Pull more RISC-V updates from Palmer Dabbelt:

 - The kernel now dynamically probes for misaligned access speed, as
   opposed to relying on a table of known implementations.

 - Support for non-coherent devices on systems using the Andes AX45MP
   core, including the RZ/Five SoCs.

 - Support for the V extension in ptrace(), again.

 - Support for KASLR.

 - Support for the BPF prog pack allocator in RISC-V.

 - A handful of bug fixes and cleanups.

* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
  soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
  riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
  riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
  riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
  bpf, riscv: use prog pack allocator in the BPF JIT
  riscv: implement a memset like function for text
  riscv: extend patch_text_nosync() for multiple pages
  bpf: make bpf_prog_pack allocator portable
  riscv: libstub: Implement KASLR by using generic functions
  libstub: Fix compilation warning for rv32
  arm64: libstub: Move KASLR handling functions to kaslr.c
  riscv: Dump out kernel offset information on panic
  riscv: Introduce virtual kernel mapping KASLR
  RISC-V: Add ptrace support for vectors
  soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
  cache: Add L2 cache management for Andes AX45MP RISC-V core
  dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
  riscv: mm: dma-noncoherent: nonstandard cache operations support
  riscv: errata: Add Andes alternative ports
  riscv: asm: vendorid_list: Add Andes Technology to the vendors list
  ...

Alexandre Ghiti <alexghiti@rivosinc.com> says:

The following KASLR implementation allows to randomize the kernel mapping:

- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
  provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
  hence the patch 3 factorizes KASLR related functions for riscv to take
  advantage.

The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.

* b4-shazam-merge:
  riscv: libstub: Implement KASLR by using generic functions
  libstub: Fix compilation warning for rv32
  arm64: libstub: Move KASLR handling functions to kaslr.c
  riscv: Dump out kernel offset information on panic
  riscv: Introduce virtual kernel mapping KASLR

Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

We can now use arm64 functions to handle the move of the kernel physical
mapping: if KASLR is enabled, we will try to get a random seed from the
firmware, if not possible, the kernel will be moved to a location that
suits its alignment constraints.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-6-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Fix the following warning which appears when compiled for rv32 by using
unsigned long type instead of u64.

../drivers/firmware/efi/libstub/efi-stub-helper.c: In function 'efi_kaslr_relocate_kernel':
../drivers/firmware/efi/libstub/efi-stub-helper.c:846:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  846 |                            (u64)_end < EFI_ALLOC_LIMIT) {

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This prepares for riscv to use the same functions to handle the pĥysical
kernel move when KASLR is enabled.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.6-rc1.

  Stuff all over the place here, lots of driver updates and changes and
  new additions. Short summary is:

   - new IIO drivers and updates

   - Interconnect driver updates

   - fpga driver updates and additions

   - fsi driver updates

   - mei driver updates

   - coresight driver updates

   - nvmem driver updates

   - counter driver updates

   - lots of smaller misc and char driver updates and additions

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
  nvmem: core: Notify when a new layout is registered
  nvmem: core: Do not open-code existing functions
  nvmem: core: Return NULL when no nvmem layout is found
  nvmem: core: Create all cells before adding the nvmem device
  nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
  dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  dt-bindings: nvmem: Add compatible for QCM2290
  nvmem: Kconfig: Fix typo "drive" -> "driver"
  nvmem: Explicitly include correct DT includes
  nvmem: add new NXP QorIQ eFuse driver
  dt-bindings: nvmem: Add t1023-sfp efuse support
  dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
  nvmem: qfprom: do some cleanup
  nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
  nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
  nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
  nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
  nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
  ...

Pull pin control updates from Linus Walleij:
 "We have some patches to DTS[I] files in arm and arm64 as well, that
  were merged here as DT headers were being changed.

  The most interesting stuff is the Intel Tangier chip support and
  AMLogic C3 in my opinion.

  No core changes this time.

  Drivers:

   - Intel Tangier SoC pin control support

   - AMLogic C3 SoC pin control support

   - Texas Instruments AM654 SoC pin control support

   - Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
     control support

   - Qualcomm PMX75 and PM7550BA (Power Management) pin control support

   - Qualcomm PMC8180 and PMC8180C (Power Management) pin control
     support

   - DROP the Oxnas driver as there is not enough of community interest
     to keep carrying this ARM(11) port

  Enhancements:

   - Bias control in the MT7986 pin control driver

   - Misc device tree binding enhancements such as the Broadcom 11351
     being converted to YAML

   - New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use

   - Clean up some SPDX headers

   - Handle non-unique devicetree subnode names in two Renesas drivers"

* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl: mlxbf3: Remove gpio_disable_free()
  pinctrl: use capital "OR" for multiple licenses in SPDX
  dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
  pinctrl: cherryview: fix address_space_handler() argument
  pinctrl: intel: consolidate ACPI dependency
  pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: mediatek: assign functions to configure pin bias on MT7986
  pinctrl: mediatek: fix pull_type data for MT7981
  dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
  dt-bindings: pinctrl: Drop 'phandle' properties
  pinctrl: lynxpoint: Make use of pm_ptr()
  pinctrl: baytrail: Make use of pm_ptr()
  pinctrl: intel: Switch to use exported namespace
  pinctrl: lynxpoint: reuse common functions from pinctrl-intel
  pinctrl: cherryview: reuse common functions from pinctrl-intel
  ...

Pull ARM SoC cleanups from Arnd Bergmann:
 "These are all minor cleanups for platform specific code in arch/arm/
  and some of the associated drivers. The majority of these are work
  done by Rob Herring to improve the way devicetreee header files are
  handled"

* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
  ARM: davinci: Drop unused includes
  ARM: s5pv210: Explicitly include correct DT includes
  ARM: dove: Drop unused includes
  ARM: mvebu: Explicitly include correct DT includes
  Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
  MAINTAINER: samsung: document dtbs_check requirement for Samsung
  Documentation/process: maintainer-soc: add clean platforms profile
  MAINTAINERS: soc: reference maintainer profile
  ARM: nspire: Remove unused header file mmio.h
  ARM: nspire: Use syscon-reboot to handle restart
  soc: fsl: Explicitly include correct DT includes
  soc: xilinx: Explicitly include correct DT includes
  soc: sunxi: Explicitly include correct DT includes
  soc: rockchip: Explicitly include correct DT includes
  soc: mediatek: Explicitly include correct DT includes
  soc: aspeed: Explicitly include correct DT includes
  firmware: Explicitly include correct DT includes
  bus: Explicitly include correct DT includes
  ARM: spear: Explicitly include correct DT includes
  ARM: mvebu: Explicitly include correct DT includes
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...

Pull ARM SoC generic power domain driver updates from Ulf Hansson:
 "This adds a new subsystem for generic power domain providers in
  drivers/genpd and starts moving some of the corresponding code in
  there.

  We have currently ~60 users of the genpd provider interface, which are
  sprinkled across various subsystems. To release some burden from the
  soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
  better overall view of what goes on in the area, I will help out with
  maintenance"

[ I find the "genpd" name singularly uninformative, so we'll probably
  end up moving this driver subsystem somewhere else, but that's still
  being discussed  - Linus ]

* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
  genpd: ti: Use for_each_node_with_property() simplify code logic
  genpd: Explicitly include correct DT includes
  genpd: imx: scu-pd: initialize is_off according to HW state
  genpd: imx: scu-pd: Suppress bind attrs
  genpd: imx: scu-pd: do not power off console if no_console_suspend
  genpd: imx: scu-pd: add more PDs
  genpd: imx: scu-pd: enlarge PD range
  genpd: imx: relocate scu-pd under genpd
  MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
  genpd: Makefile: build imx
  genpd: move owl-sps-helper.c from drivers/soc
  soc: starfive: remove stale Makefile entry
  ARM: ux500: Move power-domain driver to the genpd dir
  ARM: ux500: Convert power-domain code into a regular platform driver
  soc: xilinx: Move power-domain driver to the genpd dir
  soc: ti: Mover power-domain drivers to the genpd dir
  soc: tegra: Move powergate-bpmp driver to the genpd dir
  soc: sunxi: Move power-domain driver to the genpd dir
  soc: starfive: Move the power-domain driver to the genpd dir
  soc: samsung: Move power-domain driver to the genpd dir
  ...