linux-toradex.git/drivers/firmware, branch v6.0-rc1 Linux kernel for Apalis and Colibri modules Merge tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2022-08-06T22:04:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-06T22:04:48+00:00 4d1044fcb996e8de9b9ab392f4a767890e45202d Pull RISC-V updates from Palmer Dabbelt: - Enabling the FPU is now a static_key - Improvements to the Svpbmt support - CPU topology bindings for a handful of systems - Support for systems with 64-bit hart IDs - Many settings have been enabled in the defconfig, including both support for the StarFive systems and many of the Docker requirements There are also a handful of cleanups and improvements, as usual. * tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits) riscv: enable Docker requirements in defconfig riscv: convert the t-head pbmt errata to use the __nops macro riscv: introduce nops and __nops macros for NOP sequences RISC-V: Add fast call path of crash_kexec() riscv: mmap with PROT_WRITE but no PROT_READ is invalid riscv/efi_stub: Add 64bit boot-hartid support on RV64 riscv: cpu: Add 64bit hartid support on RV64 riscv: smp: Add 64bit hartid support on RV64 riscv: spinwait: Fix hartid variable type riscv: cpu_ops_sbi: Add 64bit hartid support on RV64 riscv: dts: sifive: "fix" pmic watchdog node name riscv: dts: canaan: Add k210 topology information riscv: dts: sifive: Add fu740 topology information riscv: dts: sifive: Add fu540 topology information riscv: dts: starfive: Add JH7100 CPU topology RISC-V: Add CONFIG_{NON,}PORTABLE riscv: config: enable SOC_STARFIVE in defconfig riscv: dts: microchip: Add mpfs' topology information riscv: Kconfig.socs: Add comments riscv: Kconfig.erratas: Add comments ... 
Pull RISC-V updates from Palmer Dabbelt:

 - Enabling the FPU is now a static_key

 - Improvements to the Svpbmt support

 - CPU topology bindings for a handful of systems

 - Support for systems with 64-bit hart IDs

 - Many settings have been enabled in the defconfig, including both
   support for the StarFive systems and many of the Docker requirements

There are also a handful of cleanups and improvements, as usual.

* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
  riscv: enable Docker requirements in defconfig
  riscv: convert the t-head pbmt errata to use the __nops macro
  riscv: introduce nops and __nops macros for NOP sequences
  RISC-V: Add fast call path of crash_kexec()
  riscv: mmap with PROT_WRITE but no PROT_READ is invalid
  riscv/efi_stub: Add 64bit boot-hartid support on RV64
  riscv: cpu: Add 64bit hartid support on RV64
  riscv: smp: Add 64bit hartid support on RV64
  riscv: spinwait: Fix hartid variable type
  riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
  riscv: dts: sifive: "fix" pmic watchdog node name
  riscv: dts: canaan: Add k210 topology information
  riscv: dts: sifive: Add fu740 topology information
  riscv: dts: sifive: Add fu540 topology information
  riscv: dts: starfive: Add JH7100 CPU topology
  RISC-V: Add CONFIG_{NON,}PORTABLE
  riscv: config: enable SOC_STARFIVE in defconfig
  riscv: dts: microchip: Add mpfs' topology information
  riscv: Kconfig.socs: Add comments
  riscv: Kconfig.erratas: Add comments
  ...
Merge tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 2022-08-06T17:19:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-06T17:19:51+00:00 668c3c237f5ddc2889879b08f26d2374231f3287 Pull sound updates from Takashi Iwai: "As the diffstat shows, we've had lots of developments in a wide range at this time; the majority of changes are about ASoC, including subsystem-wide cleanups, continued SOF / Intel updates and a bunch of new drivers (as usual), while there have been some significant (but almost invisible) improvements in ALSA core side, too. Below are some highlights: Core: - Faster lookups of control elements with Xarray; normal user won't notice, but on the devices with tons of control elements, it can be visibly faster - Support for input validation for controls; this will harden for badly written drivers in general with a slight overhead - Deferred async signal handling for working around the potential deadlocks - Cleanup / refactoring raw MIDI locking code ASoC: - Restructing of the set_fmt() callbacks for making things clearer in situations like CODEC to CODEC links - Clean up and modernizing the DAI naming scheme setups - Merge of more of the Intel AVS driver stack, including some board integrations - New version 4 mechanism for communication with SOF DSPs - Suppoort for dynamically selecting the PLL to use at runtime on i.MX platforms - Improvements for CODEC to CODEC support in the generic cards - Support for AMD Jadeite and various machines, AMD RPL, Intel MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments TAS2780 HD- and USB-audio: - Continued improvement for CS35L41 (sub)codec support - More quirks for various devices (HP, Lenovo, Dell, Clevo)" * tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits) ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx ALSA: line6: Replace sprintf() with sysfs_emit() ALSA: hda: Replace sprintf() with sysfs_emit() ALSA: pcm: Replace sprintf() with sysfs_emit() ALSA: core: Replace scnprintf() with sysfs_emit() ALSA: control-led: Replace sprintf() with sysfs_emit() ALSA: aoa: Replace sprintf() with sysfs_emit() ALSA: ac97: Replace sprintf() with sysfs_emit() ALSA: hda/realtek: Add quirk for Clevo NV45PZ ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7 ALSA: control: Use deferred fasync helper ALSA: pcm: Use deferred fasync helper ALSA: timer: Use deferred fasync helper ALSA: core: Add async signal helpers ASoC: q6asm: use kcalloc() instead of kzalloc() ACPI: scan: Add CLSA0101 Laptop Support ALSA: hda: cs35l41: Support CLSA0101 ALSA: hda: cs35l41: Use the CS35L41 HDA internal define ASoC: dt-bindings: use spi-peripheral-props.yaml ASoC: codecs: va-macro: use fsgen as clock ... 
Pull sound updates from Takashi Iwai:
 "As the diffstat shows, we've had lots of developments in a wide range
  at this time; the majority of changes are about ASoC, including
  subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
  new drivers (as usual), while there have been some significant (but
  almost invisible) improvements in ALSA core side, too.

  Below are some highlights:

  Core:

   - Faster lookups of control elements with Xarray; normal user won't
     notice, but on the devices with tons of control elements, it can be
     visibly faster

   - Support for input validation for controls; this will harden for
     badly written drivers in general with a slight overhead

   - Deferred async signal handling for working around the potential
     deadlocks

   - Cleanup / refactoring raw MIDI locking code

  ASoC:

   - Restructing of the set_fmt() callbacks for making things clearer in
     situations like CODEC to CODEC links

   - Clean up and modernizing the DAI naming scheme setups

   - Merge of more of the Intel AVS driver stack, including some board
     integrations

   - New version 4 mechanism for communication with SOF DSPs

   - Suppoort for dynamically selecting the PLL to use at runtime on
     i.MX platforms

   - Improvements for CODEC to CODEC support in the generic cards

   - Support for AMD Jadeite and various machines, AMD RPL, Intel
     MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
     MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
     WAS883x, and Texas Instruments TAS2780

  HD- and USB-audio:

   - Continued improvement for CS35L41 (sub)codec support

   - More quirks for various devices (HP, Lenovo, Dell, Clevo)"

* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
  ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
  ALSA: line6: Replace sprintf() with sysfs_emit()
  ALSA: hda: Replace sprintf() with sysfs_emit()
  ALSA: pcm: Replace sprintf() with sysfs_emit()
  ALSA: core: Replace scnprintf() with sysfs_emit()
  ALSA: control-led: Replace sprintf() with sysfs_emit()
  ALSA: aoa: Replace sprintf() with sysfs_emit()
  ALSA: ac97: Replace sprintf() with sysfs_emit()
  ALSA: hda/realtek: Add quirk for Clevo NV45PZ
  ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
  ALSA: control: Use deferred fasync helper
  ALSA: pcm: Use deferred fasync helper
  ALSA: timer: Use deferred fasync helper
  ALSA: core: Add async signal helpers
  ASoC: q6asm: use kcalloc() instead of kzalloc()
  ACPI: scan: Add CLSA0101 Laptop Support
  ALSA: hda: cs35l41: Support CLSA0101
  ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
  ASoC: dt-bindings: use spi-peripheral-props.yaml
  ASoC: codecs: va-macro: use fsgen as clock
  ...
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2022-08-04T18:05:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-04T18:05:48+00:00 228dfe98a313f6b6bff5da8b2c5e650e297ebf1a Pull char / misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem changes for 6.0-rc1. Highlights include: - large set of IIO driver updates, additions, and cleanups - new habanalabs device support added (loads of register maps much like GPUs have) - soundwire driver updates - phy driver updates - slimbus driver updates - tiny virt driver fixes and updates - misc driver fixes and updates - interconnect driver updates - hwtracing driver updates - fpga driver updates - extcon driver updates - firmware driver updates - counter driver update - mhi driver fixes and updates - binder driver fixes and updates - speakup driver fixes All of these have been in linux-next for a while without any reported problems" * tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits) drivers: lkdtm: fix clang -Wformat warning char: remove VR41XX related char driver misc: Mark MICROCODE_MINOR unused spmi: trace: fix stack-out-of-bound access in SPMI tracing functions dt-bindings: iio: adc: Add compatible for MT8188 iio: light: isl29028: Fix the warning in isl29028_remove() iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: adc: max1027: unlock on error path in max1027_read_single_value() iio: proximity: sx9324: add empty line in front of bullet list iio: magnetometer: hmc5843: Remove duplicate 'the' iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() ... 
Pull char / misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  changes for 6.0-rc1.

  Highlights include:

   - large set of IIO driver updates, additions, and cleanups

   - new habanalabs device support added (loads of register maps much
     like GPUs have)

   - soundwire driver updates

   - phy driver updates

   - slimbus driver updates

   - tiny virt driver fixes and updates

   - misc driver fixes and updates

   - interconnect driver updates

   - hwtracing driver updates

   - fpga driver updates

   - extcon driver updates

   - firmware driver updates

   - counter driver update

   - mhi driver fixes and updates

   - binder driver fixes and updates

   - speakup driver fixes

  All of these have been in linux-next for a while without any reported
  problems"

* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
  drivers: lkdtm: fix clang -Wformat warning
  char: remove VR41XX related char driver
  misc: Mark MICROCODE_MINOR unused
  spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
  dt-bindings: iio: adc: Add compatible for MT8188
  iio: light: isl29028: Fix the warning in isl29028_remove()
  iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  iio: adc: max1027: unlock on error path in max1027_read_single_value()
  iio: proximity: sx9324: add empty line in front of bullet list
  iio: magnetometer: hmc5843: Remove duplicate 'the'
  iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  ...
Merge tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi 2022-08-03T21:41:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-03T21:41:36+00:00 ab17c0cd376f240bb8ead6f03be2bb4748bbc61a Pull efivars sysfs interface removal from Ard Biesheuvel: "Remove the obsolete 'efivars' sysfs based interface to the EFI variable store, now that all users have moved to the efivarfs pseudo file system, which was created ~10 years ago to address some fundamental shortcomings in the sysfs based driver. Move the 'business logic' related to which EFI variables are important and may affect the boot flow from the efivars support layer into the efivarfs pseudo file system, so it is no longer exposed to other parts of the kernel" * tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: vars: Move efivar caching layer into efivarfs efi: vars: Switch to new wrapper layer efi: vars: Remove deprecated 'efivars' sysfs interface 
Pull efivars sysfs interface removal from Ard Biesheuvel:
 "Remove the obsolete 'efivars' sysfs based interface to the EFI
  variable store, now that all users have moved to the efivarfs pseudo
  file system, which was created ~10 years ago to address some
  fundamental shortcomings in the sysfs based driver.

  Move the 'business logic' related to which EFI variables are important
  and may affect the boot flow from the efivars support layer into the
  efivarfs pseudo file system, so it is no longer exposed to other parts
  of the kernel"

* tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: vars: Move efivar caching layer into efivarfs
  efi: vars: Switch to new wrapper layer
  efi: vars: Remove deprecated 'efivars' sysfs interface
Merge tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi 2022-08-03T21:38:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-03T21:38:02+00:00 97a77ab14ffac749ec2419c92ec2954111c22d22 Pull EFI updates from Ard Biesheuvel: - Enable mirrored memory for arm64 - Fix up several abuses of the efivar API - Refactor the efivar API in preparation for moving the 'business logic' part of it into efivarfs - Enable ACPI PRM on arm64 * tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) ACPI: Move PRM config option under the main ACPI config ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64 ACPI: PRM: Change handler_addr type to void pointer efi: Simplify arch_efi_call_virt() macro drivers: fix typo in firmware/efi/memmap.c efi: vars: Drop __efivar_entry_iter() helper which is no longer used efi: vars: Use locking version to iterate over efivars linked lists efi: pstore: Omit efivars caching EFI varstore access layer efi: vars: Add thin wrapper around EFI get/set variable interface efi: vars: Don't drop lock in the middle of efivar_init() pstore: Add priv field to pstore_record for backend specific use Input: applespi - avoid efivars API and invoke EFI services directly selftests/kexec: remove broken EFI_VARS secure boot fallback check brcmfmac: Switch to appropriate helper to load EFI variable contents iwlwifi: Switch to proper EFI variable store interface media: atomisp_gmin_platform: stop abusing efivar API efi: efibc: avoid efivar API for setting variables efi: avoid efivars layer when loading SSDTs from variables efi: Correct comment on efi_memmap_alloc memblock: Disable mirror feature if kernelcore is not specified ... 
Pull EFI updates from Ard Biesheuvel:

 - Enable mirrored memory for arm64

 - Fix up several abuses of the efivar API

 - Refactor the efivar API in preparation for moving the 'business
   logic' part of it into efivarfs

 - Enable ACPI PRM on arm64

* tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
  ACPI: Move PRM config option under the main ACPI config
  ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64
  ACPI: PRM: Change handler_addr type to void pointer
  efi: Simplify arch_efi_call_virt() macro
  drivers: fix typo in firmware/efi/memmap.c
  efi: vars: Drop __efivar_entry_iter() helper which is no longer used
  efi: vars: Use locking version to iterate over efivars linked lists
  efi: pstore: Omit efivars caching EFI varstore access layer
  efi: vars: Add thin wrapper around EFI get/set variable interface
  efi: vars: Don't drop lock in the middle of efivar_init()
  pstore: Add priv field to pstore_record for backend specific use
  Input: applespi - avoid efivars API and invoke EFI services directly
  selftests/kexec: remove broken EFI_VARS secure boot fallback check
  brcmfmac: Switch to appropriate helper to load EFI variable contents
  iwlwifi: Switch to proper EFI variable store interface
  media: atomisp_gmin_platform: stop abusing efivar API
  efi: efibc: avoid efivar API for setting variables
  efi: avoid efivars layer when loading SSDTs from variables
  efi: Correct comment on efi_memmap_alloc
  memblock: Disable mirror feature if kernelcore is not specified
  ...
Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2022-08-02T18:17:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-02T18:17:00+00:00 a771ea6413c00cf4af0570745f2e27084d7e2376 Pull power management updates from Rafael Wysocki: "These are mostly minor improvements all over including new CPU IDs for the Intel RAPL driver, an Energy Model rework to use micro-Watt as the power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq updates, documentation cleanups and a new version of the pm-graph suite of utilities. Specifics: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused function parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello)" * tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P PM: QoS: Add check to make sure CPU freq is non-negative PM: hibernate: defer device probing when resuming from hibernation intel_idle: make SPR C1 and C1E be independent cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar pm-graph v5.9 cpufreq: Warn users while freeing active policy cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM: domains: Ensure genpd_debugfs_dir exists before remove PM: runtime: Extend support for wakeirq for force_suspend|resume ... 
Pull power management updates from Rafael Wysocki:
 "These are mostly minor improvements all over including new CPU IDs for
  the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
  power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
  updates, documentation cleanups and a new version of the pm-graph
  suite of utilities.

  Specifics:

   - Make cpufreq_show_cpus() more straightforward (Viresh Kumar).

   - Drop unnecessary CPU hotplug locking from store() used by cpufreq
     sysfs attributes (Viresh Kumar).

   - Make the ACPI cpufreq driver support the boost control interface on
     Zhaoxin/Centaur processors (Tony W Wang-oc).

   - Print a warning message on attempts to free an active cpufreq
     policy which should never happen (Viresh Kumar).

   - Fix grammar in the Kconfig help text for the loongson2 cpufreq
     driver (Randy Dunlap).

   - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
     governor (Zhao Liu).

   - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
     cpuidle driver (Eiichi Tsukata).

   - Modify intel_idle to treat C1 and C1E as independent idle states on
     Sapphire Rapids (Artem Bityutskiy).

   - Extend support for wakeirq to callback wrappers used during system
     suspend and resume (Ulf Hansson).

   - Defer waiting for device probe before loading a hibernation image
     till the first actual device access to avoid possible deadlocks
     reported by syzbot (Tetsuo Handa).

   - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
     Helgaas).

   - Add Raptor Lake-P to the list of processors supported by the Intel
     RAPL driver (George D Sworo).

   - Add Alder Lake-N and Raptor Lake-P to the list of processors for
     which Power Limit4 is supported in the Intel RAPL driver (Sumeet
     Pawnikar).

   - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
     attempting to remove it (Hsin-Yi Wang).

   - Change the Energy Model code to represent power in micro-Watts and
     adjust its users accordingly (Lukasz Luba).

   - Add new devfreq driver for Mediatek CCI (Cache Coherent
     Interconnect) (Johnson Wang).

   - Convert the Samsung Exynos SoC Bus bindings to DT schema of
     exynos-bus.c (Krzysztof Kozlowski).

   - Address kernel-doc warnings by adding the description for unused
     function parameters in devfreq core (Mauro Carvalho Chehab).

   - Use NULL to pass a null pointer rather than zero according to the
     function propotype in imx-bus.c (Colin Ian King).

   - Print error message instead of error interger value in
     tegra30-devfreq.c (Dmitry Osipenko).

   - Add checks to prevent setting negative frequency QoS limits for
     CPUs (Shivnandan Kumar).

   - Update the pm-graph suite of utilities to the latest revision 5.9
     including multiple improvements (Todd Brandt).

   - Drop pme_interrupt reference from the PCI power management
     documentation (Mario Limonciello)"

* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  PM: QoS: Add check to make sure CPU freq is non-negative
  PM: hibernate: defer device probing when resuming from hibernation
  intel_idle: make SPR C1 and C1E be independent
  cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
  cpufreq: loongson2: fix Kconfig "its" grammar
  pm-graph v5.9
  cpufreq: Warn users while freeing active policy
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers
  PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
  PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
  PM / devfreq: shut up kernel-doc warnings
  dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
  PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
  dt-bindings: interconnect: Add MediaTek CCI dt-bindings
  PM: domains: Ensure genpd_debugfs_dir exists before remove
  PM: runtime: Extend support for wakeirq for force_suspend|resume
  ...
Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2022-08-02T15:10:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-02T15:10:10+00:00 47b62edcd4eb70ccf4ecfacaf1a960eecfd3f891 Pull ARM SoC drivers from Arnd Bergmann: "The SoC driver updates contain changes to improve support for additional SoC variants, as well as cleanups an minor bugfixes in a number of existing drivers. Notable updates this time include: - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers - Updates for interconnect drivers on Qualcomm Snapdragon - A new driver support for NMI interrupts on Fujitsu A64fx - A rework of Broadcom BCMBCA Kconfig dependencies - Improved support for BCM2711 (Raspberry Pi 4) power management to allow the use of the V3D GPU - Cleanups to the NXP guts driver - Arm SCMI firmware driver updates to add tracing support, and use the firmware interfaces for system power control and for power capping" * tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits) soc: a64fx-diag: disable modular build dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config ARM: mach-qcom: Add support for MSM8909 dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method soc: qcom: spm: Add CPU data for MSM8909 dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible soc: qcom: rpmpd: Add compatible for MSM8909 dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains soc: qcom: smd-rpm: Add compatible for MSM8909 dt-bindings: soc: qcom: smd-rpm: Add MSM8909 soc: qcom: icc-bwmon: Remove unnecessary print function dev_err() soc: fujitsu: Add A64FX diagnostic interrupt driver soc: qcom: socinfo: Fix the id of SA8540P SoC soc: qcom: Make QCOM_RPMPD depend on PM tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ... 
Pull ARM SoC drivers from Arnd Bergmann:
 "The SoC driver updates contain changes to improve support for
  additional SoC variants, as well as cleanups an minor bugfixes
  in a number of existing drivers.

  Notable updates this time include:

   - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers

   - Updates for interconnect drivers on Qualcomm Snapdragon

   - A new driver support for NMI interrupts on Fujitsu A64fx

   - A rework of Broadcom BCMBCA Kconfig dependencies

   - Improved support for BCM2711 (Raspberry Pi 4) power management to
     allow the use of the V3D GPU

   - Cleanups to the NXP guts driver

   - Arm SCMI firmware driver updates to add tracing support, and use
     the firmware interfaces for system power control and for power
     capping"

* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
  soc: a64fx-diag: disable modular build
  dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
  dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
  dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
  ARM: mach-qcom: Add support for MSM8909
  dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
  soc: qcom: spm: Add CPU data for MSM8909
  dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
  soc: qcom: rpmpd: Add compatible for MSM8909
  dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
  soc: qcom: smd-rpm: Add compatible for MSM8909
  dt-bindings: soc: qcom: smd-rpm: Add MSM8909
  soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
  soc: fujitsu: Add A64FX diagnostic interrupt driver
  soc: qcom: socinfo: Fix the id of SA8540P SoC
  soc: qcom: Make QCOM_RPMPD depend on PM
  tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  ...
Merge tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2022-08-02T15:02:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-02T15:02:59+00:00 e233cc59d08f9bd389d4e8eaf71063150110b9b9 Pull ARM SoC updates from Arnd Bergmann: "The updates for arch/arm/mach-* platform code this time are mainly minor cleanups. Most notably, the DaVinci DM644x/DM646x SoC support gets removed. This was also scheduled for later removal early next year, but Linus Walleij asked for having them removed earlier to avoid problems for the GPIO subsystem" * tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: at91: setup outer cache .write_sec() callback if needed ARM: at91: add sam_linux_is_optee_available() function ARM: Marvell: Update PCIe fixup ARM: bcmbca: Include full family name in Kconfig ARM: bcm: NSP: Removed forced thermal selection ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA arm: bcmbca: Add BCMBCA sub platforms arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA MAINTAINERS: Move BCM63138 to bcmbca arch entry ARM: shmobile: rcar-gen2: Increase refcount for new reference ARM: davinci: Delete DM646x board files ARM: davinci: Delete DM644x board files firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call cpufreq: zynq: Fix refcount leak in zynq_get_revision ARM: OMAP2+: Kconfig: Fix indentation ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init ARM: OMAP2+: pdata-quirks: Fix refcount leak bug ARM: OMAP2+: display: Fix refcount leak bug ARM: OMAP2+: Fix refcount leak in omapdss_init_of ARM: imx25: support silicon revision 1.2 ... 
Pull ARM SoC updates from Arnd Bergmann:
 "The updates for arch/arm/mach-* platform code this time are mainly
  minor cleanups.

  Most notably, the DaVinci DM644x/DM646x SoC support gets removed. This
  was also scheduled for later removal early next year, but Linus
  Walleij asked for having them removed earlier to avoid problems for
  the GPIO subsystem"

* tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  ARM: at91: setup outer cache .write_sec() callback if needed
  ARM: at91: add sam_linux_is_optee_available() function
  ARM: Marvell: Update PCIe fixup
  ARM: bcmbca: Include full family name in Kconfig
  ARM: bcm: NSP: Removed forced thermal selection
  ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  arm: bcmbca: Add BCMBCA sub platforms
  arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA
  MAINTAINERS: Move BCM63138 to bcmbca arch entry
  ARM: shmobile: rcar-gen2: Increase refcount for new reference
  ARM: davinci: Delete DM646x board files
  ARM: davinci: Delete DM644x board files
  firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call
  cpufreq: zynq: Fix refcount leak in zynq_get_revision
  ARM: OMAP2+: Kconfig: Fix indentation
  ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
  ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
  ARM: OMAP2+: display: Fix refcount leak bug
  ARM: OMAP2+: Fix refcount leak in omapdss_init_of
  ARM: imx25: support silicon revision 1.2
  ...
Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em' 2022-07-29T17:33:13+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2022-07-29T17:33:13+00:00 954a83fc60c805f138db26747645710f243a9939 Merge core device power management changes for v5.20-rc1: - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). * pm-core: PM: runtime: Extend support for wakeirq for force_suspend|resume * pm-sleep: PM: hibernate: defer device probing when resuming from hibernation PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP * powercap: powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P powercap: intel_rapl: Add support for RAPTORLAKE_P * pm-domains: PM: domains: Ensure genpd_debugfs_dir exists before remove * pm-em: cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers 
Merge core device power management changes for v5.20-rc1:

 - Extend support for wakeirq to callback wrappers used during system
   suspend and resume (Ulf Hansson).

 - Defer waiting for device probe before loading a hibernation image
   till the first actual device access to avoid possible deadlocks
   reported by syzbot (Tetsuo Handa).

 - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
   Helgaas).

 - Add Raptor Lake-P to the list of processors supported by the Intel
   RAPL driver (George D Sworo).

 - Add Alder Lake-N and Raptor Lake-P to the list of processors for
   which Power Limit4 is supported in the Intel RAPL driver (Sumeet
   Pawnikar).

 - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
   attempting to remove it (Hsin-Yi Wang).

 - Change the Energy Model code to represent power in micro-Watts and
   adjust its users accordingly (Lukasz Luba).

* pm-core:
  PM: runtime: Extend support for wakeirq for force_suspend|resume

* pm-sleep:
  PM: hibernate: defer device probing when resuming from hibernation
  PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP

* powercap:
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  powercap: intel_rapl: Add support for RAPTORLAKE_P

* pm-domains:
  PM: domains: Ensure genpd_debugfs_dir exists before remove

* pm-em:
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers
firmware: cs_dsp: Add memory chunk helpers 2022-07-22T12:40:00+00:00 Charles Keepax ckeepax@opensource.cirrus.com 2022-07-22T09:48:51+00:00 a4b976552f122ea851f556769874022cf097741e Add helpers that can be layered on top of a buffer read from or to be written to the DSP to faciliate accessing datastructures within the DSP memory. These functions handle adding the padding bytes for the DSP, converting to big endian, and packing arbitrary length data. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220722094851.92521-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> 
Add helpers that can be layered on top of a buffer read from or to be
written to the DSP to faciliate accessing datastructures within the DSP
memory. These functions handle adding the padding bytes for the DSP,
converting to big endian, and packing arbitrary length data.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220722094851.92521-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>