Pull thermal updates from Daniel Lezcano:

 - Add the tegra3 thermal sensor and fix the compilation testing on
   tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
   (Dmitry Osipenko)

 - Fix the error code for the exynos when devm_get_clk() fails (Dan
   Carpenter)

 - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)

 - Add support for hardware trip points for the rcar gen3 thermal driver
   and store TSC id as unsigned int (Niklas Söderlund)

 - Replace the deprecated CPU-hotplug functions get_online_cpus() and
   put_online_cpus (Sebastian Andrzej Siewior)

 - Add the thermal tools directory in the MAINTAINERS file (Daniel
   Lezcano)

 - Fix the Makefile and the cross compilation flags for the userspace
   'tmon' tool (Rolf Eike Beer)

 - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
   Pawnikar)

 - Fix the stub thermal_cooling_device_register() function prototype
   which does not match the real function (Arnd Bergmann)

 - Make the thermal trip point optional in the DT bindings (Maxime
   Ripard)

 - Fix a typo in a comment in the core code (Geert Uytterhoeven)

 - Reduce the verbosity of the trace in the SoC thermal tegra driver
   (Dmitry Osipenko)

 - Add the support for the LMh (Limit Management hardware) driver on the
   QCom platforms (Thara Gopinath)

 - Allow processing of HWP interrupt by adding a weak function in the
   Intel driver (Srinivas Pandruvada)

 - Prevent an abort of the sensor probe is a channel is not used
   (Matthias Kaehlcke)

* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
  thermal/drivers/intel: Allow processing of HWP interrupt
  dt-bindings: thermal: Add dt binding for QCOM LMh
  thermal/drivers/qcom: Add support for LMh driver
  firmware: qcom_scm: Introduce SCM calls to access LMh
  thermal/drivers/tegra-soctherm: Silence message about clamped temperature
  thermal: Spelling s/scallbacks/callbacks/
  dt-bindings: thermal: Make trips node optional
  thermal/core: Fix thermal_cooling_device_register() prototype
  thermal/drivers/int340x: Use IMOK independently
  tools/thermal/tmon: Add cross compiling support
  thermal/tools/tmon: Improve the Makefile
  MAINTAINERS: Add missing userspace thermal tools to the thermal section
  thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
  thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
  thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
  drivers/thermal/intel: Add TCC cooling support for AlderLake platform
  thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
  thermal/drivers/tegra: Correct compile-testing of drivers
  thermal/drivers/tegra: Add driver for Tegra30 thermal sensor

Pull dmi fix from Jean Delvare.

Unbreak some existing udev/hwdb modalias matches due to misplaced
product_sku field.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Move product_sku info to the end of the modalias

Pull Kbuild updates from Masahiro Yamada:

 - Add -s option (strict mode) to merge_config.sh to make it fail when
   any symbol is redefined.

 - Show a warning if a different compiler is used for building external
   modules.

 - Infer --target from ARCH for CC=clang to let you cross-compile the
   kernel without CROSS_COMPILE.

 - Make the integrated assembler default (LLVM_IAS=1) for CC=clang.

 - Add <linux/stdarg.h> to the kernel source instead of borrowing
   <stdarg.h> from the compiler.

 - Add Nick Desaulniers as a Kbuild reviewer.

 - Drop stale cc-option tests.

 - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
   to handle symbols in inline assembly.

 - Show a warning if 'FORCE' is missing for if_changed rules.

 - Various cleanups

* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
  kbuild: redo fake deps at include/ksym/*.h
  kbuild: clean up objtool_args slightly
  modpost: get the *.mod file path more simply
  checkkconfigsymbols.py: Fix the '--ignore' option
  kbuild: merge vmlinux_link() between ARCH=um and other architectures
  kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
  kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
  kbuild: remove stale *.symversions
  kbuild: remove unused quiet_cmd_update_lto_symversions
  gen_compile_commands: extract compiler command from a series of commands
  x86: remove cc-option-yn test for -mtune=
  arc: replace cc-option-yn uses with cc-option
  s390: replace cc-option-yn uses with cc-option
  ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
  sparc: move the install rule to arch/sparc/Makefile
  security: remove unneeded subdir-$(CONFIG_...)
  kbuild: sh: remove unused install script
  kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
  kbuild: Switch to 'f' variants of integrated assembler flag
  kbuild: Shuffle blank line to improve comment meaning
  ...

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  iscsi_ibft: Fix isa_bus_to_virt not working under ARM

The isa_bus_to_virt is only needed under X86 and in fact the code
that sets the ibft_phys_addr is only compiled under X86.

As such lets just ifdef the code.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com>
CC: Maurizio Lombardi <mlombard@redhat.com>
CC: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
v2: Remove the ibft_phys_addr as it is defined in iscsi_ibft.h

Commit e26f023e01ef ("firmware/dmi: Include product_sku info to modalias")
added a new field to the modalias in the middle of the modalias, breaking
some existing udev/hwdb matches on the whole modalias without a wildcard
('*') in between the pvr and rvn fields.

All modalias matches in e.g. :
https://github.com/systemd/systemd/blob/main/hwdb.d/60-sensor.hwdb
deliberately end in ':*' so that new fields can be added at *the end* of
the modalias, but adding a new field in the middle like this breaks things.

Move the new sku field to the end of the modalias to fix some hwdb
entries no longer matching.

The new sku field has already been put to use in 2 new hwdb entries:

 sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0A3E:*
  ACCEL_LOCATION=base

 sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0B0B:*
  ACCEL_LOCATION=base

The wildcard use before and after the sku in these matches means that they
should keep working with the sku moved to the end.

Note that there is a second instance of in essence the same problem,
commit f5152f4ded3c ("firmware/dmi: Report DMI Bios & EC firmware release")

Added 2 new br and efr fields in the middle of the modalias. This too
breaks some hwdb modalias matches, but this has gone unnoticed for over
a year. So some newer hwdb modalias matches actually depend on these
fields being in the middle of the string. Moving these to the end now
would break 3 hwdb entries, while fixing 8 entries.

Since there is no good answer for the new br and efr fields I have chosen
to leave these as is. Instead I'll submit a hwdb update to put a wildcard
at the place where these fields may or may not be present depending on the
kernel version.

BugLink: https://github.com/systemd/systemd/issues/20550
Link: https://github.com/systemd/systemd/pull/20562
Fixes: e26f023e01ef ("firmware/dmi: Include product_sku info to modalias")
Cc: stable@vger.kernel.org
Cc: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com>
Cc: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...

Pull drm updates from Dave Airlie:
 "Highlights:

   - i915 has seen a lot of refactoring and uAPI cleanups due to a
     change in the upstream direction going forward

     This has all been audited with known userspace, but there may be
     some pitfalls that were missed.

   - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs

   - i915 enables Jasper and Elkhart Lake by default and has preliminary
     XeHP/DG2 support

   - amdgpu adds support for Cyan Skillfish

   - lots of implicit fencing rules documented and fixed up in drivers

   - msm now uses the core scheduler

   - the irq midlayer has been removed for non-legacy drivers

   - the sysfb code now works on more than x86.

  Otherwise the usual smattering of stuff everywhere, panels, bridges,
  refactorings.

  Detailed summary:

  core:
   - extract i915 eDP backlight into core
   - DP aux bus support
   - drm_device.irq_enabled removed
   - port drivers to native irq interfaces
   - export gem shadow plane handling for vgem
   - print proper driver name in framebuffer registration
   - driver fixes for implicit fencing rules
   - ARM fixed rate compression modifier added
   - updated fb damage handling
   - rmfb ioctl logging/docs
   - drop drm_gem_object_put_locked
   - define DRM_FORMAT_MAX_PLANES
   - add gem fb vmap/vunmap helpers
   - add lockdep_assert(once) helpers
   - mark drm irq midlayer as legacy
   - use offset adjusted bo mapping conversion

  vgaarb:
   - cleanups

  fbdev:
   - extend efifb handling to all arches
   - div by 0 fixes for multiple drivers

  udmabuf:
   - add hugepage mapping support

  dma-buf:
   - non-dynamic exporter fixups
   - document implicit fencing rules

  amdgpu:
   - Initial Cyan Skillfish support
   - switch virtual DCE over to vkms based atomic
   - VCN/JPEG power down fixes
   - NAVI PCIE link handling fixes
   - AMD HDMI freesync fixes
   - Yellow Carp + Beige Goby fixes
   - Clockgating/S0ix/SMU/EEPROM fixes
   - embed hw fence in job
   - rework dma-resv handling
   - ensure eviction to system ram

  amdkfd:
   - uapi: SVM address range query added
   - sysfs leak fix
   - GPUVM TLB optimizations
   - vmfault/migration counters

  i915:
   - Enable JSL and EHL by default
   - preliminary XeHP/DG2 support
   - remove all CNL support (never shipped)
   - move to TTM for discrete memory support
   - allow mixed object mmap handling
   - GEM uAPI spring cleaning
       - add I915_MMAP_OBJECT_FIXED
       - reinstate ADL-P mmap ioctls
       - drop a bunch of unused by userspace features
       - disable and remove GPU relocations
   - revert some i915 misfeatures
   - major refactoring of GuC for Gen11+
   - execbuffer object locking separate step
   - reject caching/set-domain on discrete
   - Enable pipe DMC loading on XE-LPD and ADL-P
   - add PSF GV point support
   - Refactor and fix DDI buffer translations
   - Clean up FBC CFB allocation code
   - Finish INTEL_GEN() and friends macro conversions

  nouveau:
   - add eDP backlight support
   - implicit fence fix

  msm:
   - a680/7c3 support
   - drm/scheduler conversion

  panfrost:
   - rework GPU reset

  virtio:
   - fix fencing for planes

  ast:
   - add detect support

  bochs:
   - move to tiny GPU driver

  vc4:
   - use hotplug irqs
   - HDMI codec support

  vmwgfx:
   - use internal vmware device headers

  ingenic:
   - demidlayering irq

  rcar-du:
   - shutdown fixes
   - convert to bridge connector helpers

  zynqmp-dsub:
   - misc fixes

  mgag200:
   - convert PLL handling to atomic

  mediatek:
   - MT8133 AAL support
   - gem mmap object support
   - MT8167 support

  etnaviv:
   - NXP Layerscape LS1028A SoC support
   - GEM mmap cleanups

  tegra:
   - new user API

  exynos:
   - missing unlock fix
   - build warning fix
   - use refcount_t"

* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
  drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
  drm/amd/display: Remove duplicate dml init
  drm/amd/display: Update bounding box states (v2)
  drm/amd/display: Update number of DCN3 clock states
  drm/amdgpu: disable GFX CGCG in aldebaran
  drm/amdgpu: Clear RAS interrupt status on aldebaran
  drm/amdgpu: Add support for RAS XGMI err query
  drm/amdkfd: Account for SH/SE count when setting up cu masks.
  drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
  drm/amdgpu: drop redundant cancel_delayed_work_sync call
  drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
  drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
  drm/amdkfd: map SVM range with correct access permission
  drm/amdkfd: check access permisson to restore retry fault
  drm/amdgpu: Update RAS XGMI Error Query
  drm/amdgpu: Add driver infrastructure for MCA RAS
  drm/amd/display: Add Logging for HDMI color depth information
  drm/amd/amdgpu: consolidate PSP TA init shared buf functions
  drm/amd/amdgpu: add name field back to ras_common_if
  drm/amdgpu: Fix build with missing pm_suspend_target_state module export
  ...

Pull driver core updates from Greg KH:
 "Here is the big set of driver core patches for 5.15-rc1.

  These do change a number of different things across different
  subsystems, and because of that, there were 2 stable tags created that
  might have already come into your tree from different pulls that did
  the following

   - changed the bus remove callback to return void

   - sysfs iomem_get_mapping rework

  Other than those two things, there's only a few small things in here:

   - kernfs performance improvements for huge numbers of sysfs users at
     once

   - tiny api cleanups

   - other minor changes

  All of these have been in linux-next for a while with no reported
  problems, other than the before-mentioned merge issue"

* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
  MAINTAINERS: Add dri-devel for component.[hc]
  driver core: platform: Remove platform_device_add_properties()
  ARM: tegra: paz00: Handle device properties with software node API
  bitmap: extend comment to bitmap_print_bitmask/list_to_buf
  drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
  topology: use bin_attribute to break the size limitation of cpumap ABI
  lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
  cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
  sysfs: Rename struct bin_attribute member to f_mapping
  sysfs: Invoke iomem_get_mapping() from the sysfs open callback
  debugfs: Return error during {full/open}_proxy_open() on rmmod
  zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
  zorro: Simplify remove callback
  sh: superhyway: Simplify check in remove callback
  nubus: Simplify check in remove callback
  nubus: Make struct nubus_driver::remove return void
  kernfs: dont call d_splice_alias() under kernfs node lock
  kernfs: use i_lock to protect concurrent inode updates
  kernfs: switch kernfs to use an rwsem
  kernfs: use VFS negative dentry caching
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char/misc driver changes for 5.15-rc1.

  Lots of different driver subsystems are being updated in here,
  notably:

   - mhi subsystem update

   - fpga subsystem update

   - coresight/hwtracing subsystem update

   - interconnect subsystem update

   - nvmem subsystem update

   - parport drivers update

   - phy subsystem update

   - soundwire subsystem update

  and there are some other char/misc drivers being updated as well:

   - binder driver additions

   - new misc drivers

   - lkdtm driver updates

   - mei driver updates

   - sram driver updates

   - other minor driver updates.

  Note, there are no habanalabs driver updates in this pull request,
  that will probably come later before -rc1 is out in a different
  request.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  Revert "bus: mhi: Add inbound buffers allocation flag"
  misc/pvpanic: fix set driver data
  VMCI: fix NULL pointer dereference when unmapping queue pair
  char: mware: fix returnvar.cocci warnings
  parport: remove non-zero check on count
  soundwire: cadence: do not extend reset delay
  soundwire: intel: conditionally exit clock stop mode on system suspend
  soundwire: intel: skip suspend/resume/wake when link was not started
  soundwire: intel: fix potential race condition during power down
  phy: qcom-qmp: Add support for SM6115 UFS phy
  dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
  phy: qmp: Provide unique clock names for DP clocks
  lkdtm: remove IDE_CORE_CP crashpoint
  lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
  coresight: Replace deprecated CPU-hotplug functions.
  Documentation: coresight: Add documentation for CoreSight config
  coresight: syscfg: Add initial configfs support
  coresight: config: Add preloaded configurations
  coresight: etm4x: Add complex configuration handlers to etmv4
  coresight: etm-perf: Update to activate selected configuration
  ...