linux-toradex.git/drivers/firmware, branch v6.16-rc6 Linux kernel for Apalis and Colibri modules Merge tag 'efi-fixes-for-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi 2025-07-08T01:22:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-08T01:22:25+00:00 eadb9fa7f775e39c2bdd9a43a947f03e86f9e37b Pull EFI fixes from Ard Biesheuvel: - Drop preprocessor macros in zboot.lds which is not preprocessed - Fix zboot .data section size and raw size when SBAT is enabled * tag 'efi-fixes-for-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Fix .data section size calculations when .sbat is present efi: Drop preprocessor directives from zboot.lds 
Pull EFI fixes from Ard Biesheuvel:

 - Drop preprocessor macros in zboot.lds which is not preprocessed

 - Fix zboot .data section size and raw size when SBAT is enabled

* tag 'efi-fixes-for-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Fix .data section size calculations when .sbat is present
  efi: Drop preprocessor directives from zboot.lds
Merge tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes 2025-07-03T14:23:53+00:00 Arnd Bergmann arnd@arndb.de 2025-07-03T14:23:53+00:00 f31824a60213dd12bddd5b7c2e7e8adbeda61929 Samsung SoC fixes for v6.16 1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC SNPS EUSB2 phy driver, because Kconfig entry was renamed when changing the driver to a common one, shared with Samsung SoC, thus defconfig lost that driver effectively. 2. Exynos ACPM: Fix timeouts happening with multiple requests. * tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: firmware: exynos-acpm: fix timeouts on xfers handling arm64: defconfig: update renamed PHY_SNPS_EUSB2 
Samsung SoC fixes for v6.16

1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
   SNPS EUSB2 phy driver, because Kconfig entry was renamed when
   changing the driver to a common one, shared with Samsung SoC, thus
   defconfig lost that driver effectively.

2. Exynos ACPM: Fix timeouts happening with multiple requests.

* tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  firmware: exynos-acpm: fix timeouts on xfers handling
  arm64: defconfig: update renamed PHY_SNPS_EUSB2
efi: Fix .data section size calculations when .sbat is present 2025-06-20T11:36:14+00:00 Vitaly Kuznetsov vkuznets@redhat.com 2025-06-20T11:16:07+00:00 f8b53cc9174c5980549f60c972faad82b660b62d Commit 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section") neglected to adjust the sizes of the .data section when CONFIG_EFI_SBAT_FILE is set. As the result, the produced PE binary is incorrect and some tools complain about it. E.g. 'sbsign' reports: # sbsign --key my.key --cert my.crt arch/arm64/boot/vmlinuz.efi warning: file-aligned section .data extends beyond end of file warning: checksum areas are greater than image size. Invalid section table? Note, '__data_size' is also used in the PE optional header and it is not entirely clear whether .sbat needs to be accounted as part of SizeOfInitializedData or not. As the header seems to be unused by the real world firmware, keeping the field equal to __data_size. Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> 
Commit 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT
section") neglected to adjust the sizes of the .data section when
CONFIG_EFI_SBAT_FILE is set. As the result, the produced PE binary is
incorrect and some tools complain about it. E.g. 'sbsign' reports:

 # sbsign --key my.key --cert my.crt arch/arm64/boot/vmlinuz.efi
 warning: file-aligned section .data extends beyond end of file
 warning: checksum areas are greater than image size. Invalid section table?

Note, '__data_size' is also used in the PE optional header and it is not
entirely clear whether .sbat needs to be accounted as part of
SizeOfInitializedData or not. As the header seems to be unused by the real
world firmware, keeping the field equal to __data_size.

Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi: Drop preprocessor directives from zboot.lds 2025-06-10T16:47:55+00:00 Vitaly Kuznetsov vkuznets@redhat.com 2025-06-06T15:41:12+00:00 c33453d08a56a45c2e72f9f56043610b8f7449c7 Older versions of `ld` don't seem to support preprocessor directives in linker scripts, e.g. on RHEL9's ld-2.35.2-63.el9 the build fails with: ld:./drivers/firmware/efi/libstub/zboot.lds:32: ignoring invalid character `#' in expression ld:./drivers/firmware/efi/libstub/zboot.lds:33: syntax error We don't seem to need these '#ifdef', no empty .sbat section is created when CONFIG_EFI_SBAT_FILE="": # objdump -h arch/arm64/boot/vmlinuz.efi arch/arm64/boot/vmlinuz.efi: file format pei-aarch64-little Sections: Idx Name Size VMA LMA File off Algn 0 .text 00b94000 0000000000001000 0000000000001000 00001000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .data 00000200 0000000000b95000 0000000000b95000 00b95000 2**2 CONTENTS, ALLOC, LOAD, DATA Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> 
Older versions of `ld` don't seem to support preprocessor directives in
linker scripts, e.g. on RHEL9's ld-2.35.2-63.el9 the build fails with:

 ld:./drivers/firmware/efi/libstub/zboot.lds:32: ignoring invalid character `#' in expression
 ld:./drivers/firmware/efi/libstub/zboot.lds:33: syntax error

We don't seem to need these '#ifdef', no empty .sbat section is created
when CONFIG_EFI_SBAT_FILE="":

 # objdump -h arch/arm64/boot/vmlinuz.efi

 arch/arm64/boot/vmlinuz.efi:     file format pei-aarch64-little

 Sections:
 Idx Name          Size      VMA               LMA               File off  Algn
   0 .text         00b94000  0000000000001000  0000000000001000  00001000  2**2
                   CONTENTS, ALLOC, LOAD, READONLY, CODE
   1 .data         00000200  0000000000b95000  0000000000b95000  00b95000  2**2
                   CONTENTS, ALLOC, LOAD, DATA

Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
firmware: exynos-acpm: fix timeouts on xfers handling 2025-06-10T08:20:16+00:00 Tudor Ambarus tudor.ambarus@linaro.org 2025-06-06T10:45:37+00:00 8d2c2fa2209e83d0eb10f7330d8a0bbdc1df32ff The mailbox framework has a single inflight request at a time. If a request is sent while another is still active, it will be queued to the mailbox core ring buffer. ACPM protocol did not serialize the calls to the mailbox subsystem so we could start the timeout ticks in parallel for multiple requests, while just one was being inflight. Consider a hypothetical case where the xfer timeout is 100ms and an ACPM transaction takes 90ms: | 0ms: Message #0 is queued in mailbox layer and sent out, then sits | at acpm_dequeue_by_polling() with a timeout of 100ms | 1ms: Message #1 is queued in mailbox layer but not sent out yet. | Since send_message() doesn't block, it also sits at | acpm_dequeue_by_polling() with a timeout of 100ms | ... | 90ms: Message #0 is completed, txdone is called and message #1 is sent | 101ms: Message #1 times out since the count started at 1ms. Even though | it has only been inflight for 11ms. Fix the problem by moving mbox_send_message() and mbox_client_txdone() immediately after the message has been written to the TX queue and while still keeping the ACPM TX queue lock. We thus tie together the TX write with the doorbell ring and mark the TX as done after the doorbell has been rung. This guarantees that the doorbell has been rang before starting the timeout ticks. We should also see some performance improvement as we no longer wait to receive a response before ringing the doorbell for the next request, so the ACPM firmware shall be able to drain faster the TX queue. Another benefit is that requests are no longer able to ring the doorbell one for the other, so it eases debugging. Finally, the mailbox software queue will always contain a single doorbell request due to the serialization done at the ACPM TX queue level. Protocols like ACPM, that handle their own hardware queues need a passthrough mailbox API, where they are able to just ring the doorbell or flip a bit directly into the mailbox controller. The mailbox software queue mechanism, the locking done into the mailbox core is not really needed, so hopefully this lays the foundation for a passthrough mailbox API. Reported-by: André Draszik <andre.draszik@linaro.org> Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20250606-acpm-timeout-v2-1-306b1aa07a6c@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 
The mailbox framework has a single inflight request at a time. If
a request is sent while another is still active, it will be queued
to the mailbox core ring buffer.

ACPM protocol did not serialize the calls to the mailbox subsystem so we
could start the timeout ticks in parallel for multiple requests, while
just one was being inflight.

Consider a hypothetical case where the xfer timeout is 100ms and an ACPM
transaction takes 90ms:
      | 0ms: Message #0 is queued in mailbox layer and sent out, then sits
      |      at acpm_dequeue_by_polling() with a timeout of 100ms
      | 1ms: Message #1 is queued in mailbox layer but not sent out yet.
      |      Since send_message() doesn't block, it also sits at
      |      acpm_dequeue_by_polling() with a timeout of 100ms
      |  ...
      | 90ms: Message #0 is completed, txdone is called and message #1 is sent
      | 101ms: Message #1 times out since the count started at 1ms. Even though
      |       it has only been inflight for 11ms.

Fix the problem by moving mbox_send_message() and mbox_client_txdone()
immediately after the message has been written to the TX queue and while
still keeping the ACPM TX queue lock. We thus tie together the TX write
with the doorbell ring and mark the TX as done after the doorbell has
been rung. This guarantees that the doorbell has been rang before
starting the timeout ticks. We should also see some performance
improvement as we no longer wait to receive a response before ringing
the doorbell for the next request, so the ACPM firmware shall be able to
drain faster the TX queue. Another benefit is that requests are no
longer able to ring the doorbell one for the other, so it eases
debugging. Finally, the mailbox software queue will always contain a
single doorbell request due to the serialization done at the ACPM TX
queue level. Protocols like ACPM, that handle their own hardware queues
need a passthrough mailbox API, where they are able to just ring the
doorbell or flip a bit directly into the mailbox controller. The mailbox
software queue mechanism, the locking done into the mailbox core is not
really needed, so hopefully this lays the foundation for a passthrough
mailbox API.

Reported-by: André Draszik <andre.draszik@linaro.org>
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250606-acpm-timeout-v2-1-306b1aa07a6c@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context 2025-06-09T10:24:43+00:00 Sudeep Holla sudeep.holla@arm.com 2025-05-28T08:49:43+00:00 9ca7a421229bbdfbe2e1e628cff5cfa782720a10 The current use of a mutex to protect the notifier hashtable accesses can lead to issues in the atomic context. It results in the below kernel warnings: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4 | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | handle_notif_callbacks+0x54/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 To address this, replace the mutex with an rwlock to protect the notifier hashtable accesses. This ensures that read-side locking does not sleep and multiple readers can acquire the lock concurrently, avoiding unnecessary contention and potential deadlocks. Writer access remains exclusive, preserving correctness. This change resolves warnings from lockdep about potential sleep in atomic context. Cc: Jens Wiklander <jens.wiklander@linaro.org> Reported-by: Jérôme Forissier <jerome.forissier@linaro.org> Closes: https://github.com/OP-TEE/optee_os/issues/7394 Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <20250528-ffa_notif_fix-v1-3-5ed7bc7f8437@arm.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Tested-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
The current use of a mutex to protect the notifier hashtable accesses
can lead to issues in the atomic context. It results in the below
kernel warnings:

  |  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258
  |  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0
  |  preempt_count: 1, expected: 0
  |  RCU nest depth: 0, expected: 0
  |  CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4
  |  Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn
  |  Call trace:
  |   show_stack+0x18/0x24 (C)
  |   dump_stack_lvl+0x78/0x90
  |   dump_stack+0x18/0x24
  |   __might_resched+0x114/0x170
  |   __might_sleep+0x48/0x98
  |   mutex_lock+0x24/0x80
  |   handle_notif_callbacks+0x54/0xe0
  |   notif_get_and_handle+0x40/0x88
  |   generic_exec_single+0x80/0xc0
  |   smp_call_function_single+0xfc/0x1a0
  |   notif_pcpu_irq_work_fn+0x2c/0x38
  |   process_one_work+0x14c/0x2b4
  |   worker_thread+0x2e4/0x3e0
  |   kthread+0x13c/0x210
  |   ret_from_fork+0x10/0x20

To address this, replace the mutex with an rwlock to protect the notifier
hashtable accesses. This ensures that read-side locking does not sleep and
multiple readers can acquire the lock concurrently, avoiding unnecessary
contention and potential deadlocks. Writer access remains exclusive,
preserving correctness.

This change resolves warnings from lockdep about potential sleep in
atomic context.

Cc: Jens Wiklander <jens.wiklander@linaro.org>
Reported-by: Jérôme Forissier <jerome.forissier@linaro.org>
Closes: https://github.com/OP-TEE/optee_os/issues/7394
Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-3-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_ffa: Move memory allocation outside the mutex locking 2025-06-09T10:24:43+00:00 Sudeep Holla sudeep.holla@arm.com 2025-05-28T08:49:42+00:00 27e850c88df0e25474a8caeb2903e2e90b62c1dc The notifier callback node allocation is currently done while holding the notify_lock mutex. While this is safe even if memory allocation may sleep, we need to move the allocation outside the locked region in preparation to move from using muxtes to rwlocks. Move the memory allocation to avoid potential sleeping in atomic context once the locks are moved from mutex to rwlocks. Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <20250528-ffa_notif_fix-v1-2-5ed7bc7f8437@arm.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
The notifier callback node allocation is currently done while holding
the notify_lock mutex. While this is safe even if memory allocation may
sleep, we need to move the allocation outside the locked region in
preparation to move from using muxtes to rwlocks.

Move the memory allocation to avoid potential sleeping in atomic context
once the locks are moved from mutex to rwlocks.

Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-2-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_ffa: Fix memory leak by freeing notifier callback node 2025-06-09T10:24:43+00:00 Sudeep Holla sudeep.holla@arm.com 2025-05-28T08:49:41+00:00 a833d31ad867103ba72a0b73f3606f4ab8601719 Commit e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") adds support for notifier callbacks by allocating and inserting a callback node into a hashtable during registration of notifiers. However, during unregistration, the code only removes the node from the hashtable without freeing the associated memory, resulting in a memory leak. Resolve the memory leak issue by ensuring the allocated notifier callback node is properly freed after it is removed from the hashtable entry. Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <20250528-ffa_notif_fix-v1-1-5ed7bc7f8437@arm.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
Commit e0573444edbf ("firmware: arm_ffa: Add interfaces to request
notification callbacks") adds support for notifier callbacks by allocating
and inserting a callback node into a hashtable during registration of
notifiers. However, during unregistration, the code only removes the
node from the hashtable without freeing the associated memory, resulting
in a memory leak.

Resolve the memory leak issue by ensuring the allocated notifier callback
node is properly freed after it is removed from the hashtable entry.

Fixes: e0573444edbf ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-1-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2025-06-07T17:05:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-07T17:05:35+00:00 8630c59e99363c4b655788fd01134aef9bcd9264 Pull Kbuild updates from Masahiro Yamada: - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a symbol only to specified modules - Improve ABI handling in gendwarfksyms - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n - Add checkers for redundant or missing <linux/export.h> inclusion - Deprecate the extra-y syntax - Fix a genksyms bug when including enum constants from *.symref files * tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) genksyms: Fix enum consts from a reference affecting new values arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES} efi/libstub: use 'targets' instead of extra-y in Makefile module: make __mod_device_table__* symbols static scripts/misc-check: check unnecessary #include <linux/export.h> when W=1 scripts/misc-check: check missing #include <linux/export.h> when W=1 scripts/misc-check: add double-quotes to satisfy shellcheck kbuild: move W=1 check for scripts/misc-check to top-level Makefile scripts/tags.sh: allow to use alternative ctags implementation kconfig: introduce menu type enum docs: symbol-namespaces: fix reST warning with literal block kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION docs/core-api/symbol-namespaces: drop table of contents and section numbering modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time kbuild: move kbuild syntax processing to scripts/Makefile.build Makefile: remove dependency on archscripts for header installation Documentation/kbuild: Add new gendwarfksyms kABI rules Documentation/kbuild: Drop section numbers ... 
Pull Kbuild updates from Masahiro Yamada:

 - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
   exports a symbol only to specified modules

 - Improve ABI handling in gendwarfksyms

 - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n

 - Add checkers for redundant or missing <linux/export.h> inclusion

 - Deprecate the extra-y syntax

 - Fix a genksyms bug when including enum constants from *.symref files

* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
  genksyms: Fix enum consts from a reference affecting new values
  arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
  kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
  efi/libstub: use 'targets' instead of extra-y in Makefile
  module: make __mod_device_table__* symbols static
  scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
  scripts/misc-check: check missing #include <linux/export.h> when W=1
  scripts/misc-check: add double-quotes to satisfy shellcheck
  kbuild: move W=1 check for scripts/misc-check to top-level Makefile
  scripts/tags.sh: allow to use alternative ctags implementation
  kconfig: introduce menu type enum
  docs: symbol-namespaces: fix reST warning with literal block
  kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
  tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
  docs/core-api/symbol-namespaces: drop table of contents and section numbering
  modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
  kbuild: move kbuild syntax processing to scripts/Makefile.build
  Makefile: remove dependency on archscripts for header installation
  Documentation/kbuild: Add new gendwarfksyms kABI rules
  Documentation/kbuild: Drop section numbers
  ...
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson 2025-06-07T16:56:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-07T16:56:18+00:00 b7191581a973ab2fca45d2ca64416065f1660ae0 Pull LoongArch updates from Huacai Chen: - Adjust the 'make install' operation - Support SCHED_MC (Multi-core scheduler) - Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS - Enable HAVE_ARCH_STACKLEAK - Increase max supported CPUs up to 2048 - Introduce the numa_memblks conversion - Add PWM controller nodes in dts - Some bug fixes and other small changes * tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: platform/loongarch: laptop: Unregister generic_sub_drivers on exit platform/loongarch: laptop: Add backlight power control support platform/loongarch: laptop: Get brightness setting from EC on probe LoongArch: dts: Add PWM support to Loongson-2K2000 LoongArch: dts: Add PWM support to Loongson-2K1000 LoongArch: dts: Add PWM support to Loongson-2K0500 LoongArch: vDSO: Correctly use asm parameters in syscall wrappers LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset() LoongArch: Preserve firmware configuration when desired LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg LoongArch: Introduce the numa_memblks conversion LoongArch: Increase max supported CPUs up to 2048 LoongArch: Enable HAVE_ARCH_STACKLEAK LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS LoongArch: Add SCHED_MC (Multi-core scheduler) support LoongArch: Add some annotations in archhelp LoongArch: Using generic scripts/install.sh in `make install` LoongArch: Add a default install.sh 
Pull LoongArch updates from Huacai Chen:

 - Adjust the 'make install' operation

 - Support SCHED_MC (Multi-core scheduler)

 - Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS

 - Enable HAVE_ARCH_STACKLEAK

 - Increase max supported CPUs up to 2048

 - Introduce the numa_memblks conversion

 - Add PWM controller nodes in dts

 - Some bug fixes and other small changes

* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  platform/loongarch: laptop: Unregister generic_sub_drivers on exit
  platform/loongarch: laptop: Add backlight power control support
  platform/loongarch: laptop: Get brightness setting from EC on probe
  LoongArch: dts: Add PWM support to Loongson-2K2000
  LoongArch: dts: Add PWM support to Loongson-2K1000
  LoongArch: dts: Add PWM support to Loongson-2K0500
  LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
  LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
  LoongArch: Preserve firmware configuration when desired
  LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
  LoongArch: Introduce the numa_memblks conversion
  LoongArch: Increase max supported CPUs up to 2048
  LoongArch: Enable HAVE_ARCH_STACKLEAK
  LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
  LoongArch: Add SCHED_MC (Multi-core scheduler) support
  LoongArch: Add some annotations in archhelp
  LoongArch: Using generic scripts/install.sh in `make install`
  LoongArch: Add a default install.sh