Pull EFI fix from Thomas Gleixner:
 "A single fix to prevent partially initialized pointers in mixed mode
  (64bit kernel on 32bit UEFI)"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub/tpm: Initialize pointer variables to zero for mixed mode

Update the initcall ordering to satisfy the following dependency
ordering:

1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI

By assigning them to the following initcall levels:

subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

As reported by Jeremy Cline, running the new TPM libstub code in mixed
mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking
the TCG2 protocol, or when accessing the log_tbl pool allocation.

The reason turns out to be that in both cases, the 64-bit pointer
variables are not fully initialized by the 32-bit EFI code, and so
we should take care to zero initialize these variables beforehand,
or we'll end up dereferencing bogus pointers.

Reported-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hdegoede@redhat.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: javierm@redhat.com
Cc: linux-efi@vger.kernel.org
Cc: tweek@google.com
Link: http://lkml.kernel.org/r/20180313140922.17266-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull more arm64 updates from Catalin Marinas:
 "As I mentioned in the last pull request, there's a second batch of
  security updates for arm64 with mitigations for Spectre/v1 and an
  improved one for Spectre/v2 (via a newly defined firmware interface
  API).

  Spectre v1 mitigation:

   - back-end version of array_index_mask_nospec()

   - masking of the syscall number to restrict speculation through the
     syscall table

   - masking of __user pointers prior to deference in uaccess routines

  Spectre v2 mitigation update:

   - using the new firmware SMC calling convention specification update

   - removing the current PSCI GET_VERSION firmware call mitigation as
     vendors are deploying new SMCCC-capable firmware

   - additional branch predictor hardening for synchronous exceptions
     and interrupts while in user mode

  Meltdown v3 mitigation update:

    - Cavium Thunder X is unaffected but a hardware erratum gets in the
      way. The kernel now starts with the page tables mapped as global
      and switches to non-global if kpti needs to be enabled.

  Other:

   - Theoretical trylock bug fixed"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (38 commits)
  arm64: Kill PSCI_GET_VERSION as a variant-2 workaround
  arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support
  arm/arm64: smccc: Implement SMCCC v1.1 inline primitive
  arm/arm64: smccc: Make function identifiers an unsigned quantity
  firmware/psci: Expose SMCCC version through psci_ops
  firmware/psci: Expose PSCI conduit
  arm64: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling
  arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support
  arm/arm64: KVM: Turn kvm_psci_version into a static inline
  arm/arm64: KVM: Advertise SMCCC v1.1
  arm/arm64: KVM: Implement PSCI 1.0 support
  arm/arm64: KVM: Add smccc accessors to PSCI code
  arm/arm64: KVM: Add PSCI_VERSION helper
  arm/arm64: KVM: Consolidate the PSCI include files
  arm64: KVM: Increment PC after handling an SMC trap
  arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
  arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
  arm64: entry: Apply BP hardening for suspicious interrupts from EL0
  arm64: entry: Apply BP hardening for high-priority synchronous exceptions
  arm64: futex: Mask __user pointers prior to dereference
  ...

Pull virtio/vhost updates from Michael Tsirkin:
 "virtio, vhost: fixes, cleanups, features

  This includes the disk/cache memory stats for for the virtio balloon,
  as well as multiple fixes and cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: don't hold onto file pointer for VHOST_SET_LOG_FD
  vhost: don't hold onto file pointer for VHOST_SET_VRING_ERR
  vhost: don't hold onto file pointer for VHOST_SET_VRING_CALL
  ringtest: ring.c malloc & memset to calloc
  virtio_vop: don't kfree device on register failure
  virtio_pci: don't kfree device on register failure
  virtio: split device_register into device_initialize and device_add
  vhost: remove unused lock check flag in vhost_dev_cleanup()
  vhost: Remove the unused variable.
  virtio_blk: print capacity at probe time
  virtio: make VIRTIO a menuconfig to ease disabling it all
  virtio/ringtest: virtio_ring: fix up need_event math
  virtio/ringtest: fix up need_event math
  virtio: virtio_mmio: make of_device_ids const.
  firmware: Use PTR_ERR_OR_ZERO()
  virtio-mmio: Use PTR_ERR_OR_ZERO()
  vhost/scsi: Improve a size determination in four functions
  virtio_balloon: include disk/file caches memory statistics

Since PSCI 1.0 allows the SMCCC version to be (indirectly) probed,
let's do that at boot time, and expose the version of the calling
convention as part of the psci_ops structure.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

In order to call into the firmware to apply workarounds, it is
useful to find out whether we're using HVC or SMC. Let's expose
this through the psci_ops.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull PCI updates from Bjorn Helgaas:

 - skip AER driver error recovery callbacks for correctable errors
   reported via ACPI APEI, as we already do for errors reported via the
   native path (Tyler Baicar)

 - fix DPC shared interrupt handling (Alex Williamson)

 - print full DPC interrupt number (Keith Busch)

 - enable DPC only if AER is available (Keith Busch)

 - simplify DPC code (Bjorn Helgaas)

 - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
   Helgaas)

 - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
   Helgaas)

 - move ASPM internal interfaces out of public header (Bjorn Helgaas)

 - allow hot-removal of VGA devices (Mika Westerberg)

 - speed up unplug and shutdown by assuming Thunderbolt controllers
   don't support Command Completed events (Lukas Wunner)

 - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
   Jay Cornwall)

 - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)

 - clean up PCI DMA interface usage (Christoph Hellwig)

 - remove PCI pool API (replaced with DMA pool) (Romain Perier)

 - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
   Kaya)

 - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)

 - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)

 - remove warnings on sysfs mmap failure (Bjorn Helgaas)

 - quiet ROM validation messages (Alex Deucher)

 - remove redundant memory alloc failure messages (Markus Elfring)

 - fill in types for compile-time VGA and other I/O port resources
   (Bjorn Helgaas)

 - make "pci=pcie_scan_all" work for Root Ports as well as Downstream
   Ports to help AmigaOne X1000 (Bjorn Helgaas)

 - add SPDX tags to all PCI files (Bjorn Helgaas)

 - quirk Marvell 9128 DMA aliases (Alex Williamson)

 - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)

 - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
   Cassel)

 - use DMA API to get MSI address for DesignWare IP (Niklas Cassel)

 - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)

 - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)

 - add support for ARTPEC-7 SoC (Niklas Cassel)

 - add endpoint-mode support for ARTPEC (Niklas Cassel)

 - add Cadence PCIe host and endpoint controller driver (Cyrille
   Pitchen)

 - handle multiple INTx status bits being set in dra7xx (Vignesh R)

 - translate dra7xx hwirq range to fix INTD handling (Vignesh R)

 - remove deprecated Exynos PHY initialization code (Jaehoon Chung)

 - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)

 - fix NULL pointer dereference in iProc BCMA driver (Ray Jui)

 - fix Keystone interrupt-controller-node lookup (Johan Hovold)

 - constify qcom driver structures (Julia Lawall)

 - rework Tegra config space mapping to increase space available for
   endpoints (Vidya Sagar)

 - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)

 - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)

 - add support for Global Fabric Manager Server (GFMS) event to
   Microsemi Switchtec switch driver (Logan Gunthorpe)

 - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)

* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
  PCI: endpoint: Fix EPF device name to support multi-function devices
  PCI: endpoint: Add the function number as argument to EPC ops
  PCI: cadence: Add host driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
  PCI: Add vendor ID for Cadence
  PCI: Add generic function to probe PCI host controllers
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  ...

Pull dmi subsystem updates/fixes from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: handle missing DMI data gracefully
  firmware: dmi_scan: Fix handling of empty DMI strings
  firmware: dmi_scan: Drop dmi_initialized
  firmware: dmi: Optimize dmi_matches

Currently, when booting a kernel with DMI support on a platform that has
no DMI tables, the following output is emitted into the kernel log:

  [    0.128818] DMI not present or invalid.
  ...
  [    1.306659] dmi: Firmware registration failed.
  ...
  [    2.908681] dmi-sysfs: dmi entry is absent.

The first one is a pr_info(), but the subsequent ones are pr_err()s that
complain about a condition that is not really an error to begin with.

So let's clean this up, and give up silently if dma_available is not set.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Jean Delvare <jdelvare@suse.de>