "KHO scratch" to "KHO bootmem" because this
   memory is way more important in kexec'ed kernels rather than in the
   original cold boot kernel and the new name reflects it

* tag 'liveupdate-v7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
  kho: do not reserve empty per-node bootmem areas
  selftests/liveupdate: Prefer KVM and HVF over TCG in vmtest.sh
  kho: rename kho_scratch= commandline parameter to kho_bootmem=
  kho: rename KHO scratch to KHO bootmem
  memblock: rename KHO_SCRATCH to KHO_NOPRSRV
  memblock: get rid of CONFIG_MEMBLOCK_KHO_SCRATCH
  kho: docs: fix scratch_phys debugfs cross-reference
  kho: do not reserve scratch memory in the kdump kernel
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull liveupdate updates from Mike Rapoport:

 - Several small fixes to KHO and LiveUpdate selftest

 - A series that renames "KHO scratch" to "KHO bootmem" because this
   memory is way more important in kexec'ed kernels rather than in the
   original cold boot kernel and the new name reflects it

* tag 'liveupdate-v7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
  kho: do not reserve empty per-node bootmem areas
  selftests/liveupdate: Prefer KVM and HVF over TCG in vmtest.sh
  kho: rename kho_scratch= commandline parameter to kho_bootmem=
  kho: rename KHO scratch to KHO bootmem
  memblock: rename KHO_SCRATCH to KHO_NOPRSRV
  memblock: get rid of CONFIG_MEMBLOCK_KHO_SCRATCH
  kho: docs: fix scratch_phys debugfs cross-reference
  kho: do not reserve scratch memory in the kdump kernel
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'efi-next-for-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi</title>
<updated>2026-10-25T06:07:00+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-10-25T06:07:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=89d2d7bf0698b7fdfc914bfd219e739e9308d332'/>
<id>89d2d7bf0698b7fdfc914bfd219e739e9308d332</id>
<content type='text'>
Pull EFI updates from Ard Biesheuvel:

 - Set the LoaderDevicePartUUID EFI variable from the stub to help
   systemd discover the file system layout when booting straight into
   Linux without GRUB or systemd-boot (Vincent Mailhol)

 - Some GUID deduplication work from Vincent

 - Remove pointless UTF16-&gt;UTF8 and vice versa conversions from the stub

 - Some kmap() -&gt; kmap_local_page() conversions in the capsule loader

 - Add a runtime control to en/disable EFI runtime services so that
   PREEMPT_RT systems can enable them as needed

 - Add a 'nostatfs' mount option to efivarfs so that the cost of
   querying the EFI variable store (which is already rate limited) can
   be avoided entirely on systems where it is disproportionately costly

 - Rework the EFI libstub Makefile to align x86 with other
   architectures, and inherit/adapt the global CFLAGS variable rather
   than reconstruct it from scratch

 - Constify attributes of statically allocated sysfs nodes

 - Avoid register x18 when building the arm64 EFI stub, in order to
   comply with the UEFI spec, and to permit it to execute in a context
   where x18 is special

 - Preserve the physical addresses of all EFI config tables that may be
   of interest to an incoming kexec kernel

 - Add some LKDTM tests for EFI runtime crashes where the faulting
   address is inside a EFI memory region

 - Other minor bug fixes and cosmetic cleanups

* tag 'efi-next-for-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (35 commits)
  lkdtm: Add more EFI runtime tests
  efi: Initialize all configuration table addresses to EFI_INVALID_TABLE_ADDR
  efi: Retain the address of the LINUX_EFI_MEMRESERVE table
  efi/libstub: Don't replace an existing LINUX_EFI_MEMRESERVE table
  efi/runtime-wrappers: Don't park the worker after a recovered firmware fault
  efi: Use sysfs_emit() not sprintf() to generate sysfs file contents
  efi: Constify sysfs attributes
  efi/libstub: Disable kernel stack erasing in the common flags
  efi/libstub: Build the x86 stub from KBUILD_CFLAGS
  efi/libstub: Declare the x86 stub's assembly entry points
  efi/libstub: arm64: Don't use the platform register x18
  efi/libstub: Free cmdline_ptr in efi_pe_entry
  efi/riscv: libstub: Don't set image_size in handle_kernel_image()
  efi/libstub: Fix error unwind freeing fdt in allocate_new_fdt_and_exit_boot()
  efivarfs: add nostatfs mount option to skip QueryVariableInfo()
  efi/libstub: add initial Boot Loader Interface support
  efi/libstub: Add efi_snprintf() to construct wide strings
  efi/libstub: Add support for printing human readable GUIDs
  efi/libstub: Output UTF-16 directly from vsnprintf()
  efi/libstub: Avoid efi_puts() for compile time constant strings
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull EFI updates from Ard Biesheuvel:

 - Set the LoaderDevicePartUUID EFI variable from the stub to help
   systemd discover the file system layout when booting straight into
   Linux without GRUB or systemd-boot (Vincent Mailhol)

 - Some GUID deduplication work from Vincent

 - Remove pointless UTF16-&gt;UTF8 and vice versa conversions from the stub

 - Some kmap() -&gt; kmap_local_page() conversions in the capsule loader

 - Add a runtime control to en/disable EFI runtime services so that
   PREEMPT_RT systems can enable them as needed

 - Add a 'nostatfs' mount option to efivarfs so that the cost of
   querying the EFI variable store (which is already rate limited) can
   be avoided entirely on systems where it is disproportionately costly

 - Rework the EFI libstub Makefile to align x86 with other
   architectures, and inherit/adapt the global CFLAGS variable rather
   than reconstruct it from scratch

 - Constify attributes of statically allocated sysfs nodes

 - Avoid register x18 when building the arm64 EFI stub, in order to
   comply with the UEFI spec, and to permit it to execute in a context
   where x18 is special

 - Preserve the physical addresses of all EFI config tables that may be
   of interest to an incoming kexec kernel

 - Add some LKDTM tests for EFI runtime crashes where the faulting
   address is inside a EFI memory region

 - Other minor bug fixes and cosmetic cleanups

* tag 'efi-next-for-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (35 commits)
  lkdtm: Add more EFI runtime tests
  efi: Initialize all configuration table addresses to EFI_INVALID_TABLE_ADDR
  efi: Retain the address of the LINUX_EFI_MEMRESERVE table
  efi/libstub: Don't replace an existing LINUX_EFI_MEMRESERVE table
  efi/runtime-wrappers: Don't park the worker after a recovered firmware fault
  efi: Use sysfs_emit() not sprintf() to generate sysfs file contents
  efi: Constify sysfs attributes
  efi/libstub: Disable kernel stack erasing in the common flags
  efi/libstub: Build the x86 stub from KBUILD_CFLAGS
  efi/libstub: Declare the x86 stub's assembly entry points
  efi/libstub: arm64: Don't use the platform register x18
  efi/libstub: Free cmdline_ptr in efi_pe_entry
  efi/riscv: libstub: Don't set image_size in handle_kernel_image()
  efi/libstub: Fix error unwind freeing fdt in allocate_new_fdt_and_exit_boot()
  efivarfs: add nostatfs mount option to skip QueryVariableInfo()
  efi/libstub: add initial Boot Loader Interface support
  efi/libstub: Add efi_snprintf() to construct wide strings
  efi/libstub: Add support for printing human readable GUIDs
  efi/libstub: Output UTF-16 directly from vsnprintf()
  efi/libstub: Avoid efi_puts() for compile time constant strings
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'drm-next-2026-10-21' of https://gitlab.freedesktop.org/drm/kernel</title>
<updated>2026-10-24T04:29:02+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-10-24T04:29:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5b0764a53235d3c77e1ed674e836e1b3fe1a4b1f'/>
<id>5b0764a53235d3c77e1ed674e836e1b3fe1a4b1f</id>
<content type='text'>
Pull drm updates from Dave Airlie:
 "Highlights:

   - core: a lot of atomic refactoring in progress, panic got split into
     a core/helpers model

   - amdgpu: enables HDMI 2.1 FRL and other good things finally, UAlink
     over Ethernet support

   - xe: has a bunch of CRI support, ras error for bad vram, memory
     offlining support.

   - msm: enables a bunch more GPUs.

  Otherwise it's a the usual mountain of stuff all over the place.
  Details:

  rust:
   - I/O tree shared with driver-core
   - DMA tree shared with driver-core
   - allow aux registration data closures to return covariant sub-fields
   - Implement Send and Sync for MapleTree
   - add pci resource flags and IORESOURCE_MEM_64

  drm/rust:
   - add dma_fence abstraction
   - init DRM registrations and their data in place
   - drop unused flags argument to registration

  vgaarb:
   - rework API to pass a private ptr instead of pci device

  sound:
   - adapt to omapdrm changes

  gem:
   - add callback for handle count going to 0

  gpusvm:
   - share one HMM fault and keep single mappings inline

  pagemap:
   - Prevent CPU stalls during unbounded pagemap teardown

  dma-fence:
   - fix docs

  vga_switcheroo:
   - disconnect from fbcon
   - update fbcon from within fbdev emulation

  atomic:
   - move DRM from state reset callbacks to atomic_create_state
   - remove drm_simple_encoder_init

  panic:
   - split into core and helpers

  buddy:
   - improve dirty tracking

  clients:
   - improve vmap handling
   - fbdev: Move helpers from drm_kms_helper.ko to drm_client_lib.ko

  display:
   - export HDMI SCDC status data via debugfs
   - rework SCDC for better HDMI 2.0 support
   - dp/mst: improve DPCD compliance

  edid:
   - parse AMD VSDB
   - parse ALLM/VRR capabilities
   - support detecting panel size

  log:
   - add drm_warn_ratelimited

  sched:
   - cleanup interface
   - add missing locking
   - fix run-queue cleanup
   - fix locking

  sysfb:
   - remove obsolete quirk for Lenovo D330
   - fix panel orientation for non-native display modes
   - drop drm_class_device_register

  colorop:
   - provide DRM_COLOR_OP_FIXED_MATRIX

  bridge:
   - analogix: Support eDP lane mapping
   - ti-sn65dsi83: Support LVDS Channel B on SN65DSI84
   - Select DRM_PANEL_BRIDGE for various drivers that require it
   - add chrontel ch7218a support

  panel:
   - panel-edp: Support MNE007QS3-F, TM140VDXP15, and KD116N36-30NB-A001
   - samsung-s6d16d0: Use mipi_dsi_*_multi() functions
   - support Ilitek ILI7836A OLED plus DT bindings
   - support Novatek NT36532 plus DT bindings
   - convert several drivers to managed cleanup
   - fix Kconfig selections
   - edp:
      - Add support for BOE NV140FHM-T0A
      - Support CSOT MNE007QB1-1
      - NV140WU2-M70
   - ebbg-ft8719: Fix MODULE_LICENSE() string; Improve initialization
   - samsung: Share test-key helpers
   - ilitek-ili9882t: Support Ilitek IL79600A plus DT bindings
   - simple: Support Truly TFT320240-229-E plus DT bindings; Support BOE
     DV215FHM-R01 plus DT bindings
   - Refactor struct drm_panel to contain struct drm_bridge plus fallout
     in various panel drivers
   - Add support for BOE Novatek NT51021, Retroid Pocket 6, Raydium
     RM69220 DDIC panels, Sharp LQ138P1JX61 eDP, BOE NV140FHD-N43, AUO
     B140HAN04.0, AUO 0x0db3, panels.

  amdgpu:
   - use AMD VSDB for freesync
   - implement YUV-to-RGB with fixed-matrix colorop
   - enable FRL for HDMI
   - HDMI 2.1 freesync support
   - HDMI 2.1 ALLM support
   - HDMI 2.1 VRR support
   - UALoE (UALink over Ethernet) support
   - add syncobj_points to userq signal ioctl
   - drop unused kunit tests
   - NBIO/GC/MMHUB/SMU updates/fixes
   - GPU spatial partitioning updates
   - display kunit fixes
   - userq fixes
   - RGB quantization fixes
   - DC RMCM refactor
   - DP MST fixes
   - USB4 fixes
   - add new trace events
   - Rework display instance handling
   - stack frame size fixes for various compilers/configs
   - VCN 4/5 reset fixes
   - freesync updates
   - cursor refactor
   - Fix direct scanout alpha on some DRM_FORMATs
   - Expand Mac reserved memory workaround
   - Make runtime pm more fine grained

  amdkfd:
   - updates and fixes
   - GC 10 CU occupancy support

  radeon:
   - eDP fix for DCE3.2 iMacs

  xe:
   - add drm_ras netlink error event support
   - add memory page offlining support
   - introduce error threshold to drm_ras
   - fix stale GTT mappings on unmap
   - reject page faults for non-page fault mode scratch VM
   - enable CRI package and VRAM temperatures
   - introduce cold reset recovery
   - handle CRI+ power interval encoding
   - VF migration for multi-queue
   - handle exec queue teardown after hot unplug
   - alerts and controller enabling modifications
   - use IBCv3 on PTL
   - VRAM health check
   - report GT TDR and VM rebind faults using SIGID
   - add multi_queue_active_lrca debugfs
   - shrinker: Runtime PM reference for non-system memory
   - guc: Add simple KLV decoder helpers
   - debugfs: Expose per-engine idle status
   - Keep walking on SVM eviction failure
   - Nuke PTs only after unlinking contested VMAs
   - limit sg segment size to PAGE_SIZE on Xen PV
   - keep VF LMEM bar size low if no VFs
   - CPU binds and ULLS on migration queue
   - New PTL PCI ID
   - Enable PXP for NVL-S
   - Do not dma_fence_put zero fences in err_out path
   - Refresh TTM LRU on SVM prefetch
   - export device UID in sysfs

  i915:
   - rename GEN6_PCODE_DATA to match spec
   - fix incorrect RCU teardown order
   - fix potential UAF in command parsing
   - avoid WARN splat during RPS boosting race
   - use simpler min functions
   - Fixes to make i915 work well with PREEMPT_RT

  i915/display:
   - Enable CMRR (Content Match Refresh Rate) in fixed-RR VRR path
   - Switch DG2 MPLL to DPLL framework
   - DP-HDMI PCON DSC fixes
   - limit invalid joiner combinations
   - CDCLK related fixes and refactor around PCODE integration
   - Gate UHBR SST SDP splitting on sink caps
   - add HDMI TMDS audio bandwidth check
   - vswing/preemph override
   - enable AS SDP Skip frames
   - Handle negative configuration index on DP link caps for robustness
   - Preparation for enabling SDR plane color pipeline
   - An eDP quirk for HP Pavilion Plus
   - Introduce PME (Power Management Event) support on display hotplug
   - Handle VSC SDP revision 7 in unpack

  msm:
   - CI:
      - Dropped sc7180 trogdor lazor from the CI
   - Core:
      - Fixed msm_ioremap for resources without a name
      - Changed msm.separate_gpu_kms to default to auto selection
   - GPU:
      - Enable CLX (Current Limit eXtension) for gen8 to avoid exceeding
        limits on CX/GX rails
      - New GPUs: a830 (Pakala), a845 (Maili), a850 (Hawi), x2-85
        (Mahua)
      - Fix VBIF halt mask on a306, which was preventing runpm suspend
      - Enable THP support for GEM buffers
      - Add modparam to disable waiting on fences in shrinker
      - Drop use of drm_prime_sg_to_page_array()
      - a5xx: don't read the GPMU registers on GPUs without a GPMU
      - a2xx/a3xx/a5xx: hangcheck progress detection
      - a6xx: gmuwrapper runpm fix
      - Calculate reported GMEM size based on active slices
      - Split a6xx/a7xx/a8xx catalog
   - DP:
      - Picked up some preparation patches for the MST support
      - Fixed reported status of the link training
   - DPU:
      - Fixed CRTC bandwidth computation
      - Fixed DSC programming
      - Fixed encoder disablement path
   - DSI:
      - Fixed VM leak in error path
      - Indention fix
   - MDP5:
      - Added MSM8952 configuration
      - Dropped incorrect cursor pipe on MSM8976/56
   - HDMI:
      - Small fixes

  nouveau:
   - improve runtime PM on R570 GSP firmware
   - various fixes throughout the driver
   - dispnv50: support 2.147 GHz pixel clock in GB20x

  nova:
   - add initial uapi concept
   - add initial PRAMIN access support
   - add GpuMm centralized memory manager
   - add GPU VM and BAR1 support
   - add GPU interrupts and GSP events support
   - GSP messaging fixes

  tyr:
   - use bitfield!
   - zero unsupported and newly added GPU info fields
   - limit doorbell array to 17 entries

  exynos:
   - FIMD fixes
      - Fix clock leak on resume error path
      - Fix Sparse warnings by adding missing __iomem annotation
   - VIDI cleanup
      - Replace kmalloc() and copy_from_user() with memdup_user()

  amdxdna:
   - fix BO handling
   - Support AIE2 rev 9
   - Fix UAF access in scheduler fences
   - Update workqueue interface
   - expose busy time via fdinfo

  ast:
   - support 256-byte EDID

  hyperv_drm:
   - remove support for pre win10 hosts

  komeda:
   - fix GLB_CORE_ID usage

  omap:
   - report HDMI hotplug events to ASoC HDMI codec

  panthor:
   - provide gpu_cache_flush tracepoint
   - improve dma_fence signalling latency
   - improve locking
   - export scheduling information via debugfs
   - Validate user-space input against firmware limits

  qaic:
   - reject BOs that exceed maximum page count
   - add missing include statements

  verisilicon:
   - fix hardware cursor offsets

  vkms:
   - implement YUV-to-RGB with fixed-matrix colorop

  gma500:
   - avoid unsupported ARGB formats in primary plane

  hibmc:
   - handle vblank interrupts correctly

  ivpu:
   - add DRM_IVPU_CAP_CMDQ_SET_PRIORITY
   - support command-queue priority ioctl
   - Simplify NULL-pointer handling in cleanup code

  arcpgu:
   - replace simple-display pipeline with regular atomic helpers

  aspeed:
   - replace simple-display pipeline with regular atomic helpers

  gm12u320:
   - replace simple-display pipeline with regular atomic helpers

  imagination:
   - various improvement to firmware interaction
   - add job to pvr_job_submit_fw trace event

  mali-dp:
   - fix runtime PM leak

  mcde:
   - replace simple-display pipeline with regular atomic helpers

  p111:
   - replace simple-display pipeline with regular atomic helpers
   - drop unsupported alpha formats from primary plane

  rcar-du:
   - support Renesas R-Car V4H DSC
   - dsi: Support larger transfers with AXI memory
   - Support RZ/G3L SoC

  repaper:
   - replace simple-display pipeline with regular atomic helpers

  rockchip:
   - dsi: improve PHY timings

  ssd130x:
   - support Solomon SSD1351 OLED plus DT bindings
   - ssd133x: upgrade color format to RGB565
   - ssd132x: Set correct hardware window when clearing screen

  tve200:
   - replace simple-display pipeline with regular atomic helpers

  xen:
   - replace simple-display pipeline with regular atomic helpers

  v3d:
   - improve job handling under perfmon

  vc4:
   - reliably reset V3D
   - drop brcm,vc4-v3d compatible

  virtio:
   - fix damage handling
   - Support ARGB8888 for virtio primary planes.

  host1x:
   - Support partitioning

  imx:
   - Replace simple-display with regular atomic helpers

  mxsfb:
   - Support bus formats plus DT bindings

  tegra:
   - improve syncobj handling on submit

  panfrost:
   - add Mali-G68 support
   - improve GPU reset handling

  rockchip:
   - add HDMI 2.0 support to dw-hdmi-qp
   - improve HPD handling"

* tag 'drm-next-2026-10-21' of https://gitlab.freedesktop.org/drm/kernel: (2324 commits)
  drm/adp: Switch to drm_atomic_helper_connector_create_state
  drm/malidp: Convert to atomic_create_state
  drm/vc4: Switch to drm_atomic_helper_connector_create_state
  drm/sysfb: Switch to drm_atomic_helper_connector_create_state
  drm/solomon: ssd130x: Switch to drm_atomic_helper_connector_create_state
  drm/imx: ipuv3: Switch to drm_atomic_helper_connector_create_state
  drm/hyperv: Switch to drm_atomic_helper_connector_create_state
  drm/bridge: megachips: Switch to drm_atomic_helper_connector_create_state
  drm/bridge: lontium-lt8912b: Switch to drm_atomic_helper_connector_create_state
  drm/arm: komeda: Switch to drm_atomic_helper_connector_create_state
  drm/appletbdrm: Fix incorrect error message on encoder attach failure
  drm/sun4i: hdmi: Convert to drmm_connector_hdmi_init()
  drm/rockchip: rk3066_hdmi: Advertise HDMI 1.4 capabilities
  drm/bridge: lontium-lt9611: Advertise HDMI 1.4 capabilities
  drm/bridge: ite-it66121: Advertise HDMI 1.2 capabilities
  drm/bridge: ite-it6263: Advertise HDMI 1.3 capabilities
  drm/bridge: ite-it6263: Drop redundant .mode_valid hook
  drm/bridge: inno-hdmi: Advertise HDMI 1.2 capabilities
  drm/bridge: adv7511: Advertise HDMI 1.2 capabilities
  drm/sched: Document entity-&gt;stopped is protected by entity-&gt;lock
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull drm updates from Dave Airlie:
 "Highlights:

   - core: a lot of atomic refactoring in progress, panic got split into
     a core/helpers model

   - amdgpu: enables HDMI 2.1 FRL and other good things finally, UAlink
     over Ethernet support

   - xe: has a bunch of CRI support, ras error for bad vram, memory
     offlining support.

   - msm: enables a bunch more GPUs.

  Otherwise it's a the usual mountain of stuff all over the place.
  Details:

  rust:
   - I/O tree shared with driver-core
   - DMA tree shared with driver-core
   - allow aux registration data closures to return covariant sub-fields
   - Implement Send and Sync for MapleTree
   - add pci resource flags and IORESOURCE_MEM_64

  drm/rust:
   - add dma_fence abstraction
   - init DRM registrations and their data in place
   - drop unused flags argument to registration

  vgaarb:
   - rework API to pass a private ptr instead of pci device

  sound:
   - adapt to omapdrm changes

  gem:
   - add callback for handle count going to 0

  gpusvm:
   - share one HMM fault and keep single mappings inline

  pagemap:
   - Prevent CPU stalls during unbounded pagemap teardown

  dma-fence:
   - fix docs

  vga_switcheroo:
   - disconnect from fbcon
   - update fbcon from within fbdev emulation

  atomic:
   - move DRM from state reset callbacks to atomic_create_state
   - remove drm_simple_encoder_init

  panic:
   - split into core and helpers

  buddy:
   - improve dirty tracking

  clients:
   - improve vmap handling
   - fbdev: Move helpers from drm_kms_helper.ko to drm_client_lib.ko

  display:
   - export HDMI SCDC status data via debugfs
   - rework SCDC for better HDMI 2.0 support
   - dp/mst: improve DPCD compliance

  edid:
   - parse AMD VSDB
   - parse ALLM/VRR capabilities
   - support detecting panel size

  log:
   - add drm_warn_ratelimited

  sched:
   - cleanup interface
   - add missing locking
   - fix run-queue cleanup
   - fix locking

  sysfb:
   - remove obsolete quirk for Lenovo D330
   - fix panel orientation for non-native display modes
   - drop drm_class_device_register

  colorop:
   - provide DRM_COLOR_OP_FIXED_MATRIX

  bridge:
   - analogix: Support eDP lane mapping
   - ti-sn65dsi83: Support LVDS Channel B on SN65DSI84
   - Select DRM_PANEL_BRIDGE for various drivers that require it
   - add chrontel ch7218a support

  panel:
   - panel-edp: Support MNE007QS3-F, TM140VDXP15, and KD116N36-30NB-A001
   - samsung-s6d16d0: Use mipi_dsi_*_multi() functions
   - support Ilitek ILI7836A OLED plus DT bindings
   - support Novatek NT36532 plus DT bindings
   - convert several drivers to managed cleanup
   - fix Kconfig selections
   - edp:
      - Add support for BOE NV140FHM-T0A
      - Support CSOT MNE007QB1-1
      - NV140WU2-M70
   - ebbg-ft8719: Fix MODULE_LICENSE() string; Improve initialization
   - samsung: Share test-key helpers
   - ilitek-ili9882t: Support Ilitek IL79600A plus DT bindings
   - simple: Support Truly TFT320240-229-E plus DT bindings; Support BOE
     DV215FHM-R01 plus DT bindings
   - Refactor struct drm_panel to contain struct drm_bridge plus fallout
     in various panel drivers
   - Add support for BOE Novatek NT51021, Retroid Pocket 6, Raydium
     RM69220 DDIC panels, Sharp LQ138P1JX61 eDP, BOE NV140FHD-N43, AUO
     B140HAN04.0, AUO 0x0db3, panels.

  amdgpu:
   - use AMD VSDB for freesync
   - implement YUV-to-RGB with fixed-matrix colorop
   - enable FRL for HDMI
   - HDMI 2.1 freesync support
   - HDMI 2.1 ALLM support
   - HDMI 2.1 VRR support
   - UALoE (UALink over Ethernet) support
   - add syncobj_points to userq signal ioctl
   - drop unused kunit tests
   - NBIO/GC/MMHUB/SMU updates/fixes
   - GPU spatial partitioning updates
   - display kunit fixes
   - userq fixes
   - RGB quantization fixes
   - DC RMCM refactor
   - DP MST fixes
   - USB4 fixes
   - add new trace events
   - Rework display instance handling
   - stack frame size fixes for various compilers/configs
   - VCN 4/5 reset fixes
   - freesync updates
   - cursor refactor
   - Fix direct scanout alpha on some DRM_FORMATs
   - Expand Mac reserved memory workaround
   - Make runtime pm more fine grained

  amdkfd:
   - updates and fixes
   - GC 10 CU occupancy support

  radeon:
   - eDP fix for DCE3.2 iMacs

  xe:
   - add drm_ras netlink error event support
   - add memory page offlining support
   - introduce error threshold to drm_ras
   - fix stale GTT mappings on unmap
   - reject page faults for non-page fault mode scratch VM
   - enable CRI package and VRAM temperatures
   - introduce cold reset recovery
   - handle CRI+ power interval encoding
   - VF migration for multi-queue
   - handle exec queue teardown after hot unplug
   - alerts and controller enabling modifications
   - use IBCv3 on PTL
   - VRAM health check
   - report GT TDR and VM rebind faults using SIGID
   - add multi_queue_active_lrca debugfs
   - shrinker: Runtime PM reference for non-system memory
   - guc: Add simple KLV decoder helpers
   - debugfs: Expose per-engine idle status
   - Keep walking on SVM eviction failure
   - Nuke PTs only after unlinking contested VMAs
   - limit sg segment size to PAGE_SIZE on Xen PV
   - keep VF LMEM bar size low if no VFs
   - CPU binds and ULLS on migration queue
   - New PTL PCI ID
   - Enable PXP for NVL-S
   - Do not dma_fence_put zero fences in err_out path
   - Refresh TTM LRU on SVM prefetch
   - export device UID in sysfs

  i915:
   - rename GEN6_PCODE_DATA to match spec
   - fix incorrect RCU teardown order
   - fix potential UAF in command parsing
   - avoid WARN splat during RPS boosting race
   - use simpler min functions
   - Fixes to make i915 work well with PREEMPT_RT

  i915/display:
   - Enable CMRR (Content Match Refresh Rate) in fixed-RR VRR path
   - Switch DG2 MPLL to DPLL framework
   - DP-HDMI PCON DSC fixes
   - limit invalid joiner combinations
   - CDCLK related fixes and refactor around PCODE integration
   - Gate UHBR SST SDP splitting on sink caps
   - add HDMI TMDS audio bandwidth check
   - vswing/preemph override
   - enable AS SDP Skip frames
   - Handle negative configuration index on DP link caps for robustness
   - Preparation for enabling SDR plane color pipeline
   - An eDP quirk for HP Pavilion Plus
   - Introduce PME (Power Management Event) support on display hotplug
   - Handle VSC SDP revision 7 in unpack

  msm:
   - CI:
      - Dropped sc7180 trogdor lazor from the CI
   - Core:
      - Fixed msm_ioremap for resources without a name
      - Changed msm.separate_gpu_kms to default to auto selection
   - GPU:
      - Enable CLX (Current Limit eXtension) for gen8 to avoid exceeding
        limits on CX/GX rails
      - New GPUs: a830 (Pakala), a845 (Maili), a850 (Hawi), x2-85
        (Mahua)
      - Fix VBIF halt mask on a306, which was preventing runpm suspend
      - Enable THP support for GEM buffers
      - Add modparam to disable waiting on fences in shrinker
      - Drop use of drm_prime_sg_to_page_array()
      - a5xx: don't read the GPMU registers on GPUs without a GPMU
      - a2xx/a3xx/a5xx: hangcheck progress detection
      - a6xx: gmuwrapper runpm fix
      - Calculate reported GMEM size based on active slices
      - Split a6xx/a7xx/a8xx catalog
   - DP:
      - Picked up some preparation patches for the MST support
      - Fixed reported status of the link training
   - DPU:
      - Fixed CRTC bandwidth computation
      - Fixed DSC programming
      - Fixed encoder disablement path
   - DSI:
      - Fixed VM leak in error path
      - Indention fix
   - MDP5:
      - Added MSM8952 configuration
      - Dropped incorrect cursor pipe on MSM8976/56
   - HDMI:
      - Small fixes

  nouveau:
   - improve runtime PM on R570 GSP firmware
   - various fixes throughout the driver
   - dispnv50: support 2.147 GHz pixel clock in GB20x

  nova:
   - add initial uapi concept
   - add initial PRAMIN access support
   - add GpuMm centralized memory manager
   - add GPU VM and BAR1 support
   - add GPU interrupts and GSP events support
   - GSP messaging fixes

  tyr:
   - use bitfield!
   - zero unsupported and newly added GPU info fields
   - limit doorbell array to 17 entries

  exynos:
   - FIMD fixes
      - Fix clock leak on resume error path
      - Fix Sparse warnings by adding missing __iomem annotation
   - VIDI cleanup
      - Replace kmalloc() and copy_from_user() with memdup_user()

  amdxdna:
   - fix BO handling
   - Support AIE2 rev 9
   - Fix UAF access in scheduler fences
   - Update workqueue interface
   - expose busy time via fdinfo

  ast:
   - support 256-byte EDID

  hyperv_drm:
   - remove support for pre win10 hosts

  komeda:
   - fix GLB_CORE_ID usage

  omap:
   - report HDMI hotplug events to ASoC HDMI codec

  panthor:
   - provide gpu_cache_flush tracepoint
   - improve dma_fence signalling latency
   - improve locking
   - export scheduling information via debugfs
   - Validate user-space input against firmware limits

  qaic:
   - reject BOs that exceed maximum page count
   - add missing include statements

  verisilicon:
   - fix hardware cursor offsets

  vkms:
   - implement YUV-to-RGB with fixed-matrix colorop

  gma500:
   - avoid unsupported ARGB formats in primary plane

  hibmc:
   - handle vblank interrupts correctly

  ivpu:
   - add DRM_IVPU_CAP_CMDQ_SET_PRIORITY
   - support command-queue priority ioctl
   - Simplify NULL-pointer handling in cleanup code

  arcpgu:
   - replace simple-display pipeline with regular atomic helpers

  aspeed:
   - replace simple-display pipeline with regular atomic helpers

  gm12u320:
   - replace simple-display pipeline with regular atomic helpers

  imagination:
   - various improvement to firmware interaction
   - add job to pvr_job_submit_fw trace event

  mali-dp:
   - fix runtime PM leak

  mcde:
   - replace simple-display pipeline with regular atomic helpers

  p111:
   - replace simple-display pipeline with regular atomic helpers
   - drop unsupported alpha formats from primary plane

  rcar-du:
   - support Renesas R-Car V4H DSC
   - dsi: Support larger transfers with AXI memory
   - Support RZ/G3L SoC

  repaper:
   - replace simple-display pipeline with regular atomic helpers

  rockchip:
   - dsi: improve PHY timings

  ssd130x:
   - support Solomon SSD1351 OLED plus DT bindings
   - ssd133x: upgrade color format to RGB565
   - ssd132x: Set correct hardware window when clearing screen

  tve200:
   - replace simple-display pipeline with regular atomic helpers

  xen:
   - replace simple-display pipeline with regular atomic helpers

  v3d:
   - improve job handling under perfmon

  vc4:
   - reliably reset V3D
   - drop brcm,vc4-v3d compatible

  virtio:
   - fix damage handling
   - Support ARGB8888 for virtio primary planes.

  host1x:
   - Support partitioning

  imx:
   - Replace simple-display with regular atomic helpers

  mxsfb:
   - Support bus formats plus DT bindings

  tegra:
   - improve syncobj handling on submit

  panfrost:
   - add Mali-G68 support
   - improve GPU reset handling

  rockchip:
   - add HDMI 2.0 support to dw-hdmi-qp
   - improve HPD handling"

* tag 'drm-next-2026-10-21' of https://gitlab.freedesktop.org/drm/kernel: (2324 commits)
  drm/adp: Switch to drm_atomic_helper_connector_create_state
  drm/malidp: Convert to atomic_create_state
  drm/vc4: Switch to drm_atomic_helper_connector_create_state
  drm/sysfb: Switch to drm_atomic_helper_connector_create_state
  drm/solomon: ssd130x: Switch to drm_atomic_helper_connector_create_state
  drm/imx: ipuv3: Switch to drm_atomic_helper_connector_create_state
  drm/hyperv: Switch to drm_atomic_helper_connector_create_state
  drm/bridge: megachips: Switch to drm_atomic_helper_connector_create_state
  drm/bridge: lontium-lt8912b: Switch to drm_atomic_helper_connector_create_state
  drm/arm: komeda: Switch to drm_atomic_helper_connector_create_state
  drm/appletbdrm: Fix incorrect error message on encoder attach failure
  drm/sun4i: hdmi: Convert to drmm_connector_hdmi_init()
  drm/rockchip: rk3066_hdmi: Advertise HDMI 1.4 capabilities
  drm/bridge: lontium-lt9611: Advertise HDMI 1.4 capabilities
  drm/bridge: ite-it66121: Advertise HDMI 1.2 capabilities
  drm/bridge: ite-it6263: Advertise HDMI 1.3 capabilities
  drm/bridge: ite-it6263: Drop redundant .mode_valid hook
  drm/bridge: inno-hdmi: Advertise HDMI 1.2 capabilities
  drm/bridge: adv7511: Advertise HDMI 1.2 capabilities
  drm/sched: Document entity-&gt;stopped is protected by entity-&gt;lock
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'acpi-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm</title>
<updated>2026-10-21T22:08:18+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-10-21T22:08:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4df4d2a577db2d3d57b888bcfb1206fc74661d16'/>
<id>4df4d2a577db2d3d57b888bcfb1206fc74661d16</id>
<content type='text'>
Pull ACPI support updates from Rafael Wysocki:
 "The most significant change here is the rework of the core ACPI device
  enumeration code to avoid initializing ACPI power management
  prematurely for devices with unmet dependencies. This essentially is a
  problem fix, but it requires taking PCI device enumeration ordering
  into account among other things, so it is far from straightforward.
  There was an attempt to do this in the 7.3 time frame that had to be
  reverted, so this time it is done much more carefully.

  There is also an ACPI thermal control update rearranging the code to
  register thermal class cooling devices under specific parents, which
  is visible in sysfs. This helps to figure out what is represented by
  those devices much more easily, but it also allows the binding of
  cooling devices to trip points in thermal zones to be adjusted so it
  need not rely on specific cooling device data usage in thermal
  drivers.

  From the number of commits perspective, the most visible part is the
  one replacing acpi_get_first_physical_node() with
  acpi_bus_get_primary_device() everywhere and dropping the former that
  was inherently racy and generally unsafe to use. Fortunately, the
  maintainers involved responded timely and all of that could be done
  within one development cycle.

  Another quite visible part is Dave Jiang's series fixing multiple
  issues reported by Sashiko in the ACPI APEI support code with a PCI
  AER improvement on top. It took several iterations of this to make
  Sashiko happy and the code in question should be much more robust
  going forward.

  One other thing worth mentioning separately is that the ACPI bus type
  is now going to be registered as a "companion" one and it will not be
  possible to register a driver binding directly to a struct
  acpi_device. All of the existing users of those drivers in the tree
  were converted to platform drivers in the previous cycles, so this is
  just a final step in a longer journey.

  Apart from the above, there are many fixes, mostly in drivers, with a
  noticeable exception of a fix in the code binding devices to their
  ACPI companions, new IOVT IOMMU support in ACPICA, new _Ixx object
  support for suspend-to-idle on x86, multiple new quirks, mostly
  related to unused ACPI power resources and backlight handling, and
  assorted cleanups.

  Specifics:

   - Make the core ACPI device enumeration code stop attempting to
     initialize ACPI power management for devices before they are known
     to be present and functional (Rafael Wysocki)

   - Simplify and clean up the core ACPI device enumeration code on top
     of the previous adjustment and reduce debug noise coming from it
     (Rafael Wysocki)

   - Fix locking in the code binding devices to their ACPI companions,
     prevent it from replacing a valid ACPI companion pointer with NULL
     incidentally, improve its messaging (including debug noise
     reduction), and reduce its overhead by making it skip the cases in
     which no ACPI companion may exist early (Rafael Wysocki)

   - Reduce runtime memory footprint of struct acpi_device by
     rearranging fields in it (Andy Shevchenko)

   - Update the driver core to allow bus types without drivers to be
     registered as "companion bus types" without driver-related sysfs
     attributes and register the ACPI bus type as a companion one
     (Rafael Wysocki)

   - Use strscpy() instead of strcpy() in the ACPI sysfs interface
     (Ruslan Vagner)

   - Remove __meminitdata from hmat_adist_nb declaration preserving it
     even when CONFIG_MEMORY_HOTPLUG is not set to prevent notifier
     chain corruption in some cases (Alejandro Lucero)

   - Prevent a NULL pointer dereference when attempting to read the
     table length after a mapping bookkeeping failure during an initrd
     override invocation with permanent table mappings enabled (Slavin
     Liu)

   - Use for_each_populated_zone() in get_node_num() in the MRRM table
     pareser (Sang-Heon Jeon)

   - Use vsnprintf() in acpi_os_vprintf() to prevent memory corruption
     resulting from overly long diagnostic messages that may not fit
     into a static buffer used by ACPICA and may be produced by a
     malformed ACPI table (Vlatko Kosturjak)

   - Ignore leading root scope prefix in string _UID match to allow AMD
     IOMMU matching to work as expected in some cases (Mario
     Limonciello)

   - Adjust message printing macros for ACPI objects to use dev_fmt()
     for more consistency with the analogous dev_*() macros (Rafael
     Wysocki)

   - Add _Ixx GPE wake indicator support to the x86 suspend-to-idle
     handling code (Saranya Gopal)

   - Clear driver_data before free in the ACPI PCI Link driver to
     prevent a dangling pointer from being used later (Jiale Yao)

   - Accumulate the queued flag across error sections of a CPER record
     in ghes_do_proc() to prevent it from being cleared by a later
     section or entry that does not queue memory-failure work (Breno
     Leitao)

   - Map a raw PCI AER Capability image field by field to prevent
     information loss from occurring while processing it (Dave Jiang)

   - Update a stale driver source reference in the ACPI APEI EINJ driver
     documentation (Prabhakar Pujeri)

   - Reject CPER records with an out-of-range error_data_length or an
     error status block length wrapping a u32 in the EFI CPER driver
     (Dave Jiang)

   - Address multiple assorted issues in the ACPI extlog driver (Dave
     Jiang)

   - Address two issues related to CXL in the ACPI APEI GHES driver
     (Dave Jiang)

   - Read only validated fields in cper_mem_err_pack() (Dave Jiang)

   - Validate memory error section length before payload access, prevent
     writes past array bounds from occurring and sanitize software
     metadata in the ACPI APEI GHES driver (Dave Jiang)

   - Make cxl_cper_handle_prot_err() static (Dave Jiang)

   - Add IOVT IOMMU support to ACPICA (Bibo Mao)

   - Fix PCC OperationRegion command offsets in ACPICA (Sudeep Holla)

   - Fix memory leak in acpi_ds_create_field() related to the handling
     of internal_pcc_buffer allocations (Breno Leitao)

   - Fix memory leak due to leftover devm_kcalloc() argument in the ACPI
     fan driver (Rafael Wysocki)

   - Fix backlight unregistration ordering in the ACPI video bus device
     driver (Rafael Wysocki)

   - Update the thermal core to allow the registration of thermal class
     cooling devices under specific parents and convert the ACPI fan,
     ACPI processor, and ACPI video bus device drivers to do so (Rafael
     Wysocki)

   - Adjust the ACPI thermal zone driver to use thermal class cooling
     device parent information for binding cooling devices to trip
     points in thermal zones (Rafael Wysocki)

   - Use cooling device data that is a better match for a given driver
     instead of a struct acpi_device pointer that had to be used for
     this purpose previously in the ACPI fan and processor drivers
     (Rafael Wysocki)

   - Fix acpi_thermal_guess_offset() in the ACPI thermal zone driver for
     thermal zone devices with a 273.0°K offset (Hans de Goede)

   - Define a free for ACPI objects allocated by ACPICA helpers and use
     it to simplify AML error handling in the ACPI fan driver (Rafael
     Wysocki)

   - Switch over the users of acpi_get_first_physical_node(), that was
     inherently racy and therefore not really safe to use, to use its
     replacement acpi_bus_get_primary_device(), and eliminate the former
     (Rafael Wysocki)

   - Add !CONFIG_ACPI stubs for acpi_find_child_device() and
     acpi_device_uid() (Mario Limonciello and Robin Murphy)

   - Fix bogus cycle count values on systems without _BIX in the ACPI
     battery driver (Armin Wolf)

   - Fix NULL pointer dereference on allocation failure and report
     relative state of charge as CAPACITY in the ACPI SBS driver (Itay
     Shem-tov and Guangshuo Li)

   - Add lid_init_state quirk for Razer Blade Stealth 13 (Early 2020)
     RZ09-0310 to the ACPI button driver (Ian Gallagher)

   - Add new quirks to force the native backlight on Dell OptiPlex AIO
     7410 35W and Acer Nitro AN515-58 in the ACPI video bus device
     driver (Chitransh Mandhaniya and Dirga Yuza)

   - Fix the shared memory signature handling in the ACPI PCC address
     space handler, free the PCC mailbox channel on operation region
     deactivation, and avoid unnecessary repeated computations of the
     PCC operation region command timeout (Sudeep Holla)

   - Fix a log message typo in the ACPI NUMA support code (Hemanth
     Selam)

   - Zero-initialize capability query result in the ACPI Platform
     Firmware Runtime Update and Telemetry driver to avoid disclosure of
     kernel stack data to user space (Karl Mehltretter)

   - Replace the remaining built-in/module check for CONFIG_ACPI_WMI in
     a header file with IS_ENABLED() macro (Lalit Shankar Chowdhury)

   - Retry probing battery docks after hotplug in the ACPI docking
     station driver to avoid missing ACPI add notifications (Vibhor
     Goel)

   - Detach device after resource transition failure in
     pnp_device_probe() to avoid blocking later manual PNP configuration
     attempts (Myeonghun Pak)"

* tag 'acpi-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (90 commits)
  ACPI: PM: Add Acer Aspire A515-53G to dmi_leave_unused_power_resources_on[]
  ACPI: video: force native backlight on Dell OptiPlex AIO 7410 35W
  ACPI: PM: sleep: Drop unused sleep_no_lps0 define
  ACPI: PM: Add unused power resource quirk for Casper Excalibur G900
  ACPI: dock: Retry probing battery docks after hotplug
  ACPI: PCI: pci_link: clear driver_data before free
  ACPI: APEI: accumulate the queued flag across error sections
  ACPICA: actbl2.h: Add bit constants of the Flags field in the IOVT IOMMU structure
  ACPI: bus: Drop acpi_get_first_physical_node()
  efi/dev-path-parser: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: tas2781: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: cs35l41: Switch to use acpi_bus_get_primary_device()
  iommu/arm-smmu-v3: Switch to use acpi_bus_get_primary_device()
  PCI/AER: Map a raw AER Capability image field by field
  ACPI: NUMA: fix typo in log message
  ACPI: Add stub for acpi_find_child_device()
  driver core/ACPI: Introduce companion_bus_register()
  ACPI: PCC: Cache OpRegion command timeout
  ACPI: PCC: Free channel on OpRegion deactivation
  ACPI: PCC: Preserve shared memory signature in OpRegion handler
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ACPI support updates from Rafael Wysocki:
 "The most significant change here is the rework of the core ACPI device
  enumeration code to avoid initializing ACPI power management
  prematurely for devices with unmet dependencies. This essentially is a
  problem fix, but it requires taking PCI device enumeration ordering
  into account among other things, so it is far from straightforward.
  There was an attempt to do this in the 7.3 time frame that had to be
  reverted, so this time it is done much more carefully.

  There is also an ACPI thermal control update rearranging the code to
  register thermal class cooling devices under specific parents, which
  is visible in sysfs. This helps to figure out what is represented by
  those devices much more easily, but it also allows the binding of
  cooling devices to trip points in thermal zones to be adjusted so it
  need not rely on specific cooling device data usage in thermal
  drivers.

  From the number of commits perspective, the most visible part is the
  one replacing acpi_get_first_physical_node() with
  acpi_bus_get_primary_device() everywhere and dropping the former that
  was inherently racy and generally unsafe to use. Fortunately, the
  maintainers involved responded timely and all of that could be done
  within one development cycle.

  Another quite visible part is Dave Jiang's series fixing multiple
  issues reported by Sashiko in the ACPI APEI support code with a PCI
  AER improvement on top. It took several iterations of this to make
  Sashiko happy and the code in question should be much more robust
  going forward.

  One other thing worth mentioning separately is that the ACPI bus type
  is now going to be registered as a "companion" one and it will not be
  possible to register a driver binding directly to a struct
  acpi_device. All of the existing users of those drivers in the tree
  were converted to platform drivers in the previous cycles, so this is
  just a final step in a longer journey.

  Apart from the above, there are many fixes, mostly in drivers, with a
  noticeable exception of a fix in the code binding devices to their
  ACPI companions, new IOVT IOMMU support in ACPICA, new _Ixx object
  support for suspend-to-idle on x86, multiple new quirks, mostly
  related to unused ACPI power resources and backlight handling, and
  assorted cleanups.

  Specifics:

   - Make the core ACPI device enumeration code stop attempting to
     initialize ACPI power management for devices before they are known
     to be present and functional (Rafael Wysocki)

   - Simplify and clean up the core ACPI device enumeration code on top
     of the previous adjustment and reduce debug noise coming from it
     (Rafael Wysocki)

   - Fix locking in the code binding devices to their ACPI companions,
     prevent it from replacing a valid ACPI companion pointer with NULL
     incidentally, improve its messaging (including debug noise
     reduction), and reduce its overhead by making it skip the cases in
     which no ACPI companion may exist early (Rafael Wysocki)

   - Reduce runtime memory footprint of struct acpi_device by
     rearranging fields in it (Andy Shevchenko)

   - Update the driver core to allow bus types without drivers to be
     registered as "companion bus types" without driver-related sysfs
     attributes and register the ACPI bus type as a companion one
     (Rafael Wysocki)

   - Use strscpy() instead of strcpy() in the ACPI sysfs interface
     (Ruslan Vagner)

   - Remove __meminitdata from hmat_adist_nb declaration preserving it
     even when CONFIG_MEMORY_HOTPLUG is not set to prevent notifier
     chain corruption in some cases (Alejandro Lucero)

   - Prevent a NULL pointer dereference when attempting to read the
     table length after a mapping bookkeeping failure during an initrd
     override invocation with permanent table mappings enabled (Slavin
     Liu)

   - Use for_each_populated_zone() in get_node_num() in the MRRM table
     pareser (Sang-Heon Jeon)

   - Use vsnprintf() in acpi_os_vprintf() to prevent memory corruption
     resulting from overly long diagnostic messages that may not fit
     into a static buffer used by ACPICA and may be produced by a
     malformed ACPI table (Vlatko Kosturjak)

   - Ignore leading root scope prefix in string _UID match to allow AMD
     IOMMU matching to work as expected in some cases (Mario
     Limonciello)

   - Adjust message printing macros for ACPI objects to use dev_fmt()
     for more consistency with the analogous dev_*() macros (Rafael
     Wysocki)

   - Add _Ixx GPE wake indicator support to the x86 suspend-to-idle
     handling code (Saranya Gopal)

   - Clear driver_data before free in the ACPI PCI Link driver to
     prevent a dangling pointer from being used later (Jiale Yao)

   - Accumulate the queued flag across error sections of a CPER record
     in ghes_do_proc() to prevent it from being cleared by a later
     section or entry that does not queue memory-failure work (Breno
     Leitao)

   - Map a raw PCI AER Capability image field by field to prevent
     information loss from occurring while processing it (Dave Jiang)

   - Update a stale driver source reference in the ACPI APEI EINJ driver
     documentation (Prabhakar Pujeri)

   - Reject CPER records with an out-of-range error_data_length or an
     error status block length wrapping a u32 in the EFI CPER driver
     (Dave Jiang)

   - Address multiple assorted issues in the ACPI extlog driver (Dave
     Jiang)

   - Address two issues related to CXL in the ACPI APEI GHES driver
     (Dave Jiang)

   - Read only validated fields in cper_mem_err_pack() (Dave Jiang)

   - Validate memory error section length before payload access, prevent
     writes past array bounds from occurring and sanitize software
     metadata in the ACPI APEI GHES driver (Dave Jiang)

   - Make cxl_cper_handle_prot_err() static (Dave Jiang)

   - Add IOVT IOMMU support to ACPICA (Bibo Mao)

   - Fix PCC OperationRegion command offsets in ACPICA (Sudeep Holla)

   - Fix memory leak in acpi_ds_create_field() related to the handling
     of internal_pcc_buffer allocations (Breno Leitao)

   - Fix memory leak due to leftover devm_kcalloc() argument in the ACPI
     fan driver (Rafael Wysocki)

   - Fix backlight unregistration ordering in the ACPI video bus device
     driver (Rafael Wysocki)

   - Update the thermal core to allow the registration of thermal class
     cooling devices under specific parents and convert the ACPI fan,
     ACPI processor, and ACPI video bus device drivers to do so (Rafael
     Wysocki)

   - Adjust the ACPI thermal zone driver to use thermal class cooling
     device parent information for binding cooling devices to trip
     points in thermal zones (Rafael Wysocki)

   - Use cooling device data that is a better match for a given driver
     instead of a struct acpi_device pointer that had to be used for
     this purpose previously in the ACPI fan and processor drivers
     (Rafael Wysocki)

   - Fix acpi_thermal_guess_offset() in the ACPI thermal zone driver for
     thermal zone devices with a 273.0°K offset (Hans de Goede)

   - Define a free for ACPI objects allocated by ACPICA helpers and use
     it to simplify AML error handling in the ACPI fan driver (Rafael
     Wysocki)

   - Switch over the users of acpi_get_first_physical_node(), that was
     inherently racy and therefore not really safe to use, to use its
     replacement acpi_bus_get_primary_device(), and eliminate the former
     (Rafael Wysocki)

   - Add !CONFIG_ACPI stubs for acpi_find_child_device() and
     acpi_device_uid() (Mario Limonciello and Robin Murphy)

   - Fix bogus cycle count values on systems without _BIX in the ACPI
     battery driver (Armin Wolf)

   - Fix NULL pointer dereference on allocation failure and report
     relative state of charge as CAPACITY in the ACPI SBS driver (Itay
     Shem-tov and Guangshuo Li)

   - Add lid_init_state quirk for Razer Blade Stealth 13 (Early 2020)
     RZ09-0310 to the ACPI button driver (Ian Gallagher)

   - Add new quirks to force the native backlight on Dell OptiPlex AIO
     7410 35W and Acer Nitro AN515-58 in the ACPI video bus device
     driver (Chitransh Mandhaniya and Dirga Yuza)

   - Fix the shared memory signature handling in the ACPI PCC address
     space handler, free the PCC mailbox channel on operation region
     deactivation, and avoid unnecessary repeated computations of the
     PCC operation region command timeout (Sudeep Holla)

   - Fix a log message typo in the ACPI NUMA support code (Hemanth
     Selam)

   - Zero-initialize capability query result in the ACPI Platform
     Firmware Runtime Update and Telemetry driver to avoid disclosure of
     kernel stack data to user space (Karl Mehltretter)

   - Replace the remaining built-in/module check for CONFIG_ACPI_WMI in
     a header file with IS_ENABLED() macro (Lalit Shankar Chowdhury)

   - Retry probing battery docks after hotplug in the ACPI docking
     station driver to avoid missing ACPI add notifications (Vibhor
     Goel)

   - Detach device after resource transition failure in
     pnp_device_probe() to avoid blocking later manual PNP configuration
     attempts (Myeonghun Pak)"

* tag 'acpi-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (90 commits)
  ACPI: PM: Add Acer Aspire A515-53G to dmi_leave_unused_power_resources_on[]
  ACPI: video: force native backlight on Dell OptiPlex AIO 7410 35W
  ACPI: PM: sleep: Drop unused sleep_no_lps0 define
  ACPI: PM: Add unused power resource quirk for Casper Excalibur G900
  ACPI: dock: Retry probing battery docks after hotplug
  ACPI: PCI: pci_link: clear driver_data before free
  ACPI: APEI: accumulate the queued flag across error sections
  ACPICA: actbl2.h: Add bit constants of the Flags field in the IOVT IOMMU structure
  ACPI: bus: Drop acpi_get_first_physical_node()
  efi/dev-path-parser: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: tas2781: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: cs35l41: Switch to use acpi_bus_get_primary_device()
  iommu/arm-smmu-v3: Switch to use acpi_bus_get_primary_device()
  PCI/AER: Map a raw AER Capability image field by field
  ACPI: NUMA: fix typo in log message
  ACPI: Add stub for acpi_find_child_device()
  driver core/ACPI: Introduce companion_bus_register()
  ACPI: PCC: Cache OpRegion command timeout
  ACPI: PCC: Free channel on OpRegion deactivation
  ACPI: PCC: Preserve shared memory signature in OpRegion handler
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'kbuild-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux</title>
<updated>2026-10-21T20:45:44+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-10-21T20:45:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=bb29b957eaaa15be33243550d9ee576c2d601669'/>
<id>bb29b957eaaa15be33243550d9ee576c2d601669</id>
<content type='text'>
Pull Kbuild / Kconfig updates from Nathan Chancellor:
 "Kbuild:

   - Suppress compiler flags in debug info for external module builds

   - Use '-fmacro-prefix-map' in more places in the build

   - Merge initial set of changes from Lorenzo's speed up series, along
     with some fixes found through testing:

     - Avoid allocating .modinfo in vmlinux

     - Speed up kallsyms by indexing symbols by token and outputting
       binary data to disk directly then including in assembly via
       .incbin

     - Don't sort $(NM) output when unnecessary

     - Only emit relocations on the final vmlinx link

     - Reimplement mksysmap in C

     - Move many cc-option and ld-option calls into the Kconfig stage to
       cache their results

     - Use pigz for gzip compression when available

   - Move gen_init_cpio and gen_initramfs.sh from usr/ to scripts/

   - Add a TOML configuration to scripts/container and update
     documentation accordingly

   - Add a generic, opt-in mechanism for checking that headers can
     compile standalone

   - Update machine function splitting argument for LLVM 24 rename in
     AutoFDO build

   - Miscellaneous minor clean ups, fixes, and hardening, mostly
     found/fixed via LLMs

  Kconfig:

   - Turn recursive ranges into an error

   - Fix savedefconfig for defaults that were adjusted for being out of
     range and revert a previously applied workaround

   - Improvements and hardening around integer and hexadecimal values

   - Emit a warning when selecting or implying a choice symbol, which
     has no effect

   - Emit a warning when KCONFIG_PROBABILITY is malformed

   - Introduce def_string / def_int / def_hex to mirror the existing
     def_bool / def_tristate to succinctly set a value and type at the
     same time.

   - Add cc-option-str and ld-option-str macros to act like Kbuild's
     cc-option and ld-option, returning the string when the option is
     supported, allowing many checks to be moved into Kconfig

   - Minor usability improvements to Kconfig tests"

* tag 'kbuild-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (59 commits)
  kbuild: AutoFDO: Update split machine function argument for upstream rename
  kbuild: Mark the initcall ordering recipe as recursive
  kbuild: Mark the gzip recipes as recursive
  localmodconfig: Explicitly report boolean configs during integrity check
  scripts/make_fit: Ignore schema checks when decomposing DTBs
  clang-tools: Import os for broken pipe handling
  kconfig: use the value argument in sym_get_near_range_bound()
  kconfig: fix infinite loop in conf_choice() when no choice value is visible
  kconfig: cleanup stale comment about 'keys' array
  kconfig: Improve ergonomics around disabling warnings with cc-option
  scripts/Kconfig.toolchain: Drop compiler symbols from dependencies
  checkkconfigsymbols.py: Parse Git status output line by line
  gen_init_cpio: stop parsing on lines with a missing argument list
  .gitignore: drop Module.markers
  .gitignore: ignore pacman package signatures
  kbuild: add header check facility as a manually run static analyzer
  Documentation: dev-tools: refer to user ID rather than id
  Documentation: dev-tools: update container.rst with config file
  scripts: add TOML config to container tool
  kconfig: tests: {old,save}defconfig: Forward dynamic keyword arguments
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull Kbuild / Kconfig updates from Nathan Chancellor:
 "Kbuild:

   - Suppress compiler flags in debug info for external module builds

   - Use '-fmacro-prefix-map' in more places in the build

   - Merge initial set of changes from Lorenzo's speed up series, along
     with some fixes found through testing:

     - Avoid allocating .modinfo in vmlinux

     - Speed up kallsyms by indexing symbols by token and outputting
       binary data to disk directly then including in assembly via
       .incbin

     - Don't sort $(NM) output when unnecessary

     - Only emit relocations on the final vmlinx link

     - Reimplement mksysmap in C

     - Move many cc-option and ld-option calls into the Kconfig stage to
       cache their results

     - Use pigz for gzip compression when available

   - Move gen_init_cpio and gen_initramfs.sh from usr/ to scripts/

   - Add a TOML configuration to scripts/container and update
     documentation accordingly

   - Add a generic, opt-in mechanism for checking that headers can
     compile standalone

   - Update machine function splitting argument for LLVM 24 rename in
     AutoFDO build

   - Miscellaneous minor clean ups, fixes, and hardening, mostly
     found/fixed via LLMs

  Kconfig:

   - Turn recursive ranges into an error

   - Fix savedefconfig for defaults that were adjusted for being out of
     range and revert a previously applied workaround

   - Improvements and hardening around integer and hexadecimal values

   - Emit a warning when selecting or implying a choice symbol, which
     has no effect

   - Emit a warning when KCONFIG_PROBABILITY is malformed

   - Introduce def_string / def_int / def_hex to mirror the existing
     def_bool / def_tristate to succinctly set a value and type at the
     same time.

   - Add cc-option-str and ld-option-str macros to act like Kbuild's
     cc-option and ld-option, returning the string when the option is
     supported, allowing many checks to be moved into Kconfig

   - Minor usability improvements to Kconfig tests"

* tag 'kbuild-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (59 commits)
  kbuild: AutoFDO: Update split machine function argument for upstream rename
  kbuild: Mark the initcall ordering recipe as recursive
  kbuild: Mark the gzip recipes as recursive
  localmodconfig: Explicitly report boolean configs during integrity check
  scripts/make_fit: Ignore schema checks when decomposing DTBs
  clang-tools: Import os for broken pipe handling
  kconfig: use the value argument in sym_get_near_range_bound()
  kconfig: fix infinite loop in conf_choice() when no choice value is visible
  kconfig: cleanup stale comment about 'keys' array
  kconfig: Improve ergonomics around disabling warnings with cc-option
  scripts/Kconfig.toolchain: Drop compiler symbols from dependencies
  checkkconfigsymbols.py: Parse Git status output line by line
  gen_init_cpio: stop parsing on lines with a missing argument list
  .gitignore: drop Module.markers
  .gitignore: ignore pacman package signatures
  kbuild: add header check facility as a manually run static analyzer
  Documentation: dev-tools: refer to user ID rather than id
  Documentation: dev-tools: update container.rst with config file
  scripts: add TOML config to container tool
  kconfig: tests: {old,save}defconfig: Forward dynamic keyword arguments
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'acpi-driver'</title>
<updated>2026-10-19T11:32:55+00:00</updated>
<author>
<name>Rafael J. Wysocki</name>
<email>rafael.j.wysocki@intel.com</email>
</author>
<published>2026-10-19T11:32:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=8669f2b6c96c89dab028b294fa069a672989afad'/>
<id>8669f2b6c96c89dab028b294fa069a672989afad</id>
<content type='text'>
Merge changes related to ACPI support in device drivers for 7.4:

 - Switch over the users of acpi_get_first_physical_node(), that
   was inherently racy and therefore not really safe to use, to use
   its replacement acpi_bus_get_primary_device(), and eliminate the
   former (Rafael Wysocki)

 - Add !CONFIG_ACPI stubs for acpi_find_child_device() and
   acpi_device_uid() (Mario Limonciello and Robin Murphy)

* acpi-driver:
  ACPI: bus: Drop acpi_get_first_physical_node()
  efi/dev-path-parser: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: tas2781: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: cs35l41: Switch to use acpi_bus_get_primary_device()
  iommu/arm-smmu-v3: Switch to use acpi_bus_get_primary_device()
  ACPI: Add stub for acpi_find_child_device()
  ACPI: bus: Provide !ACPI stub for acpi_device_uid()
  ALSA: hda: aw88399: Switch to use acpi_bus_get_primary_device()
  ASoC: loongson: Switch to use acpi_bus_get_primary_device()
  ASoC: intel: boards: Switch to use acpi_bus_get_primary_device()
  ASoC: amd: acp3x-es83xx: Switch to use acpi_bus_get_primary_device()
  ASoC: amd: acp-es8336: Switch to use acpi_bus_get_primary_device()
  thunderbolt: Switch to use acpi_bus_get_primary_device()
  platform/x86: apple-gmux: Switch to use acpi_bus_get_primary_device()
  platform/x86: x86-android-tablets: Use acpi_bus_get_primary_device()
  platform/x86: serdev_helpers: Switch to use acpi_bus_get_primary_device()
  platform/x86: yogabook: Switch to use acpi_bus_get_primary_device()
  ACPI: amba: Switch to use acpi_bus_get_primary_device()
  ACPI: bus: Use acpi/acpi_bus.h without CONFIG_ACPI
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Merge changes related to ACPI support in device drivers for 7.4:

 - Switch over the users of acpi_get_first_physical_node(), that
   was inherently racy and therefore not really safe to use, to use
   its replacement acpi_bus_get_primary_device(), and eliminate the
   former (Rafael Wysocki)

 - Add !CONFIG_ACPI stubs for acpi_find_child_device() and
   acpi_device_uid() (Mario Limonciello and Robin Murphy)

* acpi-driver:
  ACPI: bus: Drop acpi_get_first_physical_node()
  efi/dev-path-parser: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: tas2781: Switch to use acpi_bus_get_primary_device()
  ALSA: hda: cs35l41: Switch to use acpi_bus_get_primary_device()
  iommu/arm-smmu-v3: Switch to use acpi_bus_get_primary_device()
  ACPI: Add stub for acpi_find_child_device()
  ACPI: bus: Provide !ACPI stub for acpi_device_uid()
  ALSA: hda: aw88399: Switch to use acpi_bus_get_primary_device()
  ASoC: loongson: Switch to use acpi_bus_get_primary_device()
  ASoC: intel: boards: Switch to use acpi_bus_get_primary_device()
  ASoC: amd: acp3x-es83xx: Switch to use acpi_bus_get_primary_device()
  ASoC: amd: acp-es8336: Switch to use acpi_bus_get_primary_device()
  thunderbolt: Switch to use acpi_bus_get_primary_device()
  platform/x86: apple-gmux: Switch to use acpi_bus_get_primary_device()
  platform/x86: x86-android-tablets: Use acpi_bus_get_primary_device()
  platform/x86: serdev_helpers: Switch to use acpi_bus_get_primary_device()
  platform/x86: yogabook: Switch to use acpi_bus_get_primary_device()
  ACPI: amba: Switch to use acpi_bus_get_primary_device()
  ACPI: bus: Use acpi/acpi_bus.h without CONFIG_ACPI
</pre>
</div>
</content>
</entry>
<entry>
<title>lkdtm: Add more EFI runtime tests</title>
<updated>2026-10-18T08:28:29+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ardb@kernel.org</email>
</author>
<published>2026-10-11T11:20:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=2c493ac8c347167eec9e4e985d2b58d5fa6fd420'/>
<id>2c493ac8c347167eec9e4e985d2b58d5fa6fd420</id>
<content type='text'>
Two bugs were found in the arm64 EFI runtime support that weren't caught
by LKDTM. The existing EFI_RUNTIME_CRASH test instructs the firmware to
write to kernel memory that is mapped read-only, which usually fails as
expected. However, this does not exercise the runtime mapping logic in
the kernel, nor the fault recovery logic when the faulting address is
inside the EFI runtime memory regions itself.

So add two more test cases:
- a write to R/O memory test that uses the firmware's own executable
  memory as an output buffer
- a branch to memory that is occupied by the firmware's runtime services
  function table, which is usually mapped non-execute.

This depends on the EFI memory attributes table having been exposed by
the firmware and having been taken into account by the runtime mapping
code, so this is used as a prerequisite by the new tests, otherwise it
produces an XFAIL.

Reviewed-by: Kees Cook &lt;kees@kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Two bugs were found in the arm64 EFI runtime support that weren't caught
by LKDTM. The existing EFI_RUNTIME_CRASH test instructs the firmware to
write to kernel memory that is mapped read-only, which usually fails as
expected. However, this does not exercise the runtime mapping logic in
the kernel, nor the fault recovery logic when the faulting address is
inside the EFI runtime memory regions itself.

So add two more test cases:
- a write to R/O memory test that uses the firmware's own executable
  memory as an output buffer
- a branch to memory that is occupied by the firmware's runtime services
  function table, which is usually mapped non-execute.

This depends on the EFI memory attributes table having been exposed by
the firmware and having been taken into account by the runtime mapping
code, so this is used as a prerequisite by the new tests, otherwise it
produces an XFAIL.

Reviewed-by: Kees Cook &lt;kees@kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi: Initialize all configuration table addresses to EFI_INVALID_TABLE_ADDR</title>
<updated>2026-10-15T11:53:08+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ardb@kernel.org</email>
</author>
<published>2026-10-12T12:19:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=da0ad36d2e95fb029c3a14ad99a78beebc29507f'/>
<id>da0ad36d2e95fb029c3a14ad99a78beebc29507f</id>
<content type='text'>
The addresses of the MOK variable table, the confidential computing
secret area and the unaccepted memory table in struct efi are only
initialized to EFI_INVALID_TABLE_ADDR if support for the respective
table is enabled, and are left at 0 otherwise. This is harmless for
the existing users, which are compiled out in that case, but code that
consumes the table addresses in struct efi generically, such as a kexec
loader that passes the configuration tables on to the incoming kernel,
would mistake 0 for a valid table address.

So initialize all of them unconditionally: efi_config_parse_tables()
only assigns them if support for the table is enabled, and so they
remain EFI_INVALID_TABLE_ADDR otherwise.

Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The addresses of the MOK variable table, the confidential computing
secret area and the unaccepted memory table in struct efi are only
initialized to EFI_INVALID_TABLE_ADDR if support for the respective
table is enabled, and are left at 0 otherwise. This is harmless for
the existing users, which are compiled out in that case, but code that
consumes the table addresses in struct efi generically, such as a kexec
loader that passes the configuration tables on to the incoming kernel,
would mistake 0 for a valid table address.

So initialize all of them unconditionally: efi_config_parse_tables()
only assigns them if support for the table is enabled, and so they
remain EFI_INVALID_TABLE_ADDR otherwise.

Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi: Retain the address of the LINUX_EFI_MEMRESERVE table</title>
<updated>2026-10-15T11:53:08+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ardb@kernel.org</email>
</author>
<published>2026-10-12T09:59:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a278b88b766128e6ef5a5de0f350d897ccd14cb6'/>
<id>a278b88b766128e6ef5a5de0f350d897ccd14cb6</id>
<content type='text'>
The physical address of the LINUX_EFI_MEMRESERVE configuration table is
only kept in __initdata, but a kexec loader that runs the incoming
kernel's EFI stub needs it in order to pass the table on, so that the
persistent memory reservations made by this kernel and its predecessors
(e.g., for the GICv3 LPI tables) are carried over.

So move it into struct efi, alongside the addresses of the other EFI
configuration tables that may be passed on in this way.

Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The physical address of the LINUX_EFI_MEMRESERVE configuration table is
only kept in __initdata, but a kexec loader that runs the incoming
kernel's EFI stub needs it in order to pass the table on, so that the
persistent memory reservations made by this kernel and its predecessors
(e.g., for the GICv3 LPI tables) are carried over.

So move it into struct efi, alongside the addresses of the other EFI
configuration tables that may be passed on in this way.

Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi/libstub: Don't replace an existing LINUX_EFI_MEMRESERVE table</title>
<updated>2026-10-15T11:53:08+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ardb@kernel.org</email>
</author>
<published>2026-10-12T12:06:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=aaf3ed0f46298e18ec8bc477cf0a37478e41f2ea'/>
<id>aaf3ed0f46298e18ec8bc477cf0a37478e41f2ea</id>
<content type='text'>
The LINUX_EFI_MEMRESERVE table is the root of a linked list of memory
reservations that need to persist across kexec, such as the GICv3 LPI
pending and property tables, which cannot be moved once the
redistributors have been enabled. Each kernel adds its own reservations
to the list that it finds via the EFI configuration table, and honours
the ones made by its predecessors.

The EFI stub installs a new, empty table unconditionally, replacing any
existing one. This is fine on a cold boot, but not if the stub is being
executed by a loader that passes on the configuration tables of an
earlier kernel, e.g., a kexec loader that runs the incoming kernel's EFI
stub, as the reservations made by earlier kernels would be lost.

So leave an existing table in place, and only install a new one if none
exists yet.

Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The LINUX_EFI_MEMRESERVE table is the root of a linked list of memory
reservations that need to persist across kexec, such as the GICv3 LPI
pending and property tables, which cannot be moved once the
redistributors have been enabled. Each kernel adds its own reservations
to the list that it finds via the EFI configuration table, and honours
the ones made by its predecessors.

The EFI stub installs a new, empty table unconditionally, replacing any
existing one. This is fine on a cold boot, but not if the stub is being
executed by a loader that passes on the configuration tables of an
earlier kernel, e.g., a kexec loader that runs the incoming kernel's EFI
stub, as the reservations made by earlier kernels would be lost.

So leave an existing table in place, and only install a new one if none
exists yet.

Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
