Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, most of the bug fixes address issues in the devicetree
  files, and out of these, most are for the Qualcomm and NXP platforms,
  including:

   - A missing 'reserved-memory' property on LG G Watch R that is needed
     to prevent clashing with firmware

   - Annotations for cache coherency on multiple machines

   - Corrections for pinctrl, regulator, clock, iommu and power domain
     properties for i.MX and Qualcomm to correctly reflect the hardware
     settings

   - Firmware file names on multiple machines SA8540P Ride board

   - An incompatible change to the qcom vadc driver requires adding
     individual labels

   - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
     and switch to the new bindings.

   - A fix for PCI bus address translation Tegra194 and Tegra234.

  There are also a couple of device driver fixes, addressing:

   - A race condition in the amdtee driver

   - A performance regression in the Qualcomm 'llcc' driver

   - An unitialized variable use NXP i.MX 'weim' driver

   - Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
     the Arm scmi firmware driver"

* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
  bus: imx-weim: fix branch condition evaluates to a garbage value
  arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
  ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
  arm64: dts: imx93: Fix eqos properties
  arm64: dts: imx8mp: Fix LCDIF2 node clock order
  arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
  arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
  firmware: qcom: scm: fix bogus irq error at probe
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  ...

Pull EFI fixes from Ard Biesheuvel:

 - Set the NX compat flag for arm64 and zboot, to ensure compatibility
   with EFI firmware that complies with tightening requirements imposed
   across the ecosystem.

 - Improve identification of Ampere Altra systems based on SMBIOS data.

 - Fix some issues related to the EFI framebuffer that were introduced
   as a result from some refactoring related to zboot and the merge with
   sysfb.

 - Makefile tweak to avoid rebuilding vmlinuz unnecessarily.

 - Fix efi_random_alloc() return value on out of memory condition.

* tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure
  efi/libstub: Use relocated version of kernel's struct screen_info
  efi/libstub: zboot: Add compressed image to make targets
  efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
  efi: sysfb_efi: Fix DMI quirks not working for simpledrm
  efi/libstub: smbios: Drop unused 'recsize' parameter
  arm64: efi: Use SMBIOS processor version to key off Ampere quirk
  efi/libstub: smbios: Use length member instead of record struct size
  efi: earlycon: Reprobe after parsing config tables
  arm64: efi: Set NX compat flag in PE/COFF header
  efi/libstub: arm64: Remap relocated image with strict permissions
  efi/libstub: zboot: Mark zboot EFI application as NX compatible

Qualcomm driver fixes for v6.3

Support for the secure world interrupting the SCM driver drive the wait
queue mechanism was recently introduced, but most platforms doesn't have
this mechanism and an error should not be printed in the log.

The rmtfs_mem driver recently gained support for assigning the region to
multiple VMIDs, but accidentally removed the support for running without
assignment. A couple of changes are introducd to correct this.

The SC8280XP LLCC slice configuration is wrong, reslting in incorrect
configuration of the hardware. The table is corrected, based on the
datasheet.

* tag 'qcom-driver-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  firmware: qcom: scm: fix bogus irq error at probe
  soc: qcom: rmtfs: handle optional qcom,vmid correctly
  soc: qcom: rmtfs: fix error handling reading qcom,vmid
  soc: qcom: llcc: Fix slice configuration values for SC8280XP

Link: https://lore.kernel.org/r/20230323142505.1086072-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The logic in efi_random_alloc() will iterate over the memory map twice,
once to count the number of candidate slots, and another time to locate
the chosen slot after randomization.

If there is insufficient memory to do the allocation, the second loop
will run to completion without actually having located a slot, but we
currently return EFI_SUCCESS in this case, as we fail to initialize
status to the appropriate error value of EFI_OUT_OF_RESOURCES.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

In some cases, we expose the kernel's struct screen_info to the EFI stub
directly, so it gets populated before even entering the kernel.  This
means the early console is available as soon as the early param parsing
happens, which is nice. It also means we need two different ways to pass
this information, as this trick only works if the EFI stub is baked into
the core kernel image, which is not always the case.

Huacai reports that the preparatory refactoring that was needed to
implement this alternative method for zboot resulted in a non-functional
efifb earlycon for other cases as well, due to the reordering of the
kernel image relocation with the population of the screen_info struct,
and the latter now takes place after copying the image to its new
location, which means we copy the old, uninitialized state.

So let's ensure that the same-image version of alloc_screen_info()
produces the correct screen_info pointer, by taking the displacement of
the loaded image into account.

Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/linux-efi/20230310021749.921041-1-chenhuacai@loongson.cn/
Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Avoid needlessly rebuilding the compressed image by adding the file
'vmlinuz' to the 'targets' Kbuild make variable.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.

This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.

To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.

Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: stable@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

We no longer use the recsize argument for locating the string table in
an SMBIOS record, so we can drop it from the internal API.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Instead of using the SMBIOS type 1 record 'family' field, which is often
modified by OEMs, use the type 4 'processor ID' and 'processor version'
fields, which are set to a small set of probe-able values on all known
Ampere EFI systems in the field.

Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>